Original vs repro hubcap bt6
- Joost van der Velden
- 356 Fan
- Posts: 219
- Joined: Wed Mar 26, 2008 4:07 pm
- Location: The Netherlands
Original vs repro hubcap bt6
I have a set of hubcaps of which i presume the one on the left in the picture is original and the right one is a repro. The one on the left has a sticker made in Germany on the inside.
- Attachments
-
- 841F2012-194F-4874-9B83-24F72CE3B7A3.jpeg (2.38 MiB) Viewed 1321 times
-
- 6DBC32C5-482C-4671-A5C1-E5F65954709C.jpeg (2.58 MiB) Viewed 1321 times
Porsche 356 BT6 S90 1962
VW Beetle 1302S 1971
Porsche 911 SC 1980
VW Beetle 1302S 1971
Porsche 911 SC 1980
- Martin Benade
- 356 Fan
- Posts: 12348
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: Original vs repro hubcap bt6
My Stoddard repros from maybe 4 years ago are nice but the emblems sit raised 2mm from the chrome due to the shape of the emblem mounting studs. I have fixed one of them by carefully denting the cap behind the emblem for clearance. I think I saw that Stoddard has “new improved” Super hubcaps now, maybe they fixed that.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
-
- 356 Fan
- Posts: 4184
- Joined: Sun Apr 20, 2008 12:54 am
Re: Original vs repro hubcap bt6
There were some aftermarket hubcaps which didn't have an inside taper to properly fit the rim's recess next to the clips
and had a slight habit of NOT fitting the rim flatly and falling off! Don't ask how I know.
and had a slight habit of NOT fitting the rim flatly and falling off! Don't ask how I know.
- Jim Breazeale
- Classifieds Monitor
- Posts: 2804
- Joined: Thu Mar 27, 2008 8:07 pm
- Tag: SF Giants Fan
- Location: SF Bay Area
- Contact:
Re: Original vs repro hubcap bt6
All original A/B hubcaps have date stamps on them.
Jim Breazeale
www.easypor.com
www.facebook.com/pages/European-Auto-Salvage-Yard-EASY/120458108029410
www.easypor.com
www.facebook.com/pages/European-Auto-Salvage-Yard-EASY/120458108029410
- Robert Reed
- 356 Fan
- Posts: 309
- Joined: Thu Dec 08, 2011 3:18 pm
- Location: Lascassas, TN
Re: Original vs repro hubcap bt6
Jim, could you please expound on the location of the date stamps as they pertain to the Super hubcaps?
Thanks, Bob
Thanks, Bob
- Mike Wilson
- Classifieds Monitor
- Posts: 11622
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Original vs repro hubcap bt6
On the Super hubcaps, the date stamp should be on the outside lip.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Robert Reed
- 356 Fan
- Posts: 309
- Joined: Thu Dec 08, 2011 3:18 pm
- Location: Lascassas, TN
Re: Original vs repro hubcap bt6
Mike, thanks for the information, although I have looked at 2 of my hubcaps and don’t see any date stamps.
I bought the car in 1978, and I thought that they were original to the car.
Hmmm, they look original...
Bob
I bought the car in 1978, and I thought that they were original to the car.
Hmmm, they look original...
Bob
- Mike Wilson
- Classifieds Monitor
- Posts: 11622
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Original vs repro hubcap bt6
I'm not sure when they quit stamping them. I have to check mine. If I recall, originals are stamped "Lemmerz" and a date.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Robert Reed
- 356 Fan
- Posts: 309
- Joined: Thu Dec 08, 2011 3:18 pm
- Location: Lascassas, TN
Re: Original vs repro hubcap bt6
Mike, I should have mentioned that my car is an early ‘62, I suppose. I didn’t realize that there was a cut off date for such. May be why I couldn’t find it...
Bob
Bob
- Walt Nolte
- 356 Fan
- Posts: 205
- Joined: Sat Apr 26, 2008 5:41 pm
- Location: Mountain States
Re: Original vs repro hubcap bt6
I bought a set from the local Porsche dealership in 1997. No date stamp.
Walt Nolte
59 A Coupe
Montana
Walt Nolte
59 A Coupe
Montana
walt nolte
- Jim Breazeale
- Classifieds Monitor
- Posts: 2804
- Joined: Thu Mar 27, 2008 8:07 pm
- Tag: SF Giants Fan
- Location: SF Bay Area
- Contact:
Re: Original vs repro hubcap bt6
The date stamp would be on the inside lip very near one of the set of holes for th hub cap puller. They can be very hard to see. You may have to clean the cap with some 000 steel wool. They also have a Lemmerz logo on them. I cant find an original hubcap to take some pictures. There have been repop hubcaps since the mid 70s. I have a set of those on my 62 Cab that I have owned since 1978Regards
Jim
Jim
Jim Breazeale
www.easypor.com
www.facebook.com/pages/European-Auto-Salvage-Yard-EASY/120458108029410
www.easypor.com
www.facebook.com/pages/European-Auto-Salvage-Yard-EASY/120458108029410
- Robert Reed
- 356 Fan
- Posts: 309
- Joined: Thu Dec 08, 2011 3:18 pm
- Location: Lascassas, TN
Re: Original vs repro hubcap bt6
Thanks Jim; I’ll take some bronze wool to them. I have had much success with the bronze, not nearly as “ambitious” , ie, harmful.
Bob
Bob
- Mike Wilson
- Classifieds Monitor
- Posts: 11622
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Original vs repro hubcap bt6
I checked mine which were supposed to be original. When I had them rechromed, maybe the stampings got buffed off. I have a few more stashed I can check.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Thomas Tuccillo
- 356 Fan
- Posts: 90
- Joined: Tue Sep 22, 2015 11:07 am
- Location: NY
Re: Original vs repro hubcap bt6
does the ';MADE IN WESTERN GERMANY'' paper tag have any reality significance or just a deceptive touch. my set of supers that were on my 59 cab 31yrs. ago has those tags. thx tom
- Mike Wilson
- Classifieds Monitor
- Posts: 11622
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Original vs repro hubcap bt6
Good question, Tom. If you check out the pics of my hubcaps on the next thread, one has a sticker "Made in Germany". I suspect it is a repro made after the unification.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe