Who are the vendors that Rebuild 356B Fuel Pumps?
Than you.
Rich Wisniewski
1960 356B Roadster
No. 87284
Registery Member No. 2275
356B Fuel Pump Rebuild?
-
- 356 Fan
- Posts: 43
- Joined: Fri May 02, 2008 9:32 pm
- Location: FL
356B Fuel Pump Rebuild?
Rich Wisniewski
- Doug McDonnell
- 356 Fan
- Posts: 6061
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: 356B Fuel Pump Rebuild?
I know that Bruce does: http://www.sparkingplugs.com/6.html
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
- John Clarke
- 356 Fan
- Posts: 2115
- Joined: Wed Aug 27, 2008 6:38 am
- Location: East Sussex, England
- Contact:
Re: 356B Fuel Pump Rebuild?
Hi Richard
Why not rebuild it yourself with one of the Repair Kits available. Just refurbished / Rebuilt our late Style Pump.
It isn't 'Rocket Science' !
Regards Jay
Why not rebuild it yourself with one of the Repair Kits available. Just refurbished / Rebuilt our late Style Pump.
It isn't 'Rocket Science' !
Regards Jay
- Bill Lawless
- 356 Fan
- Posts: 951
- Joined: Mon Oct 25, 2010 10:17 pm
- Location: Northern Vermont
Re: 356B Fuel Pump Rebuild?
Several rebuild kit available, takes less then an hour with detailed cleaning..
Thanks,
Bill
65' 356 SC Cab Irish Green
82' SC Targa
81 VW Westfalia with 2015 Forester Engine
BMW 64'-R50/2, 75'-BMW R90/6, 74' BMW R90/6, Yamaha BW350
Bill
65' 356 SC Cab Irish Green
82' SC Targa
81 VW Westfalia with 2015 Forester Engine
BMW 64'-R50/2, 75'-BMW R90/6, 74' BMW R90/6, Yamaha BW350
-
- 356 Fan
- Posts: 4205
- Joined: Tue Mar 25, 2008 9:28 pm
Re: 356B Fuel Pump Rebuild?
Rebuild kits for the early pump were received only today. -- p/n NLA 108 903 00 For the late pump the kit is: NLA 108 903 01
- Al Zim
- 356 Fan
- Posts: 4309
- Joined: Thu Mar 27, 2008 12:37 pm
- Location: FT.WORTH/DALLAS TEXAS
- Contact:
Re: 356B Fuel Pump Rebuild?
I is not just take it apart and put it together. You should have a thick piece of glass and some reasonably fine wet dry automotive finish paper. You will also need a small stone like is used on a sink handle valve to make sure the opening in the top of the pump is flat for the valve to seat against. Otherwise the fuel pressure will be low. You can measure the fuel pump stroke with a 150 MM machinist scale. When assembling the pump the gasket should lay flat against the bottom of the pump.
www.allzim.com
356 Parts and Services
www.facebook.com/ZimsAuto/
www.instagram.com/zims_autotechnik/
356 Parts and Services
www.facebook.com/ZimsAuto/
www.instagram.com/zims_autotechnik/