I discovered that I have a leak from my steering box. It appears to be coming from around where the steering column connects into the box.
See attached photo. I don't remember there being a seal on that part of the box. Any suggestions on the cause of this leak?
Steering Box Leak
- Steve Nau
- 356 Fan
- Posts: 157
- Joined: Wed Sep 22, 2010 11:47 am
- Location: Louisville Kentucky
Steering Box Leak
- Attachments
-
- IMG_3323.jpg (1.97 MiB) Viewed 1655 times
- Jim Clement
- 356 Fan
- Posts: 1476
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
- Steve Nau
- 356 Fan
- Posts: 157
- Joined: Wed Sep 22, 2010 11:47 am
- Location: Louisville Kentucky
Re: Steering Box Leak
Yes. Thanks. Since posting this I searched the list of parts I bought and found that I bought this seal so maybe I botched the install.
- Jim Clement
- 356 Fan
- Posts: 1476
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
Re: Steering Box Leak
There was an excallant article on the Samba on how to do the rebuild, but I cannot find it anymore.
I have done two of them, it is just a matter of getting it out of the car, getting the Pitman arm off and dissasssembling and reassembling, making note of where the marks are when you dissasemble.
and a great time to clean up and repaint, although yours looks nic as is.
I have done two of them, it is just a matter of getting it out of the car, getting the Pitman arm off and dissasssembling and reassembling, making note of where the marks are when you dissasemble.
and a great time to clean up and repaint, although yours looks nic as is.
- Steve Nau
- 356 Fan
- Posts: 157
- Joined: Wed Sep 22, 2010 11:47 am
- Location: Louisville Kentucky
Re: Steering Box Leak
I removed the box and see now that there is no seal where the box is leaking. I replaced both seals when I did the rebuild and they are both dry.
The leak is around the upper flange. I see that the bottom of the flange in recessed. Is there something that should be in the recess to stop the leak?
The leak is around the upper flange. I see that the bottom of the flange in recessed. Is there something that should be in the recess to stop the leak?
- Attachments
-
- IMG_3730.jpg (634.56 KiB) Viewed 1079 times
-
- IMG_3732.jpg (537.06 KiB) Viewed 1079 times