How to retrofit turn signal to self-cancel?
- Tom Coughlin
- 356 Fan
- Posts: 1183
- Joined: Wed Mar 26, 2008 9:32 am
- Tag: Go Gators
- Location: SW Boston
How to retrofit turn signal to self-cancel?
Has anybody retrofitted an A cancel ring to a Pre-A?
KTF, member #15
- Albert Haefner
- 356 Fan
- Posts: 121
- Joined: Fri Aug 20, 2010 9:10 am
- Location: sw Germany
- Contact:
- Albert Haefner
- 356 Fan
- Posts: 121
- Joined: Fri Aug 20, 2010 9:10 am
- Location: sw Germany
- Contact:
- Tom Coughlin
- 356 Fan
- Posts: 1183
- Joined: Wed Mar 26, 2008 9:32 am
- Tag: Go Gators
- Location: SW Boston
Re: How to retrofit turn signal to self-cancel?
Albert: I agree-the turn signal was made to blink because it does not have a self-cancel ability. That's exactly how mine operates. I want to find out if there is a way to change mine to make it self cancel.
KTF, member #15
-
- 356 Fan
- Posts: 410
- Joined: Mon Apr 13, 2020 2:42 pm
- Tag: 356 owner
- Location: Yountville, CA
Re: How to retrofit turn signal to self-cancel?
surprised someone hasn't made a retrofit one--after market item.
1963 T6 couple #212891, motor #*KD*P*730464
- Albert Haefner
- 356 Fan
- Posts: 121
- Joined: Fri Aug 20, 2010 9:10 am
- Location: sw Germany
- Contact:
Re: How to retrofit turn signal to self-cancel?
Just drive your PreA straight along. No turns.
Or buy an “A”
Or buy a little beeper for 2$$ and install it behind the dash as I did in my and most of our customers cars.
So you don’t forget your blinker and keep on driving a pre A
Al🥴
Or buy an “A”
Or buy a little beeper for 2$$ and install it behind the dash as I did in my and most of our customers cars.
So you don’t forget your blinker and keep on driving a pre A
Al🥴
-
- 356 Fan
- Posts: 89
- Joined: Wed Mar 26, 2008 12:51 am
- Tag: Kailua, Hawaii
- Location: Kailua, Hawaii
Re: How to retrofit turn signal to self-cancel?
My 55 Speedster came with an A turn signal. I have a correct Pre A one that I'm thinking of installing but face the opposite dilemma I made the cancelation work for the A tun signal switch by adding the cancelation ring to the steering wheel and like the function of it and now I don't feel it is worth going back to a no cancelation switch. But having the little light on the tip might also be kind of cool.
So yes it is doable but not with the Pre-A switch. That I know of
Rick
So yes it is doable but not with the Pre-A switch. That I know of
Rick
-
- 356 Fan
- Posts: 89
- Joined: Wed Mar 26, 2008 12:51 am
- Tag: Kailua, Hawaii
- Location: Kailua, Hawaii
Re: How to retrofit turn signal to self-cancel?
Albert I would be interested in the location of that $2 beeper on the turn signal. Even my A cars don't always cancel and a little noise might be beneficial. Any recommend buzzer would be beneficial especial for us hard of hearing guys
Rick
Rick
- Albert Haefner
- 356 Fan
- Posts: 121
- Joined: Fri Aug 20, 2010 9:10 am
- Location: sw Germany
- Contact:
Re: How to retrofit turn signal to self-cancel?
Beeper is small like a piece of sugar. Just put it close to the blinker relais. must not be visible. Hidden somewhere behind the dash.
Take a 6Volt version. And whenever too loud (noisy) just put spme scotch tape or similar on the outlet hole.
Take a 6Volt version. And whenever too loud (noisy) just put spme scotch tape or similar on the outlet hole.
- Tom Coughlin
- 356 Fan
- Posts: 1183
- Joined: Wed Mar 26, 2008 9:32 am
- Tag: Go Gators
- Location: SW Boston
Re: How to retrofit turn signal to self-cancel?
Albert: Great idea. I just Googled "6 volt turn signal buzzer" and came up with many for sale.
KTF, member #15
- Jules Dielen
- 356 Fan
- Posts: 3206
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: How to retrofit turn signal to self-cancel?
There is also the 6v flasher relay option with an integrated beeper. If plugs right into the flasher socket a d the noise is hard to miss. No wires to run!
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.
- Jules Dielen
- 356 Fan
- Posts: 3206
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: How to retrofit turn signal to self-cancel?
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.
- Albert Haefner
- 356 Fan
- Posts: 121
- Joined: Fri Aug 20, 2010 9:10 am
- Location: sw Germany
- Contact:
Re: How to retrofit turn signal to self-cancel?
A Good Solution too. But some PreA people prefer to flash with a fifties original bimetallic flasher