Which Lug 19 mm Wrench is Correct for a 356
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Which Lug 19 mm Wrench is Correct for a 356
I have two identical looking 19mm lug wrenches. Which one is correct for the 356? The one that is marked 19mm or the one that is marked 19 m/m? Thanks.
- Tom Keating
- 356 Fan
- Posts: 381
- Joined: Wed Mar 26, 2008 3:13 pm
- Location: Jacksonville,Florida
Re: Which Lug 19 mm Wrench is Correct for a 356
I have seen quite a few of the 63 wrenches. I have not seen the slash. It looks like the wrench for the black 63 wrench . The difference in the angle of the socket looks to be the same as a 63. Other one is typical of the 64/65 and swb 911/912.
Tom Keating
1964 356C Sunroof
1964 356C Sunroof
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Re: Which Lug 19 mm Wrench is Correct for a 356
Thanks Tom, I think you are correct. The 19mm came out of a 65 911 toolkit. I guess that means that the 19 m/m is the one that goes with the 63 356 toolkit and is black.
- Tom Keating
- 356 Fan
- Posts: 381
- Joined: Wed Mar 26, 2008 3:13 pm
- Location: Jacksonville,Florida
Re: Which Lug 19 mm Wrench is Correct for a 356
This is an example of what I have come across. Note the weld bottom. This came from a original low mile 63. Also, the jack has the early spring on it. Perhaps they were using up stock.
Tom Keating
1964 356C Sunroof
1964 356C Sunroof
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Re: Which Lug 19 mm Wrench is Correct for a 356
The one in the middle is the 356 jack, is that correct? Or are both of the black jacks "correct" for the 356?
- Tom Keating
- 356 Fan
- Posts: 381
- Joined: Wed Mar 26, 2008 3:13 pm
- Location: Jacksonville,Florida
Re: Which Lug 19 mm Wrench is Correct for a 356
both black handles came from low mile cars. The one with welded ring was from a California cab . I forgot exactly where the middle one came from. I have done too many of them and did not do notes,just pics.
Tom Keating
1964 356C Sunroof
1964 356C Sunroof
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Re: Which Lug 19 mm Wrench is Correct for a 356
This is a photo of the lug wrench shown on 356tools.com. That is the one marked 19m/m.
-
- 356 Fan
- Posts: 600
- Joined: Wed Mar 26, 2008 1:35 am
- Location: Colorado
Re: Which Lug 19 mm Wrench is Correct for a 356
Adding another data point--I just verified the lug wrench from my brother's long-departed '63 is stamped 19m/m
Jan Kolm
356 Registry #1066
1960 1600N Coupe
356 Registry #1066
1960 1600N Coupe