Separating Mirror From Stem
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Separating Mirror From Stem
I am trying to separate the day/night break away mirror head from its stem. I assume it is a screw fitting that connects the mirror to the stem. I have tried unscrewing the mirror from its stem but with no luck. Any suggestions will be greatly appreciated. Thanks.
- Martin Benade
- 356 Fan
- Posts: 12392
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: Separating Mirror From Stem
I unscrewed one like that, the stem off the mounting bracket. I’d assume they are all that way but you never know.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
- Mike Wilson
- Classifieds Monitor
- Posts: 11637
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Separating Mirror From Stem
The "stub" on the mirror should have flats so you can use a wrench to unscrew from the stem.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Re: Separating Mirror From Stem
Thanks guys. I tried using a wrench but it doesn't budge. I will try again.
- Mike Wilson
- Classifieds Monitor
- Posts: 11637
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Separating Mirror From Stem
Try using a penetrant like Kroil to loosen it up.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Re: Separating Mirror From Stem
I tried. It has fused together, assuming I have been unscrewing the two pieces in the right direction.
- Mike Wilson
- Classifieds Monitor
- Posts: 11637
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Separating Mirror From Stem
Maybe try a little heat plus a penetrant. It should unscrew clockwise when oriented as in your pic.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Re: Separating Mirror From Stem
Thanks Mike for the suggestions.
- Mike Wilson
- Classifieds Monitor
- Posts: 11637
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles