Page 1 of 1

546/2 engine tin side standing covers

Posted: Mon May 27, 2024 8:43 am
by ThibautBoey
hello,

pre-assembling a 546/2 to see if I have everything before the next step...
I note that the side standing covers( number 23 in the parts manual) are different from each side. have 2 identical and 1 does not fit. i suspect they will differ due cilinder set up/arrangement.

otherwise I have 1 to trade :D


thanks for the info.

Thibaut

Re: 546/2 engine tin side standing covers

Posted: Tue May 28, 2024 7:40 am
by Vic Skirmants
That piece should be identical side-to-side.

Re: 546/2 engine tin side standing covers

Posted: Tue May 28, 2024 8:03 am
by Martin Benade
You need to manipulate the cylinder tins until the side pieces go into place.

Re: 546/2 engine tin side standing covers

Posted: Wed May 29, 2024 2:12 pm
by ThibautBoey
I was too careful. It is wriggling to make fit but it worked.
thanks!