engine vent covers

[Robert Shaw]

does anyone know who manufactures engine covers - stainless steel mesh

download/file.php?mode=view&id=99834

thanks

[Mike Wilson]

Looks like the frame is from a stock grill. The mesh is probably available from McMaster Carr and others.

Mike

[Martin Benade]

I think you’d be on your own to get one fabricated.

[Jim Hohensee]

I think that small a mesh screen would seriously effect the air passage. I was researching McMaster for something similiar to use for a front mounted oil cooler and they give the % air flow for most of their screens. Its amazing how restrictive even a 1/4 inch mesh can be.

[jim nelson]

I think that small a mesh screen would seriously effect the air passage. I was researching McMaster for something similiar to use for a front mounted oil cooler and they give the % air flow for most of their screens. Its amazing how restrictive even a 1/4 inch mesh can be.

Actually, the temperature in this SoCal car hasn’t seen any significant variation from the stock oil temp.

[Steve Casper]

I think that small a mesh screen would seriously effect the air passage. I was researching McMaster for something similiar to use for a front mounted oil cooler and they give the % air flow for most of their screens. Its amazing how restrictive even a 1/4 inch mesh can be.

Actually, the temperature in this SoCal car hasn’t seen any significant variation from the stock oil temp.

4D88FD7B-A29B-4AA0-8B2C-0731EA21024E.jpeg

I would think the louvers would make up for any difference in the screen's airflow. Very nice look!