Muffler and starter
-
- 356 Fan
- Posts: 36
- Joined: Mon Jul 25, 2011 1:03 pm
Muffler and starter
I'm tired of the noise from my sport muffler and want to replace it with a nice quiet stock one. Any suggestions as to finding the best for the money. My car is running great and I want to do some extended driving. Also, the engine out of the car for a 6 volt starter rebuild among other things. Any suggestions ?
- Thomas Sottile
- 356 Fan
- Posts: 1535
- Joined: Wed Mar 26, 2008 3:02 pm
- Location: Stamford CT
- Contact:
Re: Muffler and starter
Try to fine a use old one in good cond
-
- 356 Fan
- Posts: 307
- Joined: Tue Apr 08, 2008 2:19 pm
- Location: Texas South Plains
- Doug McDonnell
- 356 Fan
- Posts: 6084
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: Muffler and starter
I recommend abcpartswerks or Zims for your starter rebuild. And YES replace the bushing.
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
-
- 356 Fan
- Posts: 200
- Joined: Mon Jun 02, 2008 10:23 pm
- Location: Silver Spring, Md
Re: Muffler and starter huh
+1 for abcpartswerks and Zims.
Bill Tate
Drive your Tub for improved mental health.
Drive your Tub for improved mental health.
- George Hussey
- 356 Fan
- Posts: 757
- Joined: Tue Mar 24, 2009 12:22 pm
- Location: atlanta georgia
- Contact:
Re: Muffler and starter
there are rebuilt bosch starters readily available and come with the bushing, also the best muffler to use these days is by dansk
George Hussey
- Dave Wildrick
- 356 Fan
- Posts: 1953
- Joined: Wed Mar 26, 2008 2:10 pm
- Location: Houston, TX
Re: Muffler and starter
You've got to be kidding!
The Dansk clone of the Leistritz stock muffler is the most problem-ridden muffler out there. It has welds that break, pipes that don't align with the head attachment points, and connections to the j-pipes that are too large in diameter to fit right. If you buy one to save money, like I did, by the time you correct all of those things, you will wish you had paid the $1000 for a good stainless steel Leistritz clone, like the M&K muffler. There are multiple threads on 356talk that back up what I'm saying. Just ask Cliff Murray or Jim Learmonth about Dansks.
Dave Wildrick
Houston, TX
#10230
64C coupe
65C coupe
Houston, TX
#10230
64C coupe
65C coupe
- Sebastian Gaeta
- 356 Fan
- Posts: 3060
- Joined: Tue Mar 25, 2008 5:50 pm
- Location: Ann Arbor, MI
Re: Muffler and starter
Dave Wildrick wrote: ↑Mon Aug 12, 2019 10:56 amYou've got to be kidding!
The Dansk clone of the Leistritz stock muffler is the most problem-ridden muffler out there. It has welds that break, pipes that don't align with the head attachment points, and connections to the j-pipes that are too large in diameter to fit right. If you buy one to save money, like I did, by the time you correct all of those things, you will wish you had paid the $1000 for a good stainless steel Leistritz clone, like the M&K muffler. There are multiple threads on 356talk that back up what I'm saying. Just ask Cliff Murray or Jim Learmonth about Dansks.
George always compliments the Dansk, perhaps it's because he sells them. Like everyone else who has any kind of experience with the Dansk, I gave up years ago and now use the far superior stainless choices that are out there.
Sebastian Gaeta
www.arbormotion.com
Registry #8339
'65 C coupe
'64 C cab
-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle
www.arbormotion.com
Registry #8339
'65 C coupe
'64 C cab
-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle
- John Clarke
- 356 Fan
- Posts: 2115
- Joined: Wed Aug 27, 2008 6:38 am
- Location: East Sussex, England
- Contact:
Re: Muffler and starter
All that Dave has just said
Our post submit buttons must have clashed at the same time ! and my post did not appear.
I have never heard someone actually recommend a Dansk muffler, George you were kidding right?
Regards Jay
Our post submit buttons must have clashed at the same time ! and my post did not appear.
I have never heard someone actually recommend a Dansk muffler, George you were kidding right?
Regards Jay
-
- 356 Fan
- Posts: 197
- Joined: Sat Mar 29, 2008 1:11 pm
- Location: Texas
Re: Muffler and starter
Summer 2017 I bought and attempted to install three different Dansk muffflers from two different sellers. Two of the mufflers were so misfitting that I was unable to put them on the engine. The pipes to number 2& 4 cylinders simply weren't in the same space as the exhaust ports on the engine. The third muffler was a force fit after many hours of beating and bending. After about a month the gasket on number 2 gave up and it was clear that the exhaust flange on the muffler was not going to mesh with the engine in the same plane. Stoddards and Sierra Madre accepted my returns and the third muffler is buried in my storage locker. I now happily have a muffler by Eisenmann Muffler in Germany. They didn't have any 356 mufflers but were willing to fabricate one. The craftsman at the plant contacted me to check that the dimensions of my engine were correct before he started. Three weeks and $1400 later delivered to my door a ceramic coated muffler complete with a set of hand crafted "S" pipes and clamps. The fit was perfect and installation took all of 30 minutes. That was my summer 2017.
I would now shop carefully as there are now good alternatives but I wouldn't buy a Dansk.
Jim Learmonth
65C Coupe
Houston,, TX
I would now shop carefully as there are now good alternatives but I wouldn't buy a Dansk.
Jim Learmonth
65C Coupe
Houston,, TX
-
- 356 Fan
- Posts: 446
- Joined: Fri Dec 03, 2010 7:42 am
Re: Muffler and starter
James,
Did you take any photographs of the Eisenmann Muffler ? Is it the same internal design as the Leistritz ?
Did you take any photographs of the Eisenmann Muffler ? Is it the same internal design as the Leistritz ?