CAD Drawing Needed!

For off-topic posts only (i.e. non 356 related content). No politics, religion or obscenity. Play nice!
Message
Author
User avatar
Sebastian Gaeta
356 Fan
Posts: 3047
Joined: Tue Mar 25, 2008 5:50 pm
Location: Ann Arbor, MI

CAD Drawing Needed!

#1 Post by Sebastian Gaeta »

Greetings all,

I am trying to make a set of one off bumperettes for my C coupe since I have removed the bumpers. I have had two friends start the project but then were not able to finish it due to just being to darned busy!

All I have is a scan in jpeg format, I want to go with the top profile in the image below. I have cardboard mock ups on the car so I know what it will look like, I just need someone with CAD experience to create a file, I have the machine shop that can do the cutting. Happy to pay for the services rendered.

I know we can do all sorts of cool stuff like rounded or beveled edges but right now I would be ecstatic just to get a basic file and be done with it. I want them to be 1/2" thick and do not want the slots or notch shown in the image.

Any ideas?
bumperette.jpg
bumperette.jpg (54.53 KiB) Viewed 3516 times
Sebastian Gaeta
www.arbormotion.com

Registry #8339

'65 C coupe
'64 C cab

-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle

Bob Watts
356 Fan
Posts: 418
Joined: Wed Jul 16, 2008 11:55 am
Location: Pocatello, Idaho

Re: CAD Drawing Needed!

#2 Post by Bob Watts »

Hi Sebastian,

I'm not sure what you are looking for but, maybe, something like this: a jpg and a dxf file.
I do dxf files that a shop uses to laser cut small models.
Let me know if there is anything I can change to help you.
I use Inkscape software to change a file from jpg to dxf. I have directions if anyone needs some help (or more confusion).

Whoops! Sorry, I can't attache the dxf file! Will look for your email.
bumperette3.jpg
bumperette3.jpg (20.46 KiB) Viewed 3495 times
Bob Watts

Bob Watts
356 Fan
Posts: 418
Joined: Wed Jul 16, 2008 11:55 am
Location: Pocatello, Idaho

Re: CAD Drawing Needed!

#3 Post by Bob Watts »

VW1954jpg15.jpg
VW1954jpg15.jpg (100.59 KiB) Viewed 3495 times
Bob Watts

User avatar
Sebastian Gaeta
356 Fan
Posts: 3047
Joined: Tue Mar 25, 2008 5:50 pm
Location: Ann Arbor, MI

Re: CAD Drawing Needed!

#4 Post by Sebastian Gaeta »

Hi Bob,

Very kind of you. Any type of file that can be fed to a laser cutter would be great.

I probably did not explain very well, on the original image, I don't want the slots or notch on the horizontal part, but do want the "cutout" in the bumperette where it is exposed outside of the car.

Here's a shot of the aforementioned cardboard mock ups:
.
bumperette 1.jpg
bumperette 1.jpg (1.5 MiB) Viewed 3488 times

Here is what I am trying to emulate:
.
bumperette 2.JPG
bumperette 2.JPG (193.62 KiB) Viewed 3488 times

.
Your help is greatly appreciated.
Sebastian Gaeta
www.arbormotion.com

Registry #8339

'65 C coupe
'64 C cab

-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle

User avatar
Bruce Hagopian
356 Fan
Posts: 153
Joined: Sun Dec 21, 2008 8:13 pm
Location: Fresno, CA

Re: CAD Drawing Needed!

#5 Post by Bruce Hagopian »

Laser cutting won't be "period correct".
Bruce Hagopian

Bob Watts
356 Fan
Posts: 418
Joined: Wed Jul 16, 2008 11:55 am
Location: Pocatello, Idaho

Re: CAD Drawing Needed!

#6 Post by Bob Watts »

Sebastian,
Check your email for a corrected dxf file.
Any questions?
Bob
Bob Watts

Bob Watts
356 Fan
Posts: 418
Joined: Wed Jul 16, 2008 11:55 am
Location: Pocatello, Idaho

Re: CAD Drawing Needed!

#7 Post by Bob Watts »

bumperette6.jpg
bumperette6.jpg (22.33 KiB) Viewed 3471 times
Sorry. I can't figure out how to just use an Edit function, like in the previous system.
Moderator, you can just delete the sample VW. Thanks!
Bob
Bob Watts

User avatar
Emil Wojcik
356 Fan
Posts: 1521
Joined: Tue Mar 25, 2008 7:20 pm
Location: Metuchen, NJ

Re: CAD Drawing Needed!

#8 Post by Emil Wojcik »

So they're a combination of bumpers and tow hooks, cool.
Emil Wojcik
'64 356C Euro coupe
'78 MGB
'86 Jaguar XJ6 Series 3
'94 MB E420

User avatar
Sebastian Gaeta
356 Fan
Posts: 3047
Joined: Tue Mar 25, 2008 5:50 pm
Location: Ann Arbor, MI

Re: CAD Drawing Needed!

#9 Post by Sebastian Gaeta »

Bob Watts wrote: Fri Jun 28, 2019 4:57 pm bumperette6.jpgSorry. I can't figure out how to just use an Edit function, like in the previous system.
Moderator, you can just delete the sample VW. Thanks!
Bob
That's it Bob! I don't see anything in my email though.

How about trying sebastian@arbormotion.com

Much appreciated!
Sebastian Gaeta
www.arbormotion.com

Registry #8339

'65 C coupe
'64 C cab

-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle

User avatar
Doug McDonnell
356 Fan
Posts: 6061
Joined: Sat Apr 05, 2008 8:21 am
Location: Augusta,Michigan

Re: CAD Drawing Needed!

#10 Post by Doug McDonnell »

Check with the company who will make them. They probably have a preferred file type. At least that is what my friend who taught Cad/Cam at a junior college told me to tell you.
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.

User avatar
Eric McKinley
356 Fan
Posts: 1348
Joined: Sat Dec 21, 2013 12:09 pm
Location: Belfast, Northern Ireland

Re: CAD Drawing Needed!

#11 Post by Eric McKinley »

Sebastian, that will be a nice look.

The rubber grommets you have on the holes, where did you source those.

User avatar
Sebastian Gaeta
356 Fan
Posts: 3047
Joined: Tue Mar 25, 2008 5:50 pm
Location: Ann Arbor, MI

Re: CAD Drawing Needed!

#12 Post by Sebastian Gaeta »

Hi Bob,

Sorry for the late reply, I was crammed all weekend. I received the file and really appreciate your help. I will let you know how it turns out!
Sebastian Gaeta
www.arbormotion.com

Registry #8339

'65 C coupe
'64 C cab

-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle

User avatar
Eric McKinley
356 Fan
Posts: 1348
Joined: Sat Dec 21, 2013 12:09 pm
Location: Belfast, Northern Ireland

Re: CAD Drawing Needed!

#13 Post by Eric McKinley »

Would you consider putting the cad drawing out there for other members should they wish to have a set produced.

User avatar
Eric McKinley
356 Fan
Posts: 1348
Joined: Sat Dec 21, 2013 12:09 pm
Location: Belfast, Northern Ireland

Re: CAD Drawing Needed!

#14 Post by Eric McKinley »

So that's a no then.

User avatar
Vic Skirmants
Registry Hall of Fame
Posts: 9276
Joined: Tue Oct 27, 2009 5:02 pm
Location: SE Michigan
Contact:

Re: CAD Drawing Needed!

#15 Post by Vic Skirmants »

You think he might be a little busy, so can't find the time to answer you immediately?
We Yanks have been celebrating our own BREXIT here around July 4. :D

Post Reply