Bill Doyle`s shop ca. 1989

Discussion of 4-Cam Type 547 engines (and all the Fuhrmann racing variants) and cars that powered them.
Post Reply
Message
Author
User avatar
bil brown
356 Fan
Posts: 965
Joined: Thu Mar 27, 2008 12:36 pm
Location: Lincoln, NE

Bill Doyle`s shop ca. 1989

#1 Post by bil brown » Mon Jun 28, 2021 8:43 pm

I had sent my 692 3/A out to Bill when he was still in Fresno for a freshen-up since I had sold it. We towed the car out a couple months later, spent a day installing the engine and test driving. I took this "spy" pic of his schedule board......check out some of those names/cars It was a long wait for an engine rebuild. I miss Bill.....last saw him at a Rennsport event. One memorable trip was to Road America with 4 Spyders....ALL from Nebraska.......Baker`s 550 & RS60, Bob Edwards` 550A and my buddy Lynn Larson`s 550.......we partied hard!.....my favorite track in the country!
Attachments
35EF998B-4291-4E7D-9C26-7C1401396A2C.jpeg
35EF998B-4291-4E7D-9C26-7C1401396A2C.jpeg (2.38 MiB) Viewed 1454 times
Bill Brown

User avatar
Sebastian Gaeta
356 Fan
Posts: 2824
Joined: Tue Mar 25, 2008 5:50 pm
Location: Ann Arbor, MI

Re: Bill Doyle`s shop ca. 1989

#2 Post by Sebastian Gaeta » Tue Jun 29, 2021 7:47 am

Nice picture Bill!

I see my friend Roger Meiner's name on that board, a Michigander, for his since sold Spyder.
Sebastian Gaeta
www.arbormotion.com

Registry #8339

'65 C coupe
'64 C cab

-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle

Richard Emerson
356 Fan
Posts: 772
Joined: Wed Jan 29, 2014 1:43 am

Re: Bill Doyle`s shop ca. 1989

#3 Post by Richard Emerson » Tue Jun 29, 2021 3:29 pm

That’s a lot of engines he must have worked on!
It’s amazing too how well known he was; I knew his name and that he was the expert even when a 4cam was just a dream.

Rusty Ferrell
356 Fan
Posts: 449
Joined: Wed Mar 26, 2008 4:47 pm
Location: Virginia Beach,VA

Re: Bill Doyle`s shop ca. 1989

#4 Post by Rusty Ferrell » Fri Jul 09, 2021 11:18 am

4Cam guys are definitely left with a huge void. I met him when he was working with Wellington, he was much more open than Jim. Helped me on numerous occasions with bits I needed.
We all miss him and wish his family and friends the best that is out there.
Rusty

Post Reply