I just received and installed a reproduction B/C stock "plastic" steering wheel from ClassicoWheels.com It is an EXCELLENT reproduction. When I set the old original side-by-side with the reproduction, I can't tell any difference. Except of course that the new one isn't all beat up from 55 years of use.
I recommend this product if you need a replacement "factory" steering wheel
Gary James
'64 SC
#217121
Reproduction B/C steering wheel
-
- 356 Fan
- Posts: 18
- Joined: Fri Apr 18, 2008 8:01 pm
- Location: Dallas/Ft Worth area
- Contact:
Reproduction B/C steering wheel
'64 SC Coupe #217121
- Bil Brown
- 356 Fan
- Posts: 907
- Joined: Thu Mar 27, 2008 12:36 pm
- Location: Lincoln, NE
Re: Reproduction B/C steering wheel
How about a close-up pic of the spokes of both original and repro wheel?
Bill Brown
- Richard Holler
- 356 Fan
- Posts: 101
- Joined: Sat Aug 04, 2018 2:04 pm
- Tag: 1963 356 S T6 coupe
- Location: Chicago, Illinois
Re: Reproduction B/C steering wheel
any pics? thinking of switching back to a stock wheel.
1963 356 S T6 Karmann Coupe (stock engine)
Front disc brake conversion
GDP Dual Exhaust
Momo Classic steering wheel
SMD headlights
CUlayer LED rear tails
Superleicht spec (aka missing V brace and copious amounts of Bondo)
Front disc brake conversion
GDP Dual Exhaust
Momo Classic steering wheel
SMD headlights
CUlayer LED rear tails
Superleicht spec (aka missing V brace and copious amounts of Bondo)
-
- 356 Fan
- Posts: 18
- Joined: Fri Apr 18, 2008 8:01 pm
- Location: Dallas/Ft Worth area
- Contact:
- Ken Lubke
- 356 Fan
- Posts: 290
- Joined: Fri Nov 21, 2008 1:40 pm
- Location: west mpls
Re: Reproduction B/C steering wheel
Anybody have picture diagram of the sequence of parts in putting a vdm wheel with horn button on so it works?.
I am replacing my Nardi wheel with stock one. Pictures would be very helpful
Thanks
I am replacing my Nardi wheel with stock one. Pictures would be very helpful
Thanks
- Ken Lubke
- 356 Fan
- Posts: 290
- Joined: Fri Nov 21, 2008 1:40 pm
- Location: west mpls
Re: Reproduction B/C steering wheel
Anybody have picture diagram of the sequence of parts in putting a vdm wheel with horn button on so it works?.
I am replacing my Nardi wheel with stock one. Pictures would be very helpful
Thanks
I am replacing my Nardi wheel with stock one. Pictures would be very helpful
Thanks
- Ken Lubke
- 356 Fan
- Posts: 290
- Joined: Fri Nov 21, 2008 1:40 pm
- Location: west mpls
Re: Reproduction B/C steering wheel
I did all my research and a lot of discreet shopping and ended up with this wheel.
Left all the patina on just a light sand and paint/clear.
A little bit different then Nardi that I had ,but I really like the original look.
Left all the patina on just a light sand and paint/clear.
A little bit different then Nardi that I had ,but I really like the original look.
- Attachments
-
- 1D544FFC-13DF-471D-9C71-E4A41C630BAC.jpeg (592.48 KiB) Viewed 1350 times
-
- 637CCE3C-7E80-4814-8D36-0472BF3E2DAA.jpeg (1.03 MiB) Viewed 1350 times