How to Remove Mirror From Its Housing
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
How to Remove Mirror From Its Housing
What is the best way to remove the mirror from its housing. I was able to get a thin blade around the mirror's perimeter but the mirror doesn't budge. Any help will be greatly appreciated. Thanks.
- Mike Wilson
- Classifieds Monitor
- Posts: 11636
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: How to Remove Mirror From Its Housing
Just guessing that the glass is glued into the housing. I have a very thin flexible blade knife I used in the Talbot Berlin mirror. I'll take a pic of it.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Re: How to Remove Mirror From Its Housing
Mike, you are the answer man. I managed to get a thin blade around the edge of the mirror but the mirror doesn't budge. How do I proceed from there? I applied some heat to the housing but that didn't do a thing.
- Mike Wilson
- Classifieds Monitor
- Posts: 11636
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: How to Remove Mirror From Its Housing
Pics of the thin-bladed flexible knife.
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Martin Benade
- 356 Fan
- Posts: 12390
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: How to Remove Mirror From Its Housing
Isn’t that the style where the metal housing is lightly rolled over the bevel? I’m pretty sure the glass is trapped.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Re: How to Remove Mirror From Its Housing
It is, but I have managed to push the edge back away from the glass and the mirror doesn't budge. It must also be glued into place.
- Mike Wilson
- Classifieds Monitor
- Posts: 11636
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: How to Remove Mirror From Its Housing
If it's glued, maybe slightly heating the housing with a hair dryer or heat gun and wicking in a solvent would dissolve the glue?
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Re: How to Remove Mirror From Its Housing
I tried heating the housing with a heat gun but it didn't do anything.
- Mike Wilson
- Classifieds Monitor
- Posts: 11636
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: How to Remove Mirror From Its Housing
I would guess that you would need to get it very hot to melt any adhesive. That's why I suggested something to dissolve any adhesive. Heck, even nail polish remover might work. Just keep any solvent away from the day/night plastic tab.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
Re: How to Remove Mirror From Its Housing
I talked with Victor Miles some years ago about having my mirror restored. For those who don’t know, Victor does incredible concours level restorations on many components.
He said he would need two mirrors to get the job done, one being a donor for the glass and your original. I assume he cut the donor glass out to have it resilvered and was able to get it back into the original mirror body after breaking out the original glass and restoring the body.
I ended up buying the excellent reproduction from Stoddard
He said he would need two mirrors to get the job done, one being a donor for the glass and your original. I assume he cut the donor glass out to have it resilvered and was able to get it back into the original mirror body after breaking out the original glass and restoring the body.
I ended up buying the excellent reproduction from Stoddard
Greg Bryan
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Re: How to Remove Mirror From Its Housing
I am sure at this point Victor has patterns for the various mirrors he is asked to replace. I contacted Victor but he said he is swamped with work. I suppose one could break the mirror glass to get it out and then have a replacement made by creating a facsimile made out of a thin cardboard or some other material to use as a guide.
- Mike Wilson
- Classifieds Monitor
- Posts: 11636
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: How to Remove Mirror From Its Housing
That's not a bad idea, Peter.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
-
- 356 Fan
- Posts: 2212
- Joined: Sat Oct 26, 2013 9:34 pm
- Location: Monterey, CA
Re: How to Remove Mirror From Its Housing
Peter, another approach would be to make a pattern based on the opening, then increase it by some amount, based on your observations. I bet you could come pretty close, probably within the tolerances of mirrors used in the original manufacturing. *then* break the old mirror out using an automatic center punch or similar.
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Re: How to Remove Mirror From Its Housing
Thanks Dave. I may give it a try.
-
- 356 Fan
- Posts: 2212
- Joined: Sat Oct 26, 2013 9:34 pm
- Location: Monterey, CA
Re: How to Remove Mirror From Its Housing
Peter, thinking about it some more, it would be useful to make two patterns; one as described above and the other of the flat portion of the glass. If they were adhesive film with a backing, you could use one pattern to cut out the glass and the second to grind the relief.