Are the levers (I thought they were linkages, but the parts book calls them levers), originally painted or plated? Number 10 and 15 in the attached image.
I swear I had read that the long one (10) was painted black and the smaller (15) to match the shroud (silver on S90), but it's not looking consistent with the photos of rebuilt S90 engines I'm finding.
Thanks for clarifications and / or sources.
Levers Paint or Plate?
- Dennis Vogel
- 356 Fan
- Posts: 505
- Joined: Sat Oct 25, 2008 6:10 pm
- Location: Santa Rosa, CA
- Contact:
Levers Paint or Plate?
1960 356 S90 Sunroof Coupe
1970 914-6
2014 Carrera S
1970 914-6
2014 Carrera S
- Martin Benade
- 356 Fan
- Posts: 12392
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: Levers Paint or Plate?
Those were plated, I believe clear zinc is either correct or very similar to the original
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
-
- 356 Fan
- Posts: 350
- Joined: Tue Jul 14, 2009 4:01 pm
- Location: NYC, Amagansett, NY
Re: Levers Paint or Plate?
Never saw a painted set on any reasonably correct engine.
- Mike Wilson
- Classifieds Monitor
- Posts: 11637
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Levers Paint or Plate?
I had mine cad-plated but factory was most likely zinc.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Dan Kalinski
- 356 Fan
- Posts: 796
- Joined: Thu Mar 26, 2009 2:26 am
- Location: Pacific Northwest
Re: Levers Paint or Plate?
Plated. Believe this setup is a pretty good effort towards originality save for fan belt and coil... and of course, Ron’s full flow oil filter.
- Attachments
-
- EFE841C6-94B2-479F-8A0E-B86628A866A4.jpeg (1.4 MiB) Viewed 662 times
- Paul Hatfield
- 356 Registry Member
- Posts: 1149
- Joined: Tue Mar 25, 2008 5:46 pm
- Location: Washington State
- Contact:
Re: Levers Paint or Plate?
That is one pretty engine!
Paul Hatfield
"Miss April"
http://www.enginesinback.com
"Miss April"
http://www.enginesinback.com