Page 1 of 1
Need Carrera 2 crank case breather brackets dimensions
Posted: Sat Jun 26, 2021 5:24 pm
by Ibrahim Kuzu
Need Carrera 2 crankcase breather brackets shape and dimensions to weld on the engine wall
If any one making them ,I will purchase .Need location dimensions on the wall .
Appreciate the help.
Thank you
IK
4 cam cooling
Re: Need Carrera 2 crank case breather brackets dimensions
Posted: Sun Jun 27, 2021 11:45 am
by Scott Schneider
Ibrahim,
Contact me and I will send an original out to you to copy if you would like.
Scott Schneider
Re: Need Carrera 2 crank case breather brackets dimensions
Posted: Sun Jun 27, 2021 1:57 pm
by Joris Koning
Ibrahim,
Are you after the breather or details of the bracket that holds the breather? The brackets on the C2s are different from those of the 692 cars as they used much thicker sound deadening in the engine compartment.
FWIW, Mike Smith makes a very nice and very reasonable priced reproduction of the breather.
Re: Need Carrera 2 crank case breather brackets dimensions
Posted: Sun Jun 27, 2021 2:36 pm
by Ibrahim Kuzu
Thank you Scott.
Sorry for the confusion We are after dimensions of the brackets not breather canister.
Joris,
Thank you for the note...Yes breather canister brackets .Need to fabricate the brackets to install them on the firewall ,Location and bracket depth dimension etc.
IK