The painter is passing by today to install the windshield, that is the reason I have not pick up the car, the guy that did the interior done it before he will help the painter
Doug McDonnell wrote: ↑Wed Oct 09, 2019 5:02 pm
You are getting close. I have never installed a windshield with the dash pad in place. Wonder if it will be removed to install the windshield?
This past weekend I finally clean up the wheels
Part bin is finally getting smaller, maybe total of 15 parts left to clean and install
Bumpers will be last I guess
Antonio
73321899_454330698544888_2441137635838656512_n.jpg (559.6 KiB) Viewed 1555 times
74584012_735540886958846_4778017126705266688_n.jpg (33.11 KiB) Viewed 1555 times
73399752_418402828844843_2427677023649398784_n.jpg (443.12 KiB) Viewed 1555 times
74649819_715508868956469_3925910561665056768_n.jpg (496.33 KiB) Viewed 1555 times
74218606_2163077363988140_3740867066857521152_n.jpg (32.27 KiB) Viewed 1555 times
73158536_1381710395317717_7990416221868654592_n.jpg (422.66 KiB) Viewed 1555 times
Today I took the 356 out for a short drive and notice cold coming in from the middle front part of the top.
After getting home I open the top and notice when they redo the top they made a wood shim and put under the middle hatch on the top part. I remove the middle hatch and remove the wood shim . But now the hatch will not close all the way and I notice the rubber part on the top is not sealing correctly only left and right side is.
I am going to call the person that redid the top and the interior of the car but I was wondering if anyone had same problem
Yes you are right needs to be replaced I talk with dude that did my top he is aware of it, just sucks because would have been so much easier when he was working on it
Martin Benade wrote: ↑Sun Nov 10, 2019 12:04 am
Normally the bows would be separate. Your car looks fantastic by the way!