356C rubber floormat installation
- Guido Kwikkers
- 356 Fan
- Posts: 82
- Joined: Tue Nov 08, 2011 5:00 pm
- Location: ex-Haarlem car, soon in Germany
356C rubber floormat installation
I am finishing the interior of my 356 c coupe (1964).
Would like to know the exact places for the fasteners, is there a drawing or photo available?
Thanks inadvance
Would like to know the exact places for the fasteners, is there a drawing or photo available?
Thanks inadvance
- Mike Wilson
- Classifieds Monitor
- Posts: 11636
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: 356C rubber floormat installation
Do you have the original floor boards? If so, you can line up the fasteners on the mat with the ones on the boards. If not, I'm sure someone will post pics.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Guido Kwikkers
- 356 Fan
- Posts: 82
- Joined: Tue Nov 08, 2011 5:00 pm
- Location: ex-Haarlem car, soon in Germany
Re: 356C rubber floormat installation
I checked, but the wooden floorboards were replaced by new ones.
Now looking for th exact or correct place to install the fasteners
Now looking for th exact or correct place to install the fasteners
- Doug McDonnell
- 356 Fan
- Posts: 6084
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: 356C rubber floormat installation
Picture of drivers side floor board with it's 2 snaps in this link. No dimensions though: viewtopic.php?f=1&t=39840&p=247867&hili ... at#p247867
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
- Guido Kwikkers
- 356 Fan
- Posts: 82
- Joined: Tue Nov 08, 2011 5:00 pm
- Location: ex-Haarlem car, soon in Germany
Re: 356C rubber floormat installation
Dear Doug
Thank you for your help. Have to check how the passanger side is fastened.
Do you know (or have) a very original car type C (from 1964-5)?
Thank you for your help. Have to check how the passanger side is fastened.
Do you know (or have) a very original car type C (from 1964-5)?
- Doug McDonnell
- 356 Fan
- Posts: 6084
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: 356C rubber floormat installation
I also have reproduction floor boards and a new mat without snaps.
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
- Bill Waite
- 356 Fan
- Posts: 297
- Joined: Tue Mar 25, 2008 6:05 pm
- Location: Grand Rapids, Michigan
Re: 356C rubber floormat installation
Photos of our original 356C toe boards before & after restoration. If you need exact measurements, let me know.
Bill Waite
Grand Rapids, MI
1965 356C Coupe "Reversible Outlaw"
Grand Rapids, MI
1965 356C Coupe "Reversible Outlaw"
- Doug McDonnell
- 356 Fan
- Posts: 6084
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: 356C rubber floormat installation
Thanks Bill. I knew you would come through.
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
- Guido Kwikkers
- 356 Fan
- Posts: 82
- Joined: Tue Nov 08, 2011 5:00 pm
- Location: ex-Haarlem car, soon in Germany
Re: 356C rubber floormat installation
Thanks this will help! May be for future refernce it is possible to have exact measurements, I am sure this question will pop up in the future.
- Bill Waite
- 356 Fan
- Posts: 297
- Joined: Tue Mar 25, 2008 6:05 pm
- Location: Grand Rapids, Michigan
Re: 356C rubber floormat installation
Measurements to centers of snap fittings from toe board edges. In good old fashioned inches...
Bill Waite
Grand Rapids, MI
1965 356C Coupe "Reversible Outlaw"
Grand Rapids, MI
1965 356C Coupe "Reversible Outlaw"