Carrera Casted Cooling Fans, Now Available.

Discussion of 4-Cam Type 547 engines (and all the Fuhrmann racing variants) and cars that powered them.
Post Reply
Message
Author
User avatar
Ibrahim Kuzu
356 Fan
Posts: 762
Joined: Wed Mar 26, 2008 8:15 am

Carrera Casted Cooling Fans, Now Available.

#1 Post by Ibrahim Kuzu » Sat Aug 27, 2022 2:33 pm

Not for Concourse Engines ,
For Racers, now we are Casting 3D print Carrera 2 liter or 1500/1600 cc Engine Fans
Engineering analysis done at 20,000rpm.Fan blades are 2mm thick and 2 liter fan one Lb. lighter than original manufactured one.
And 1500/1600 cc one very close to original factory weight.
If Interested, Please call or email Bob Garretson.
4 Cam Cooling
Attachments
Carrera Casted Fans -4.jpg
Carrera Casted Fans -3.jpg
Carrera Casted Fans -2.jpg
carrera Casted Fans -1.jpg

DaveErickson
356 Fan
Posts: 1353
Joined: Sat Oct 26, 2013 9:34 pm
Location: Monterey, CA

Re: Carrera Casted Cooling Fans, Now Available.

#2 Post by DaveErickson » Mon Aug 29, 2022 11:54 pm

Ibrahim Kuzu wrote:
Sat Aug 27, 2022 2:33 pm
now we are Casting 3D print Carrera 2 liter or 1500/1600 cc Engine Fans
Hi Ibrahim, just interested in the process. Is the fan generated by 3D print used to make sand castings, or what?

User avatar
Ibrahim Kuzu
356 Fan
Posts: 762
Joined: Wed Mar 26, 2008 8:15 am

Re: Carrera Casted Cooling Fans, Now Available.

#3 Post by Ibrahim Kuzu » Tue Aug 30, 2022 10:50 am

Hi Dave,
It is a 3D sand print ,than material Poured in ...One pattern one part ..If you do bad pouring (material temperature, Weather temperature, how fast you are going etc) all have effect on the end result...Our yield is around 4/1 meaning 4 good pour one bad one goes back to fire...
Due to very critical special part. ( Casting 2mm fan blades not every ones cake to eat....) .Than We machine the needed surfaces to the factory specs.

User avatar
Joris Koning
356 Fan
Posts: 2455
Joined: Tue Mar 25, 2008 5:34 pm

Re: Carrera Casted Cooling Fans, Now Available.

#4 Post by Joris Koning » Tue Aug 30, 2022 10:56 am

Very cool Ibrahim, thanks for sharing!
'56 Coupe
'57 Coupe
'59 Cab 
'60 Coupe

User avatar
Ibrahim Kuzu
356 Fan
Posts: 762
Joined: Wed Mar 26, 2008 8:15 am

Re: Carrera Casted Cooling Fans, Now Available.

#5 Post by Ibrahim Kuzu » Tue Aug 30, 2022 11:19 am

Thank you Joris,
Happy to be in the crowd of the special guys like, Mike Smith,Bob Garretson,Jacques Lefriant and others taking their time to make these non-existing Carrera parts
to keep the 356 Carrera faith going .

User avatar
Martin Benade
356 Fan
Posts: 9126
Joined: Wed Nov 23, 2011 10:52 am
Location: Cleveland, Ohio

Re: Carrera Casted Cooling Fans, Now Available.

#6 Post by Martin Benade » Tue Aug 30, 2022 11:21 am

It’s lost wax casting? Your rejection rate sounds good to me.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna

User avatar
Ibrahim Kuzu
356 Fan
Posts: 762
Joined: Wed Mar 26, 2008 8:15 am

Re: Carrera Casted Cooling Fans, Now Available.

#7 Post by Ibrahim Kuzu » Tue Aug 30, 2022 11:32 am

Hi Martin ,
Not wax casting.3D sand print Core Pattern .Wax casting also can be used in the choice ..But ours is Sand Print cores .

Jim Wayman
356 Fan
Posts: 311
Joined: Sun Mar 29, 2009 5:48 pm
Location: Fallbrook, California
Contact:

Re: Carrera Casted Cooling Fans, Now Available.

#8 Post by Jim Wayman » Sat Sep 17, 2022 9:14 pm

There is a 3D print material that is a plastic, but behaves like wax when hot metal is poured into the mold. Is that what you are using Ibrahim?
Jim Wayman

User avatar
Ibrahim Kuzu
356 Fan
Posts: 762
Joined: Wed Mar 26, 2008 8:15 am

Re: Carrera Casted Cooling Fans, Now Available.

#9 Post by Ibrahim Kuzu » Tue Sep 20, 2022 11:31 am

Hi Jim,
We are not using Plastic.
It is Sand Core.
Please call me if you need more details.
IK

Jim Wayman
356 Fan
Posts: 311
Joined: Sun Mar 29, 2009 5:48 pm
Location: Fallbrook, California
Contact:

Re: Carrera Casted Cooling Fans, Now Available.

#10 Post by Jim Wayman » Tue Sep 20, 2022 12:09 pm

Ibrahim

Maybe I wasn't clear. There is a material that you 3D print that is plastic. It is then placed in a sand cast mold, the metal is poured into the mold and the 3D printed plastic part melts just like wax would.
Jim Wayman

User avatar
Martin Benade
356 Fan
Posts: 9126
Joined: Wed Nov 23, 2011 10:52 am
Location: Cleveland, Ohio

Re: Carrera Casted Cooling Fans, Now Available.

#11 Post by Martin Benade » Tue Sep 20, 2022 1:47 pm

That is essentially a lost wax method, but this is quite different. Apparently the sand is printed into a mold shape leaving a very accurate cavity to pour the aluminum into. It’s one of those modern technologies that sounds nearly impossible but it works and is used commercially.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna

User avatar
Ibrahim Kuzu
356 Fan
Posts: 762
Joined: Wed Mar 26, 2008 8:15 am

Re: Carrera Casted Cooling Fans, Now Available.

#12 Post by Ibrahim Kuzu » Wed Sep 21, 2022 1:14 pm

Hi Jim,
Just like Martin explained.
Thanks Martin...
IK

User avatar
Martin Benade
356 Fan
Posts: 9126
Joined: Wed Nov 23, 2011 10:52 am
Location: Cleveland, Ohio

Re: Carrera Casted Cooling Fans, Now Available.

#13 Post by Martin Benade » Wed Sep 21, 2022 1:42 pm

I’m an expert now after reading various things from Google.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna

DaveErickson
356 Fan
Posts: 1353
Joined: Sat Oct 26, 2013 9:34 pm
Location: Monterey, CA

Re: Carrera Casted Cooling Fans, Now Available.

#14 Post by DaveErickson » Thu Sep 22, 2022 11:43 pm

Ibrahim, one point of clarification: does the 3d printing produce the pattern, which then is used to make the mold, and removed? Or does the 3d printing generate the mold directly? If the latter, then I think that implies the 3d printer is generating each grain of sand and it is also generating the binder to hold the grains together... Is the sand traditional silica sand or something else? Any way you look at it its pretty remarkable.

User avatar
PaulLima
356 Fan
Posts: 457
Joined: Fri Jan 10, 2014 2:02 pm
Location: Gardnerville, NV

Re: Carrera Casted Cooling Fans, Now Available.

#15 Post by PaulLima » Fri Sep 23, 2022 9:08 am

I found this, which might help explain the process: https://www.humtown.com/3d-printed-sand-cores-molds

Post Reply