Page 1 of 1
Weber Carb intake Cooler
Posted: Mon Apr 05, 2021 8:59 am
by Neil Bardsley
https://youtu.be/lAcYahc74o8
There is a glimpse of them in this clip and a mention as a special order item? I've never heard of them before. Any more information?
Re: Weber Carb intake Cooler
Posted: Thu Apr 15, 2021 7:29 pm
by Jeff Adams
The car in the video is a 59 1600GS with a 692/2 engine. The clamshell piece bolted to the side of each air cleaner is part of the carburetor heating system to prevent icing. Similar to the automatically controlled setup on a US spec pushrod engine with the temperature sensitive bellows behind the fan shroud. The system on a Carrera is manual. A hand controlled lever on each side opens and closes an air valve to direct warm air through a corrugated hose to the clamshell collector. This engine has Solex carbs, not Webers.
Re: Weber Carb intake Cooler
Posted: Thu Apr 15, 2021 11:10 pm
by Craig Richter
Jim Crackery
Re: Weber Carb intake Cooler
Posted: Fri Apr 16, 2021 12:31 am
by Greg Bryan
Here's the part
Re: Weber Carb intake Cooler
Posted: Sat May 01, 2021 3:00 am
by Neil Bardsley
Thank you for responses