Wheelspacers
- Joost van der Velden
- 356 Fan
- Posts: 219
- Joined: Wed Mar 26, 2008 4:07 pm
- Location: The Netherlands
Wheelspacers
Maybe a stupid question but where are wheel spacers used for?
Porsche 356 BT6 S90 1962
VW Beetle 1302S 1971
Porsche 911 SC 1980
VW Beetle 1302S 1971
Porsche 911 SC 1980
- Richard Beecher
- 356 Fan
- Posts: 4
- Joined: Sat Apr 12, 2008 8:46 am
- Location: central michigan
-
- 356 Fan
- Posts: 2506
- Joined: Thu Mar 27, 2008 9:14 am
- Tag: Official curmudgeon
- Location: Ft Collins CO
Wheelspacers
Joost,
On the Carrera GT the rear wheels are spaced outward to compensate for the wide front brake drums.
On the 356B's I've spaced all the wheels to give a better look especialy with stock rims.
I haven't messed with the C cars wheels.
Norm
Post generated using Mail2Forum via email.
On the Carrera GT the rear wheels are spaced outward to compensate for the wide front brake drums.
On the 356B's I've spaced all the wheels to give a better look especialy with stock rims.
I haven't messed with the C cars wheels.
Norm
Post generated using Mail2Forum via email.
-
- 356 Fan
- Posts: 777
- Joined: Fri Mar 14, 2008 9:47 pm
- Location: South Orange NJ
- Al Zim
- 356 Fan
- Posts: 4373
- Joined: Thu Mar 27, 2008 12:37 pm
- Location: FT.WORTH/DALLAS TEXAS
- Contact:
WHEEL SPACERS
I use them because I like the looks of the wheel as it is closer to the fender. driving behind a 356 and looking at the skinny wheel well inside the car is just b... Ugly. al zim
www.allzim.com
356 Parts and Services
www.facebook.com/ZimsAuto/
www.instagram.com/zims_autotechnik/
356 Parts and Services
www.facebook.com/ZimsAuto/
www.instagram.com/zims_autotechnik/
- Ashley Page
- 356 Fan
- Posts: 841
- Joined: Sun Mar 09, 2008 6:08 pm
- Location: Davidson, NC
- Contact:
Re: WHEEL SPACERS
Does Zim's offer a selection of longer wheel studs?Al Zim wrote:I use them because I like the looks of the wheel as it is closer to the fender. driving behind a 356 and looking at the skinny wheel well inside the car is just b... Ugly. al zim
- Joost van der Velden
- 356 Fan
- Posts: 219
- Joined: Wed Mar 26, 2008 4:07 pm
- Location: The Netherlands
Re: WHEEL SPACERS
I agree....what dimension of spacer is normally used for the back of the car (4,5 inch wheels) where the wheels do not get too close to the fenders?Al Zim wrote:I use them because I like the looks of the wheel as it is closer to the fender. driving behind a 356 and looking at the skinny wheel well inside the car is just b... Ugly. al zim
Porsche 356 BT6 S90 1962
VW Beetle 1302S 1971
Porsche 911 SC 1980
VW Beetle 1302S 1971
Porsche 911 SC 1980
Wheelspacers
It depends which type of body you have, Reutter or Karmann.
Years ago I checked with a "taylor-tape-measure" to compare a
( for me) visible difference of the car's backside.
I measured from the edge of the rear side windows down to the fender,
the Karmann-body had 15 mm more in length than the Reutter
at each side. Don't know what they made at Karmann, stretched the metal...?
At my Karmann-body I've 5 1/2 rims with 195/65/15 tires and
25 mm spacers as discs (Porsche-part-# 477 501 701) and longer
studs ( part-# 901 331 671 01) and there is space as wide as a finger
between the tire and the fender.
A friend with his Reutter-body has 185-tires on 5 1/2 rims w/o spacers
and the tire is almost touching the fender !!
So, before using spacers make some measurements.
Rolf
Years ago I checked with a "taylor-tape-measure" to compare a
( for me) visible difference of the car's backside.
I measured from the edge of the rear side windows down to the fender,
the Karmann-body had 15 mm more in length than the Reutter
at each side. Don't know what they made at Karmann, stretched the metal...?
At my Karmann-body I've 5 1/2 rims with 195/65/15 tires and
25 mm spacers as discs (Porsche-part-# 477 501 701) and longer
studs ( part-# 901 331 671 01) and there is space as wide as a finger
between the tire and the fender.
A friend with his Reutter-body has 185-tires on 5 1/2 rims w/o spacers
and the tire is almost touching the fender !!
So, before using spacers make some measurements.
Rolf
-
- Registry Hall of Fame
- Posts: 41
- Joined: Fri Mar 14, 2008 8:30 am
- Location: St. Petersburg, FL
Wheelspacers
All,
Mine is a '65 C Cab(Porsche manufacture after they had purchased the
Reutter body works); wheel spacers are not always needed or necessary.
I have been running Michelin Primacy 195x65x15 on all 4 wheels which
are 5.5 inch stock early 911 rims, for several years, about 20K
miles/30K KMs. I use no spacers and have the stock wheel studs still
installed. The tires nicely fit in the wheel housing cavities with no
clearance or rubbing issues, nor are they almost touching any fender.
I did replace the front wheel stops and estimate that they required
almost one additional thread more than the original stock wheel stops.
Compared with stock 165x78x15 tires on 4.5 inch wheels, these 195's
can feel heavy thru the steering, but this can be mitigated with
additional tweaking and equipment. Details available separately.
Good luck, George in Atlanta
On 4/30/08, Rolf G. Krogmeyer <porsche-356@arcor.de> wrote:
Mine is a '65 C Cab(Porsche manufacture after they had purchased the
Reutter body works); wheel spacers are not always needed or necessary.
I have been running Michelin Primacy 195x65x15 on all 4 wheels which
are 5.5 inch stock early 911 rims, for several years, about 20K
miles/30K KMs. I use no spacers and have the stock wheel studs still
installed. The tires nicely fit in the wheel housing cavities with no
clearance or rubbing issues, nor are they almost touching any fender.
I did replace the front wheel stops and estimate that they required
almost one additional thread more than the original stock wheel stops.
Compared with stock 165x78x15 tires on 4.5 inch wheels, these 195's
can feel heavy thru the steering, but this can be mitigated with
additional tweaking and equipment. Details available separately.
Good luck, George in Atlanta
On 4/30/08, Rolf G. Krogmeyer <porsche-356@arcor.de> wrote:
Post generated using Mail2Forum via email.It depends which type of body you have, Reutter or Karmann.
Years ago I checked with a "taylor-tape-measure" to compare a
( for me) visible difference of the car's backside.
I measured from the edge of the rear side windows down to the fender,
the Karmann-body had 15 mm more in length than the Reutter
at each side. Don't know what they made at Karmann, stretched the metal...?
At my Karmann-body I've 5 1/2 rims with 195/65/15 tires and
25 mm spacers as discs (Porsche-part-# 477 501 701) and longer
studs ( part-# 901 331 671 01) and there is space as wide as a finger
between the tire and the fender.
A friend with his Reutter-body has 185-tires on 5 1/2 rims w/o spacers
and the tire is almost touching the fender !!
So, before using spacers make some measurements.
Rolf
________________________________
Rolf G. Krogmeyer
-------------------- m2f --------------------
To contact an administrator admin@356registry.com
To unsubscribe go to
http://www.356registry.com/forum/m2f_usercp.php
Read this topic online here:
http://356registry.com/forum/viewtopic.php?p=4297#4297
-------------------- m2f --------------------
- Mark Pribanic
- 356 Fan
- Posts: 2416
- Joined: Sun Mar 09, 2008 9:11 pm
- Tag: Drive 'Em!
- Location: Neptune Beach, Florida USA
- Contact:
What size spacers are used on GT's? They look like they are on steroids....
Here's a pic of some stout wheel spacers on a 1961 GT in Jacksonville:
My coupe has spacers that look like oversized washers. I don't have a pic on hand but can post some if anyone wants to see the differences between the GT & the ones on my coupe.
Here's a pic of some stout wheel spacers on a 1961 GT in Jacksonville:
My coupe has spacers that look like oversized washers. I don't have a pic on hand but can post some if anyone wants to see the differences between the GT & the ones on my coupe.
Mark Pribanic
Registry# 13617
Florida Owners Group Trustee - 2008-2010
Neptune Beach, Florida USA
Instagram: Mark.Pribanic
Registry# 13617
Florida Owners Group Trustee - 2008-2010
Neptune Beach, Florida USA
Instagram: Mark.Pribanic
- Gerry McCarthy
- 356 Fan
- Posts: 383
- Joined: Thu Mar 27, 2008 4:32 pm
- Location: Prospect, CT.
Wheelspacers
Note that the GT cars have 60MM brakes in front, 40MM brakes,with20MM spacers in the rear, and special wheels with 16MM greater negative offset, giving the GT cars a tread increase of 8MM
----- Original Message ----
From: Mark Pribanic <pribanic356@yahoo.com>
To: 356talk@356registry.com
Sent: Wednesday, April 30, 2008 11:17:10 AM
Subject: [356Talk] Re: Wheelspacers
What size spacers are used on GT's? They look like they are on steroids....
Here's a pic of some stout wheel spacers on a 1961 GT in Jacksonville:
[Image: http://i169.photobucket.com/albums/u235 ... C03559.jpg ]
My coupe has spacers that look like oversized washers. I don't have a pic on hand but can post some if anyone wants to see the differences between the GT & the ones on my coupe.
------------------------
Drive 'Em!
Mark Pribanic
1958 Coupe
Neptune Beach, Florida
Registry# 13617
Post generated using Mail2Forum via email.
----- Original Message ----
From: Mark Pribanic <pribanic356@yahoo.com>
To: 356talk@356registry.com
Sent: Wednesday, April 30, 2008 11:17:10 AM
Subject: [356Talk] Re: Wheelspacers
What size spacers are used on GT's? They look like they are on steroids....
Here's a pic of some stout wheel spacers on a 1961 GT in Jacksonville:
[Image: http://i169.photobucket.com/albums/u235 ... C03559.jpg ]
My coupe has spacers that look like oversized washers. I don't have a pic on hand but can post some if anyone wants to see the differences between the GT & the ones on my coupe.
------------------------
Drive 'Em!
Mark Pribanic
1958 Coupe
Neptune Beach, Florida
Registry# 13617
Post generated using Mail2Forum via email.
Gerry Mc
- Jaime Jensen
- 356 Fan
- Posts: 143
- Joined: Wed Apr 02, 2008 8:57 pm
- Tag: Cruising in my late daddy's Speedster.
- Location: San Anselmo, CA
- Instagram: @jaimejensensf
- Contact:
Wheelspacers
I have a Reutter '58 Speedster and have a credit card clearance on the drivers side, 5.5 wheels,
185 x 65 tires. I would like to use the spacers as I think it might help cool the brake drums but can't do it on this car
Stan
On 4/30/08, Rolf G. Krogmeyer <porsche-356@arcor.de (porsche-356@arcor.de)> wrote:
185 x 65 tires. I would like to use the spacers as I think it might help cool the brake drums but can't do it on this car
Stan
On 4/30/08, Rolf G. Krogmeyer <porsche-356@arcor.de (porsche-356@arcor.de)> wrote:
Post generated using Mail2Forum via email.It depends which type of body you have, Reutter or Karmann.
Years ago I checked with a "taylor-tape-measure" to compare a
( for me) visible difference of the car's backside.
I measured from the edge of the rear side windows down to the fender,
the Karmann-body had 15 mm more in length than the Reutter
at each side. Don't know what they made at Karmann, stretched the metal...?
At my Karmann-body I've 5 1/2 rims with 195/65/15 tires and
25 mm spacers as discs (Porsche-part-# 477 501 701) and longer
studs ( part-# 901 331 671 01) and there is space as wide as a finger
between the tire and the fender.
A friend with his Reutter-body has 185-tires on 5 1/2 rims w/o spacers
and the tire is almost touching the fender !!
So, before using spacers make some measurements.
Rolf
------------------------
Rolf G. Krogmeyer
Jaime Jensen
'58 Speedster
'58 Speedster
-
- 356 Fan
- Posts: 2506
- Joined: Thu Mar 27, 2008 9:14 am
- Tag: Official curmudgeon
- Location: Ft Collins CO
wheel spacers
In the early 60's when wider tires became available for racing we needed more flare on the rear wheels.
Changing the body wasn't legal.
We found that backing the car (minus bumper) squarely against a smooth wall would sufficiently bow the rear wells at the right spot for clearance.
Honest cheating at work.
That said, some cars having experienced minor trauma from the rear could be so afflicted if only on one side. Tweaking the brace between the rear panel and chassis could cure thi problem without messing up the paint.
My 59 GT has never been hit and I run the Carrera spacers in the rear with 5 1/2" off set wheels and 195-60 X15 tires and have 1/8" clearance. ( 2deg neg camber )
Norm
Changing the body wasn't legal.
We found that backing the car (minus bumper) squarely against a smooth wall would sufficiently bow the rear wells at the right spot for clearance.
Honest cheating at work.
That said, some cars having experienced minor trauma from the rear could be so afflicted if only on one side. Tweaking the brace between the rear panel and chassis could cure thi problem without messing up the paint.
My 59 GT has never been hit and I run the Carrera spacers in the rear with 5 1/2" off set wheels and 195-60 X15 tires and have 1/8" clearance. ( 2deg neg camber )
Norm
wheel spacers
Other than looks, what would be the utility of putting wheel spacers on my 62 S90 b coupe with 165/15 tires, and 4 1/2" wheels? Does the fact that I have a camber compenstor spring figure into the calculation in any way. Right now, my clearance on either side of the rear of the car is about the width of my finger. And I only care about that when I'm rubbing on the Armorall. Jim Slawson, SF Bay area