Page 1 of 1
356B Fuel Pump Rebuild?
Posted: Fri Dec 31, 2021 1:52 pm
by Richard Wisniewski
Who are the vendors that Rebuild 356B Fuel Pumps?
Than you.
Rich Wisniewski
1960 356B Roadster
No. 87284
Registery Member No. 2275
Re: 356B Fuel Pump Rebuild?
Posted: Fri Dec 31, 2021 1:58 pm
by Doug McDonnell
Re: 356B Fuel Pump Rebuild?
Posted: Mon Jan 03, 2022 7:16 am
by John Clarke
Hi Richard
Why not rebuild it yourself with one of the Repair Kits available. Just refurbished / Rebuilt our late Style Pump.
It isn't 'Rocket Science' !
Regards Jay
Re: 356B Fuel Pump Rebuild?
Posted: Mon Jan 03, 2022 9:13 am
by Bill Lawless
Several rebuild kit available, takes less then an hour with detailed cleaning..
Re: 356B Fuel Pump Rebuild?
Posted: Wed Jan 05, 2022 6:48 pm
by Brad Ripley
Rebuild kits for the early pump were received only today. -- p/n NLA 108 903 00 For the late pump the kit is: NLA 108 903 01
Re: 356B Fuel Pump Rebuild?
Posted: Sat Jan 22, 2022 5:03 pm
by Al Zim
I is not just take it apart and put it together. You should have a thick piece of glass and some reasonably fine wet dry automotive finish paper. You will also need a small stone like is used on a sink handle valve to make sure the opening in the top of the pump is flat for the valve to seat against. Otherwise the fuel pressure will be low. You can measure the fuel pump stroke with a 150 MM machinist scale. When assembling the pump the gasket should lay flat against the bottom of the pump.