356C Upper Hood latch...where to buy
- Martin Benade
- 356 Fan
- Posts: 12181
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: 356C Upper Hood latch...where to buy
A T6 B
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
-
- 356 Fan
- Posts: 774
- Joined: Fri Mar 14, 2008 9:47 pm
- Location: South Orange NJ
Re: 356C Upper Hood latch...where to buy
I don't know that this car is bound for Amelia Island. If I can get a T6 B upper latch and it works, sounds like it saves me buying the correct part, having the old part cut out, weld in the new one and have a body guy get it prepped for paint.
Greg Spreeman
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
- Jim Liberty
- 356 Registry Member
- Posts: 4312
- Joined: Tue May 06, 2008 3:47 pm
- Tag: Jim
- Location: Orange Co., CA
- Contact:
Re: 356C Upper Hood latch...where to buy
Greg, I do not have that part, sorry. I thought you were referring to the locking hinge. Did you check with Adam Wright? .............Jim.
Jim Liberty
- Martin Benade
- 356 Fan
- Posts: 12181
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: 356C Upper Hood latch...where to buy
If you switched the upper latch then the lower one would not match it, the B lower (also like an A) is very different. Changing that would be even more work.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
-
- 356 Fan
- Posts: 774
- Joined: Fri Mar 14, 2008 9:47 pm
- Location: South Orange NJ
Re: 356C Upper Hood latch...where to buy
Martin, I am guessing you are talking metal work as opposed to just the receiver? I took a photo of the receiver that is currently installed. Also, it looks like some metal work was done around that little shelf that the receiver bolt in to.
Greg Spreeman
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
- Martin Benade
- 356 Fan
- Posts: 12181
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: 356C Upper Hood latch...where to buy
Yes the B version doesn’t even have a shelf at all. There is a 4” wide bracket welded in, a totally different system. That RD hood inner panel is the way to go. You might use the whole piece, or a portion of it.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
-
- 356 Fan
- Posts: 774
- Joined: Fri Mar 14, 2008 9:47 pm
- Location: South Orange NJ
Re: 356C Upper Hood latch...where to buy
I must be missing something here. It sounds like there was a hood produced years ago that fits the 356C but, the area where the latch attaches is not correct? The repro hood was made for the T6 B latch. So, anyone who bought the hood would have had to have modified the existing shelf area in their 355C as Martin described above or, would have had their newly purchased hood modified to accept the real 356C latch. This one makes no sense unless, it's part of a Monty Python skit.
Greg Spreeman
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
- Martin Benade
- 356 Fan
- Posts: 12181
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: 356C Upper Hood latch...where to buy
I think there may have been an adaptor plate to make one style into the other. Not sure which was the beginning type, or if I imagined this.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
- Doug McDonnell
- 356 Fan
- Posts: 6061
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: 356C Upper Hood latch...where to buy
Greg It is my understanding that at some point in the past the replacement hood was a C hood with a plate attached making it work for a T6B. The RD T6B hood currently sold may be that way still. With the plate removed it was a standard C hood. See Brad's #4 comment: viewtopic.php?f=1&t=33276&p=187334&hili ... +C#p187334
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
- Martin Benade
- 356 Fan
- Posts: 12181
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: 356C Upper Hood latch...where to buy
My B has a C hood with a B striker widened to fit. I bet you could make a C striker fit but you might need to cut off the finger plate. You’d have to pull the safety catch forward with one finger to release it.
Last edited by Martin Benade on Mon Jun 20, 2022 8:01 pm, edited 1 time in total.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
- Adam Wright
- Classifieds Monitor
- Posts: 10304
- Joined: Wed Mar 12, 2008 1:00 am
- Tag: KTF
Re: 356C Upper Hood latch...where to buy
This is what the repro NOS hood looked like, a welded plate to adapt.
www.unobtanium-inc.com
Check out my Barn Find column in the Registry magazine, always looking for good stories.
Check out my Barn Find column in the Registry magazine, always looking for good stories.
-
- 356 Fan
- Posts: 774
- Joined: Fri Mar 14, 2008 9:47 pm
- Location: South Orange NJ
Re: 356C Upper Hood latch...where to buy
Not to tempt the fates but, can the plate that was welded in just be removed? Angle grinder?
Greg Spreeman
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
- Adam Wright
- Classifieds Monitor
- Posts: 10304
- Joined: Wed Mar 12, 2008 1:00 am
- Tag: KTF
Re: 356C Upper Hood latch...where to buy
No, you can actually buy a tool to drill out spot welds.Greg Spreeman wrote: ↑Mon Jun 20, 2022 9:07 pm Not to tempt the fates but, can the plate that was welded in just be removed? Angle grinder?
https://www.eastwood.com/welders/spot-weld-cutters.html
www.unobtanium-inc.com
Check out my Barn Find column in the Registry magazine, always looking for good stories.
Check out my Barn Find column in the Registry magazine, always looking for good stories.
- Martin Benade
- 356 Fan
- Posts: 12181
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: 356C Upper Hood latch...where to buy
Either way can get it apart as long as you’re careful. You have to look very closely though to see if yours has that plate or if it’s just the wrong hood. When I bought my hood at the Stoddard swap meet twenty years ago I thought all T6 hoods were the same.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
-
- 356 Fan
- Posts: 774
- Joined: Fri Mar 14, 2008 9:47 pm
- Location: South Orange NJ
Re: 356C Upper Hood latch...where to buy
Thought I posted this before but, maybe I didn't hit the submit button. Got a closer look at the hood tonight and, it does have an impression. It's a little obscured due to one of the previous owners having applied generous amounts of bondo. So, tomorrow I'll pull the upper latch from my other C to see if it works. Restoration of these cars tends to give rise to new four letter words and when things work out, little happy dances in the garage that my wife doesn't understand. Not at the happy dance point but, it's feeling a lot better now that I got a better look tonight.
Greg Spreeman
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra
1965 356SC Coupe
1964 356C Coupe
2001 996 Cabriolet
Gone but not forgotten:
1970 914
1965 356C Sunroof Coupe
1989 911 Carerra