Luggage Rack Bolts
- Jim Clement
- 356 Fan
- Posts: 1471
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
Luggage Rack Bolts
Does any one know what the size and thread type is for the luggage rack bolts that secure the luggage rack to the engine lid ?
Mine are well painted over, and I need to run a tap through them, and I do not have the bolts.
and does anyone know what the length of them are ?
Mine are well painted over, and I need to run a tap through them, and I do not have the bolts.
and does anyone know what the length of them are ?
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
Re: Luggage Rack Bolts
The bolts are 8mmx1.25 but I'm unsure of the length. $26 American dollars seems kind of steep for 4 bolts - even Home Depot and Lowes carry metric hardware these days. If I had to guess, I'd say they're 60mm - there is a standoff tube as well and if you have those, it should be a pretty simple calculation to get the right length.
Greg Bryan
- Jim Clement
- 356 Fan
- Posts: 1471
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
Re: Luggage Rack Bolts
Thanks Greg - Yes I have the stand off hardware.. just measured, it is 55 mm plus the depth into the grill, so likely as you suggest at 60mm or if I could find 62.. 65 may stick past the bottom.
- Mike Wilson
- Classifieds Monitor
- Posts: 11622
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Luggage Rack Bolts
My notes indicate 8x70 mm, 1.25 pitch. 14mm ATF.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Jim Clement
- 356 Fan
- Posts: 1471
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
Re: Luggage Rack Bolts
okay - Thanks.
I will run the tap through the hole first, then see if I can find 60 mm and 70mm length.
Will report back in a few days.
I will run the tap through the hole first, then see if I can find 60 mm and 70mm length.
Will report back in a few days.
-
- 356 Fan
- Posts: 4205
- Joined: Tue Mar 25, 2008 9:28 pm
Re: Luggage Rack Bolts
Bolts shown above are stainless with polished heads -- similar to originals.
-
- 356 Fan
- Posts: 4205
- Joined: Tue Mar 25, 2008 9:28 pm
Re: Luggage Rack Bolts
BTW, those bolts are DIN 931, 8 x 70, not something usually found at Ace Hardware.
- Jim Clement
- 356 Fan
- Posts: 1471
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
Re: Luggage Rack Bolts
Thanks Brad.
I will likely add them to my next order that is coming up shortly..
I will likely add them to my next order that is coming up shortly..
- Jay Wiener
- 356 Fan
- Posts: 574
- Joined: Thu May 31, 2012 1:27 am
- Location: Los Angeles
- Contact:
Re: Luggage Rack Bolts
I have an extra used set
- Jim Liberty
- 356 Registry Member
- Posts: 4320
- Joined: Tue May 06, 2008 3:47 pm
- Tag: Jim
- Location: Orange Co., CA
- Contact:
Re: Luggage Rack Bolts
Brad, as I've said in the past, "You are a Treasure". .........Jim.
Jim Liberty
- Jim Clement
- 356 Fan
- Posts: 1471
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
Re: Luggage Rack Bolts
Thanks, Brad - there's always more going on than meets the eye. I take back my statement aboveBrad Ripley wrote: ↑Wed May 11, 2022 12:10 pm BTW, those bolts are DIN 931, 8 x 70, not something usually found at Ace Hardware.
Greg Bryan
- Tom Keating
- 356 Fan
- Posts: 381
- Joined: Wed Mar 26, 2008 3:13 pm
- Location: Jacksonville,Florida
- Mike Wilson
- Classifieds Monitor
- Posts: 11622
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Luggage Rack Bolts
When I had the rack on my car, I used nylon washers between the bolt head and rack to prevent scratching the chrome.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Mathieu Lecomte
- 356 Fan
- Posts: 74
- Joined: Sun Oct 22, 2017 5:59 am
- Location: South Orange, NJ
Re: Luggage Rack Bolts
For future reference if you need metric bolts and nuts, washers, etc. You should consider using Belmetric (www.belmetric.com) - they have a huge selection, cheap to purchase, good quality and ships fast...