912 engine case
- Al Zim
- 356 Fan
- Posts: 4356
- Joined: Thu Mar 27, 2008 12:37 pm
- Location: FT.WORTH/DALLAS TEXAS
- Contact:
Re: 912 engine case
There is more to getting the engine to run properly than jetting the carburetors. The distributor will probably need to be serviced. An aftermarket distributor may be a wise choice if your is completely worn out. Camshaft design is important for correct running at high or low speed as well as having the cam followers (AKA lifters) with the correct radius. A great deal depends on assembling the engine. Get someone with a lot of experience to assist you. TREAT THE SHOP MANUAL AS IF IT IS YOUR BIBLE...WHITCH IT IS. Money correctly spent will leed to a Porsche that will make you smile owning and when it comes time to sell. Zim
www.allzim.com
356 Parts and Services
www.facebook.com/ZimsAuto/
www.instagram.com/zims_autotechnik/
356 Parts and Services
www.facebook.com/ZimsAuto/
www.instagram.com/zims_autotechnik/
-
- 356 Fan
- Posts: 37
- Joined: Wed Jan 22, 2020 9:57 pm
- Location: CA
Re: 912 engine case
Thank you, I will heed your advise, Jorge
- George Hussey
- 356 Fan
- Posts: 755
- Joined: Tue Mar 24, 2009 12:22 pm
- Location: atlanta georgia
- Contact:
Re: 912 engine case
if you have the three piece matching case, I would certainly use it, just have to switch to the 65 356 electric tachometer. Factory matched pieces sure make it easier to assembly and work
George Hussey