1952 Coupe Restoration
-
- 356 Fan
- Posts: 66
- Joined: Mon Jan 26, 2015 12:09 am
- Location: Sydney, Australia
Re: 1952 Coupe Restoration
Also found this short thread from member Brady Owen who owns (owned?) the next car off the production line to mine. Brady has no contact details on his profile so if anyone has those, or knows of car 11510, It'd be great to have it as comparison.
http://forum.porsche356registry.org/vie ... im+bumpers
http://forum.porsche356registry.org/vie ... im+bumpers
- James Davies
- 356Talk Moderator
- Posts: 2951
- Joined: Thu Aug 15, 2013 9:15 am
- Location: Heidelberg, DE
Re: 1952 Coupe Restoration
Really interesting Scott! The bumper mount brackets on the side of the battery box are definitely different from the later '53 ones. I wonder if anyone else with an export bumper car can help confirm this layout?
One wonders why the front lower lip was removed! That's no small task, as it is leaded pretty heavily so that there's no seam in the couple inches in front of the wheel opening.
One wonders why the front lower lip was removed! That's no small task, as it is leaded pretty heavily so that there's no seam in the couple inches in front of the wheel opening.
-
- Classifieds Moderator
- Posts: 326
- Joined: Thu Mar 27, 2008 12:40 pm
- Location: Louisville KY
- Contact:
Re: 1952 Coupe Restoration
11270 is a export bumper car has the same bumper mount setup.
-
- 356 Fan
- Posts: 66
- Joined: Mon Jan 26, 2015 12:09 am
- Location: Sydney, Australia
Re: 1952 Coupe Restoration
Thanks for the pics Tony and that info Jim. Who knows why someone would take the lower strip panel off? Seems crazy but obviously made sense to someone at some point. (Like most Porsche mods!)
I'll look for any info as to why the bumper mounts are different to the ones Tony has pictured in the slightly earlier car. It's a bit of a lottery with these cars, seemed like they threw on whatever part was coming through at the time. That may be the case, or it may be part of the later front end modifications.
I'll look for any info as to why the bumper mounts are different to the ones Tony has pictured in the slightly earlier car. It's a bit of a lottery with these cars, seemed like they threw on whatever part was coming through at the time. That may be the case, or it may be part of the later front end modifications.
-
- 356 Fan
- Posts: 10
- Joined: Thu Jun 25, 2009 9:03 pm
- Location: Florida
Re: 1952 Coupe Restoration
Hi Scott:
I do not get to to the forum very often but a mutual friend sent me you posting. Thought my info might help. I have 11510 in primer but most of the car is here including both interim bumpers. My COA is likewise very sketchy, 11510 was also delivered through Max Hoffman in Fish Silver Gray with as near as I can guess, red carpets. I have been in an accumulation mode with this coupe attempting to find and fit some of the still missing parts. However, most of primary parts fortunate are still with the car.
I have been around 356's for quite a while and will attempt to answer questions if I can. This is the third pre "A" I have had, but 11510 is the oldest.
I do not get to to the forum very often but a mutual friend sent me you posting. Thought my info might help. I have 11510 in primer but most of the car is here including both interim bumpers. My COA is likewise very sketchy, 11510 was also delivered through Max Hoffman in Fish Silver Gray with as near as I can guess, red carpets. I have been in an accumulation mode with this coupe attempting to find and fit some of the still missing parts. However, most of primary parts fortunate are still with the car.
I have been around 356's for quite a while and will attempt to answer questions if I can. This is the third pre "A" I have had, but 11510 is the oldest.
-
- 356 Fan
- Posts: 66
- Joined: Mon Jan 26, 2015 12:09 am
- Location: Sydney, Australia
Re: 1952 Coupe Restoration
Wow, Brady thanks for getting into contact. I can already see the front strip panel I'm missing on your car with the interim bumper. I've just been sent your email address, will try on that.
- James Davies
- 356Talk Moderator
- Posts: 2951
- Joined: Thu Aug 15, 2013 9:15 am
- Location: Heidelberg, DE
Re: 1952 Coupe Restoration
Tony, your split-window export bumper mounting points on the side of the battery box looks almost identical to Scott's bent-window ones. That's pretty good evidence that Scott is on the right track. Very cool, and good detective work Scott!
Of course Scott's brackets that go from the battery box to the fenders are the 1952-53 variety, which have the vertical horn mount on them and diagonal bracket attaching behind, to allow for a larger, louder HO/FSA type horn with 8 perimeter screws. The split-window horns were mounted in alcoves on the front of the battery box. There was only space in those alcoves for the smaller, HO/FDF variety (6 perimeter screws).
Of course Scott's brackets that go from the battery box to the fenders are the 1952-53 variety, which have the vertical horn mount on them and diagonal bracket attaching behind, to allow for a larger, louder HO/FSA type horn with 8 perimeter screws. The split-window horns were mounted in alcoves on the front of the battery box. There was only space in those alcoves for the smaller, HO/FDF variety (6 perimeter screws).
- Spencer Harris
- 356 Fan
- Posts: 1149
- Joined: Thu Mar 27, 2008 12:39 pm
- Location: San Joaquin Valley, California
Re: 1952 Coupe Restoration
Detail of the 52/53 fender brace/horn bracket configuration James describes. These photos & sketch from #60238 mfg. date 08/17/53 - European delivery. When I found my car it was fitted with a single (driver's side) 6-screw HO/FDF. The '53 parts manual lists 356.62.030 as Bosch signal horn with bracket and 356.62.033 as Bosch extra loud horn. The '55 parts manual lists the same part numbers as Horn Bosch (normal) and Horn Bosch (road). I suspect the 6-screw HO/FDFs were standard for Euro cars and the louder HO/FSA horns were preferred for US delivery cars, or perhaps the road horn was an option in either market.James Davies wrote:Scott's brackets that go from the battery box to the fenders are the 1952-53 variety, which have the vertical horn mount on them and diagonal bracket attaching behind, to allow for a larger, louder HO/FSA type horn with 8 perimeter screws. The split-window horns were mounted in alcoves on the front of the battery box. There was only space in those alcoves for the smaller, HO/FDF variety (6 perimeter screws).
-
- 356 Fan
- Posts: 66
- Joined: Mon Jan 26, 2015 12:09 am
- Location: Sydney, Australia
Re: 1952 Coupe Restoration
Excellent information, thanks all. Good to know they're the original bumper brackets.
The horn I have is this one, I'm not sure if it's original. Unfortunately it's the only photo I have of it, and it's currently 800km away so I don't have any more detail.
The horn I have is this one, I'm not sure if it's original. Unfortunately it's the only photo I have of it, and it's currently 800km away so I don't have any more detail.
- Spencer Harris
- 356 Fan
- Posts: 1149
- Joined: Thu Mar 27, 2008 12:39 pm
- Location: San Joaquin Valley, California
Re: 1952 Coupe Restoration
I'm going to defer to James on that one Scott. He's done much more research on pre-As than I. My comments about the normal horn and the road horn are simply theory, and since the smaller 6-screw horn was on my car when I found it I'll likely clean it up and reinstall it. The 8-screw HO/FSA that James referenced looks like this. They're the size of a dinner plate and about 5 lbs.Scott Nowell wrote:The horn I have is this one, I'm not sure if it's original.
Spencer Harris
San Joaquin Valley, CA.
San Joaquin Valley, CA.
-
- 356 Fan
- Posts: 66
- Joined: Mon Jan 26, 2015 12:09 am
- Location: Sydney, Australia
Re: 1952 Coupe Restoration
I'm going to have to research the horn Spencer, it's an 8-screw which seems to be correct but it's been repainted or is a repro. Will have to check when I get the rest of the parts down to Sydney. Interesting to note there was both 'normal' and 'loud'. The earlier horns I have heard wouldn't startle a nervous man with his head under the bonnet.
I get the feeling there's not much about Pre-A Porsches that Jim doesn't know! Very handy for the rest of us.
I get the feeling there's not much about Pre-A Porsches that Jim doesn't know! Very handy for the rest of us.
- James Davies
- 356Talk Moderator
- Posts: 2951
- Joined: Thu Aug 15, 2013 9:15 am
- Location: Heidelberg, DE
Re: 1952 Coupe Restoration
Thanks Spencer!
Here's drawings of the available horns in 1952 from the 1952 Bosch parts book.
The black ones without the grills are meant to be behind bodywork. The chrome ones with grills are meant to be mounted on the bumper, which one sees from period rally photos of Porsches. Later on, all the Bosch horns had grills, both black and chrome.
Porsches in 1950 through '53 came with either the HO/FDF 6/3 (and 6/4 if 2 horns), which is the 6 perimeter screw model, or the the larger and louder HO/FSA 6/4 (and 6/3 if dual horn) which is the 8 perimeter screw model in 1952-53. Here's a photo of a 1952 HO/FSA 6/4.
Horns were easily broken due to their location, so they were often replaced during the lifetime of the car. Bosch horns are date stamped on the back rim, but sometimes due to corrosion or lousy stamping, this is not readable. You can see "4H" stamped on the one above. That's April 1952.
In 1952, your car could have come with either one or two horns, and any combination of normal or loud. If it came with one of the large, loud (starkhorn) HO/FSA ones, it would have likely been the 6/4 one. If it came with 2, then that might be listed on the Kardex, and the car would also have a Bosch horn relay SH/SE 11/1 shown in the drawing and photo below, with the appropriate wiring.
Sometimes cars came with one loud and one regular, with a switch between them - country horn and city horn. Again, your car would have the relay and a toggle switch if this was the case, and it could be deduced from the wiring perhaps.
Hope this helps! Sorry for the sidetrack on horns, but I don't think any of these diagrams had been posted here before.
Here's drawings of the available horns in 1952 from the 1952 Bosch parts book.
The black ones without the grills are meant to be behind bodywork. The chrome ones with grills are meant to be mounted on the bumper, which one sees from period rally photos of Porsches. Later on, all the Bosch horns had grills, both black and chrome.
Porsches in 1950 through '53 came with either the HO/FDF 6/3 (and 6/4 if 2 horns), which is the 6 perimeter screw model, or the the larger and louder HO/FSA 6/4 (and 6/3 if dual horn) which is the 8 perimeter screw model in 1952-53. Here's a photo of a 1952 HO/FSA 6/4.
Horns were easily broken due to their location, so they were often replaced during the lifetime of the car. Bosch horns are date stamped on the back rim, but sometimes due to corrosion or lousy stamping, this is not readable. You can see "4H" stamped on the one above. That's April 1952.
In 1952, your car could have come with either one or two horns, and any combination of normal or loud. If it came with one of the large, loud (starkhorn) HO/FSA ones, it would have likely been the 6/4 one. If it came with 2, then that might be listed on the Kardex, and the car would also have a Bosch horn relay SH/SE 11/1 shown in the drawing and photo below, with the appropriate wiring.
Sometimes cars came with one loud and one regular, with a switch between them - country horn and city horn. Again, your car would have the relay and a toggle switch if this was the case, and it could be deduced from the wiring perhaps.
Hope this helps! Sorry for the sidetrack on horns, but I don't think any of these diagrams had been posted here before.
-
- 356 Fan
- Posts: 4
- Joined: Tue Dec 16, 2014 2:31 pm
- Spencer Harris
- 356 Fan
- Posts: 1149
- Joined: Thu Mar 27, 2008 12:39 pm
- Location: San Joaquin Valley, California
Re: 1952 Coupe Restoration
Another great project. In a chicken barn for 30-years? Tell us the rest of the story please!Claudio Rimediotti wrote:I have 11487
Congratulations on the find Claudio!
Spencer Harris
San Joaquin Valley, CA.
San Joaquin Valley, CA.
-
- 356 Fan
- Posts: 4
- Joined: Tue Dec 16, 2014 2:31 pm
Re: 1952 Coupe Restoration
Thank you
Yes in a chicken barn in Arizona for around 30 years, see first photo.
Last american owner was Ibrahim Kuzu well know in 356 world.
I have it from 2005 but in same conditions...
I hope One day to start restoration...
Yes in a chicken barn in Arizona for around 30 years, see first photo.
Last american owner was Ibrahim Kuzu well know in 356 world.
I have it from 2005 but in same conditions...
I hope One day to start restoration...