Becker Europa Radio Repair - Capacitor Adventures
-
- 356 Fan
- Posts: 470
- Joined: Fri Oct 30, 2015 11:12 pm
- Tag: More is More
- Location: Port Orchard, WA
Becker Europa Radio Repair - Capacitor Adventures
Doing a bit of repair to prepare a Becker Europa radio for reinstallation. The power supply was in typical crusty condition with a readily apparent failed filter capacitor that had leaked inside of the chassis. The axial lead capacitors in these old radios are fairly straightforward to replace. What becomes a problem is the can style (Sprague trade name was Twist-Loc" large electrolytic capacitors that attach to the chassis with twisted tabs. There usually are not direct replacements for these and scabbing in axial lead or even radial lead capacitors does not work all that well. To that end, I decided to rebuild the two capacitors of this type in the radio. Not just to be a micromaniac (which I am), rather to have a mechanically sound installation when done. Here are some pictures of the project. I unsoldered the can in the supply, pried open the crimp on the mounting end of the can. Removed the innards (you can see how funky and corroded it gets. No wonder these old electrolytic caps fail. Then cleaned up the parts, drilled a couple of holes for leads in the insulator plate. Mounted up a suitable axial lead capacitor and put it back together. Not even noticeable when reinstalled and a good solid mobile radio capacitor installation.
-
- 356 Fan
- Posts: 470
- Joined: Fri Oct 30, 2015 11:12 pm
- Tag: More is More
- Location: Port Orchard, WA
Re: Becker Europa Radio Repair - Capacitor Adventures
Missed the picture showing the replacement cap that went in the can.
- Mervyn Hyde
- 356 Fan
- Posts: 797
- Joined: Wed Nov 25, 2015 9:12 pm
- Location: Sunshine Coast Australia
Re: Becker Europa Radio Repair - Capacitor Adventures
Excellent work Eric. My '62 Blaupunkt recently went off the 'air'. It is a hybrid (valve/transistor) unit. After disassembling it I decided that it wasn't anything obvious after checking on/off continuity and the fuses and thinking that (altho I had the circuit schematic) I needed a signal generator and more gear to find the problem location. I approached one of our many amateur classic radio clubs and there were 4 guys arguing over who would take the job on.
I can add - they wanted no payment, only any parts costs. Such enthusiasm. However, in the mean time I discovered some dirty valve pin connections and it works! At least I know next time where to take it.
I can add - they wanted no payment, only any parts costs. Such enthusiasm. However, in the mean time I discovered some dirty valve pin connections and it works! At least I know next time where to take it.
Merv
TYP356
1963 356B T6
1968 911 SWB
TYP356
1963 356B T6
1968 911 SWB
- Wes Bender
- 356 Fan
- Posts: 4861
- Joined: Wed Aug 27, 2008 10:54 am
- Location: Somewhere in the Gadsden Purchase, USA
Re: Becker Europa Radio Repair - Capacitor Adventures
Valve = Aussie for tube.... and Bob's your uncle.
Some days it's just not worth chewing through the restraints.....
- Randy Cook
- 356 Fan
- Posts: 116
- Joined: Tue Dec 10, 2013 12:14 pm
- Location: Silicon Valley, California
Re: Becker Europa Radio Repair - Capacitor Adventures
Many of the old Sprague can type electrolytics can be found on Antique Electronics website
https://www.tubesandmore.com
Used a lot by people repairing old tube audio and guitar amps.
https://www.tubesandmore.com
Used a lot by people repairing old tube audio and guitar amps.