Hot Hub 51 Cabriolet

For Pre A discussions and questions
Post Reply
Message
Author
Mark James Ready
356 Fan
Posts: 51
Joined: Mon Feb 04, 2019 9:16 pm
Tag: Mark
Location: Australia

Hot Hub 51 Cabriolet

#1 Post by Mark James Ready »

Just replaced rear hub seals , leaky oily wheels. Found no large O ring behind square flange. Large O rings fitted. Unable to remove spacer over wheel bearing right wheel . Could not fit smaller O ring. Leak still fixed both wheels. Now right rear wheel very hot. Wheel off and drum, ' fry an egg' hot. Wheel rolling OK. Brake pads seem clear. Braking fine during drive.
Any clues. Wheel bearings have been replaced recently.
Mark

Post Reply