Ride height
- Wes Bender
- 356 Fan
- Posts: 4941
- Joined: Wed Aug 27, 2008 10:54 am
- Location: Somewhere in the Gadsden Purchase, USA
Re: Ride height
CS and SCs came from the factory with the same ride height.
Some days it's just not worth chewing through the restraints.....
-
- 356 Fan
- Posts: 167
- Joined: Tue Sep 15, 2020 3:28 am
- Location: Leeds, UK
Re: Ride height
Thanks, Wes.
Reviewing the previous post it’s looking like the rear stock height for a T6 is around 21.75”, can anyone confirm this?
I’ve been to measure mine and it’s measuring at 20.75”.
Has it been lowered or could worn rear shock absorbers cause this? I assume it’s probably been lowered?
Side view comparison
Mine:
Another SC:
Reviewing the previous post it’s looking like the rear stock height for a T6 is around 21.75”, can anyone confirm this?
I’ve been to measure mine and it’s measuring at 20.75”.
Has it been lowered or could worn rear shock absorbers cause this? I assume it’s probably been lowered?
Side view comparison
Mine:
Another SC:
Last edited by Rob Underwood on Mon Nov 21, 2022 7:23 pm, edited 3 times in total.
- Martin Benade
- 356 Fan
- Posts: 12390
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: Ride height
The standard shocks have no bearing on height, modern gas pressure ones might Ari’s it 1/4”. It seems to me that the factory height was not that consistent, possibly more than a 1 inch range. Yours looks like the low end of normal but in my mind could be factory. It looks right where I’d set mine.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna