356 Full Sheet Metal CAD Model?
-
- 356 Fan
- Posts: 2
- Joined: Tue Oct 04, 2022 9:49 am
- Location: NC
356 Full Sheet Metal CAD Model?
I am searching for a full 356 sheet metal structure CAD file to import, preferably an early coupe but anything would be useful. I would like to layout a roll cage and other bits for a Carrera Panamericana build. Appreciate any leads. Thanks! Campuzano.pedro@gmail.com
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
Re: 356 Full Sheet Metal CAD Model?
I'm sure that there are several people who have digitized the 356, at least the outer skin. I don't know of any though ...
Greg Bryan
-
- Classifieds Moderator
- Posts: 549
- Joined: Thu Mar 27, 2008 12:39 pm
- Location: Austrailia
Re: 356 Full Sheet Metal CAD Model?
Don't know how accurate they are but here is a link. This one for a speedster but there are other 356s too
https://www.3dcadbrowser.com/3d-model/p ... dster-1957
https://www.3dcadbrowser.com/3d-model/p ... dster-1957
-
- 356 Fan
- Posts: 2
- Joined: Tue Oct 04, 2022 9:49 am
- Location: NC
Re: 356 Full Sheet Metal CAD Model?
Thanks, I may end up scanning the car. I’m sure there are at least two who have but due to business reasons may not want to share freely.
-
- 356 Fan
- Posts: 28
- Joined: Sun Mar 14, 2021 12:51 am
Re: 356 Full Sheet Metal CAD Model?
Look up on YouTube Dominic Chinea he has recently scanned his 356A coupe and made an episode of how it was done, I would see no harm in asking him for a copy
- Jacques Lefriant
- 356 Fan
- Posts: 4665
- Joined: Mon Dec 06, 2010 1:50 pm
- Location: Washoe county NV