Length of accelerator pull rod

[Rafik Dous]

On a '61 T5, is the length of the rod 1650mm?
Thanks in advance

[Mike Wilson]

PRS 356 shows it as 1650mm for the 356 and 356A. Not sure about the T-5 or T-6. I'll check the parts manuals.

Update: B parts manual: 695.423.014.00. No length indicated.
A parts manual: 356.23.019. No length indicated.
C parts manual: no changes indiczted from the B's.

The info might be found by Googling the topic.

Mike

[Rafik Dous]

Thanks Mike

[Brad Ripley]

Here are the lengths of those rods, end to end without ball sockets. http://www.nlaparts.com/store/advanced_ ... 01&x=0&y=0

[Rafik Dous]

Brad I am referring to the rod that goes through the tunnel

[Brad Ripley]

Rod down the tunnel:
356A 1650 mm NLA 23 019 see http://www.nlaparts.com/store/pull-tunn ... tpkilculu4
B/C 1535 mm 695 423 014 00 http://www.nlaparts.com/store/pull-tunn ... 23037.html
Both rods in stock. BTW, all linkage rods, ball sockets, etc, from pedal to carbs, are available from stock.