Rubber Channel Restoration Tool
-
- 356 Fan
- Posts: 668
- Joined: Wed Apr 30, 2008 7:02 am
- Location: Washington DC Area
Rubber Channel Restoration Tool
CNC machined steel tool that restores both the interior and exterior perimeter channels for the sealing rubber on 356 engines. $30.00 plus $8.45 USPS.
Scroll down to post by V. Canzanese III to see pictures of tool.
Tim Berardelli
703-257-5100
TBR356@hotmail.com
Scroll down to post by V. Canzanese III to see pictures of tool.
Tim Berardelli
703-257-5100
TBR356@hotmail.com
Last edited by Tim Berardelli on Fri Jun 25, 2021 4:32 pm, edited 2 times in total.
- Martin Benade
- 356 Fan
- Posts: 12348
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: Rubber Channel Restoration Tool
Hi Tim. Could you describe it further and put in a picture please? It’s a cutter to use on the rubber, or the body aperture for the rubber?
Now it is crystal clear what it is after your edit. A useful tool I am sure.
Now it is crystal clear what it is after your edit. A useful tool I am sure.
Last edited by Martin Benade on Thu Jun 24, 2021 11:59 am, edited 1 time in total.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
-
- 356 Fan
- Posts: 668
- Joined: Wed Apr 30, 2008 7:02 am
- Location: Washington DC Area
Re: Rubber Channel Restoration Tool
Martin,
Tool is inserted into the channel where the perimeter rubber seal is installed and then pushed or as a rule knocked thru the channel with a small hammer to restore the original interior dimensions. Exterior, cosmetic, issues with the channel (pry marks) can be addressed by leaving the tool, now acting as a buck, in the channel and "metal working" the exterior of the channel. Picture soon.
Tim B.
Tool is inserted into the channel where the perimeter rubber seal is installed and then pushed or as a rule knocked thru the channel with a small hammer to restore the original interior dimensions. Exterior, cosmetic, issues with the channel (pry marks) can be addressed by leaving the tool, now acting as a buck, in the channel and "metal working" the exterior of the channel. Picture soon.
Tim B.
- Joris Koning
- 356 Fan
- Posts: 2514
- Joined: Thu Mar 27, 2008 12:38 pm
- Location: Netherlands
Re: Rubber Channel Restoration Tool
Tim,
Great tool. I will take two.
Joris
Great tool. I will take two.
Joris
'56 Coupe
'57 Coupe
'59 Cab
'60 Coupe
'57 Coupe
'59 Cab
'60 Coupe
- Harlan Halsey
- 356 Fan
- Posts: 2371
- Joined: Fri Mar 02, 2012 2:05 pm
- Location: No Cal SF Peninsula
Re: Rubber Channel Restoration Tool
Tim,
Sounds like a useful tool, I'll take one.
Sounds like a useful tool, I'll take one.
-
- 356 Fan
- Posts: 338
- Joined: Tue Mar 25, 2008 6:14 pm
Re: Rubber Channel Restoration Tool
I will take one also Tim.
Michael Foster
1002 N. Ross St.
Santa Ana, Ca 92701
mfoster356@yahoo.com
714 235 6814
Paypal?
Michael Foster
1002 N. Ross St.
Santa Ana, Ca 92701
mfoster356@yahoo.com
714 235 6814
Paypal?
MICHAEL FOSTER
- Jim Clement
- 356 Fan
- Posts: 1471
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
-
- 356 Fan
- Posts: 600
- Joined: Wed Mar 26, 2008 1:35 am
- Location: Colorado
Re: Rubber Channel Restoration Tool
I think a similar tool for straightening out deco channels will sell well.
Jan Kolm
356 Registry #1066
1960 1600N Coupe
356 Registry #1066
1960 1600N Coupe
- Joris Koning
- 356 Fan
- Posts: 2514
- Joined: Thu Mar 27, 2008 12:38 pm
- Location: Netherlands
-
- 356 Fan
- Posts: 14
- Joined: Mon Jul 03, 2017 9:57 pm
- Location: South Jersey
Re: Rubber Channel Restoration Tool
As per Tim, here are some pictures.
- Al Zim
- 356 Fan
- Posts: 4360
- Joined: Thu Mar 27, 2008 12:37 pm
- Location: FT.WORTH/DALLAS TEXAS
- Contact:
Re: Rubber Channel Restoration Tool
According to the inventor you are going to put tis in the track of the sheet metal and with a hammer (I think small) and knock it the length of the channel that holds the rubber. How do you hold the front and rear sheet metal on the 356 that is curved? A response would be appreciated. Thanks al zim
www.allzim.com
356 Parts and Services
www.facebook.com/ZimsAuto/
www.instagram.com/zims_autotechnik/
356 Parts and Services
www.facebook.com/ZimsAuto/
www.instagram.com/zims_autotechnik/
-
- 356 Fan
- Posts: 2210
- Joined: Sat Oct 26, 2013 9:34 pm
- Location: Monterey, CA
Re: Rubber Channel Restoration Tool
Al, I have one of the tools, and it works well. I held the rear pan in one hand and tapped the tool with a hammer, working it through the channel. I also used a pair of duck bill pliers to do a bit of pre-straightening.
-
- Registry President
- Posts: 432
- Joined: Sun Mar 29, 2009 5:48 pm
- Location: Fallbrook, California
- Contact:
Re: Rubber Channel Restoration Tool
I have one also and it works pretty well. A little tight around corners and I would like it more if the edges had a bit more radius.
Jim Wayman