356C e Brake cable attachment

[Greg Spreeman]

One of the previous owners was kind enough to disconnect all of the brake lines including the e brake cables. I have the e brake cables hanging loose coming from the cabin and pointing back towards the wheels, (rear e brakes, BTW). Do I just screw them back in? It can't be that easy, right?

On a related note, he also disconnected the actual brake lines. Seems that the lines are all there but, disconnected. My mind memory stopped functioning about 15 years ago and I didn't start with that much to begin with! Do I just reconnect the lines? Do I put any grease or anything on the fittings before screwing them together?

[David Jones]

No lube on the hydraulic brake lines.
As to the hand brake go to the manual, it is well covered. I assume you mean the outer cable and inner are exiting the chassis left and right of the trans. Hooking up the brake cable to the expander mechanism is a little fiddly and some pictures from someone who has one in the assembly stage would help.

[Doug McDonnell]

And thank PRS for remaking this piece that was no where to be found for years. https://www.stoddard.com/90135294110.html Not sure if Stoddard/NLA makes their own or gets it from PRS.

[Greg Spreeman]

So, I am guessing one of the previous owners thought these would work on the rear?