Nerf Bars for a B T6, from where?
- Juha Vane
- 356 Fan
- Posts: 314
- Joined: Tue Jul 01, 2008 3:06 pm
- Location: Sumiainen, Finland
Re: Nerf Bars for a B T6, from where?
Jeffrey, please remember that I'm not native english so some
things are very difficult for me to express correctly.
Enclosed is a photo of the rear valance and the reflector is below
the rear bumper bracket opening.
About these brackets, removed front bumper and the brackets are
thick material and the bumper itself is thin. Wondering why this big
mismatch in material thickness. A strong bracket don't help a lot if
bumper itself is very weak. This is not criticism, just wondering.
things are very difficult for me to express correctly.
Enclosed is a photo of the rear valance and the reflector is below
the rear bumper bracket opening.
About these brackets, removed front bumper and the brackets are
thick material and the bumper itself is thin. Wondering why this big
mismatch in material thickness. A strong bracket don't help a lot if
bumper itself is very weak. This is not criticism, just wondering.
KTF,
Juha Vane
Finland
'59 308
'63 356
'85 911
Juha Vane
Finland
'59 308
'63 356
'85 911
-
- 356 Fan
- Posts: 1280
- Joined: Sun Apr 20, 2008 4:57 pm
- Location: Northeastern MA
Re: Nerf Bars for a B T6, from where?
Juha, your english and writing is better than than much of what we see from people here and is nothing to apologize for. I didn’t mean to criticize, I just don’t have an answer for this question. Has this been replaced during a restoration and therefore different materials were used than when the car was originally made?
Your reflectors look exactly like those on my T6 except newer and nicer.
Your reflectors look exactly like those on my T6 except newer and nicer.
< Jeff >
Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2
Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2
- Juha Vane
- 356 Fan
- Posts: 314
- Joined: Tue Jul 01, 2008 3:06 pm
- Location: Sumiainen, Finland
Re: Nerf Bars for a B T6, from where?
Jeffrey, didn’t take your comment as critism. I just know
how hard it’s sometimes to explain some things correctly.
I believe the brackets and bumpers are original, the front
bumper mounting plates are rusted.
Have to search the web to see how rear nerf bars are
installed. The front look in my eye much nicer without
bumper. Therefore I want to remove the rear also.
how hard it’s sometimes to explain some things correctly.
I believe the brackets and bumpers are original, the front
bumper mounting plates are rusted.
Have to search the web to see how rear nerf bars are
installed. The front look in my eye much nicer without
bumper. Therefore I want to remove the rear also.
KTF,
Juha Vane
Finland
'59 308
'63 356
'85 911
Juha Vane
Finland
'59 308
'63 356
'85 911
-
- 356 Fan
- Posts: 1280
- Joined: Sun Apr 20, 2008 4:57 pm
- Location: Northeastern MA
Re: Nerf Bars for a B T6, from where?
The rear bars will attach the same way the fronts do. You remove the rear bumper and its support where it attaches to the chassis/frame and bolt the Nerf bars to where the bumper supports previously attached. You may have to re-drill the holes in Nerf bars support to line everything up the way you want the final position of the Nerf bar.
< Jeff >
Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2
Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2
-
- 356 Fan
- Posts: 2506
- Joined: Thu Mar 27, 2008 9:14 am
- Tag: Official curmudgeon
- Location: Ft Collins CO
Re: Nerf Bars for a B T6, from where?
A variation for nerf bars/bumpers.
On my previous owned GT.
Still hanging in my shop's rafters.
These are solid steel and would stop a garbage truck.
These are for sale!
On my previous owned GT.
Still hanging in my shop's rafters.
These are solid steel and would stop a garbage truck.
These are for sale!
Last edited by Norm Miller on Fri Nov 02, 2018 12:02 am, edited 1 time in total.
-
- 356 Fan
- Posts: 41
- Joined: Sat Nov 05, 2016 1:36 pm
Re: Nerf Bars for a B T6, from where?
Hi Juha,
I've got a set in my garage, used them on my bt5. Please send me a message, will sell them. Sending from The Netherlands is possible I think.
I've got a set in my garage, used them on my bt5. Please send me a message, will sell them. Sending from The Netherlands is possible I think.
-
- 356 Fan
- Posts: 392
- Joined: Thu Feb 23, 2017 12:41 am
- Location: So Cal
Re: Nerf Bars for a B T6, from where?
Here is a set for sale; Check the pic and you can see the offset.
https://www.ebay.com/itm/porsche-356-ne ... rk:14:pf:0
https://www.ebay.com/itm/porsche-356-ne ... rk:14:pf:0
- Juha Vane
- 356 Fan
- Posts: 314
- Joined: Tue Jul 01, 2008 3:06 pm
- Location: Sumiainen, Finland
Re: Nerf Bars for a B T6, from where?
Thanks Martin,
What I have read, these are for an A:
viewtopic.php?f=1&t=45561&hilit=nerf+bars#p305440
The front for a T6 should look like this:
viewtopic.php?f=1&t=45561&hilit=nerf+bars#p305466
Still wondering how the rear should look like because the reflector is just under the
opening for bumper bracket.
What I have read, these are for an A:
viewtopic.php?f=1&t=45561&hilit=nerf+bars#p305440
The front for a T6 should look like this:
viewtopic.php?f=1&t=45561&hilit=nerf+bars#p305466
Still wondering how the rear should look like because the reflector is just under the
opening for bumper bracket.
KTF,
Juha Vane
Finland
'59 308
'63 356
'85 911
Juha Vane
Finland
'59 308
'63 356
'85 911
-
- 356 Fan
- Posts: 1280
- Joined: Sun Apr 20, 2008 4:57 pm
- Location: Northeastern MA
Re: Nerf Bars for a B T6, from where?
I specifically looked at the placement of my reflectors relative to the bumper bracket cutouts Juha, and your's look substantially the same as mine.
Jeff
Jeff
< Jeff >
Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2
Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2
- Juha Vane
- 356 Fan
- Posts: 314
- Joined: Tue Jul 01, 2008 3:06 pm
- Location: Sumiainen, Finland
Re: Nerf Bars for a B T6, from where?
Jeff, haven’t yet foun any good pictures how the rear nerf. bars look.
But still searching.
But still searching.
KTF,
Juha Vane
Finland
'59 308
'63 356
'85 911
Juha Vane
Finland
'59 308
'63 356
'85 911
- Brad K
- 356 Fan
- Posts: 44
- Joined: Thu Mar 19, 2015 1:31 am
Re: Nerf Bars for a B T6, from where?
craig has made several sets for my '62 t6 b notchback - i don't see his site anymore - here is his contact info, if he is still around:
Cam Fab Motor Sports
343 Quintana Road
Morro Bay, CA 93442
Phone: (805) 771-8012
hope this helps
Cam Fab Motor Sports
343 Quintana Road
Morro Bay, CA 93442
Phone: (805) 771-8012
hope this helps
356 Registry Member since 2007
1962 356 Hardtop 62 - aka Notchback - aka "OutlawR"
1973 911T/SC - R Gruppe #359
1976 914 2.1"S"
1966 Mercedes W111 Coupe, Euro, Sunroof
1953 Hudson Hornet Twin-H Sedan
1962 356 Hardtop 62 - aka Notchback - aka "OutlawR"
1973 911T/SC - R Gruppe #359
1976 914 2.1"S"
1966 Mercedes W111 Coupe, Euro, Sunroof
1953 Hudson Hornet Twin-H Sedan
-
- 356 Fan
- Posts: 1280
- Joined: Sun Apr 20, 2008 4:57 pm
- Location: Northeastern MA
Re: Nerf Bars for a B T6, from where?
Juha, in case you haven't seen this yet, here's a link to a recent classified posting showing the rear positioning of the bumper support holes and the tail lights. Of course this is of a C and you have a B T6, but it's the best depiction of mounting relationships I've seen so far.
https://porsche356registry.org/classifieds/22710
https://porsche356registry.org/classifieds/22710
< Jeff >
Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2
Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2
-
- 356 Fan
- Posts: 1280
- Joined: Sun Apr 20, 2008 4:57 pm
- Location: Northeastern MA
Re: Nerf Bars for a B T6, from where?
I just came across older F & B pictures of a C coupe with Nerf bars which will give you an idea of how they fit. Hope this helps you, Juha.
https://bringatrailer.com/2017/02/01/ba ... sche-356c/
https://bringatrailer.com/2017/02/01/ba ... sche-356c/
< Jeff >
Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2
Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2
- Jules Dielen
- 356 Fan
- Posts: 3206
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: Nerf Bars for a B T6, from where?
Yours look like they are in the right location Juha, maybe offset by a few centimeters, but should not interfere with the nerf bars. Why don't you go with the US setup and mount the reflectors above the tail lights?
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.
- Juha Vane
- 356 Fan
- Posts: 314
- Joined: Tue Jul 01, 2008 3:06 pm
- Location: Sumiainen, Finland
Re: Nerf Bars for a B T6, from where?
Thanks Jeffrey for the link. This is of course a personal preference, but I don't really
like if the nerf bars come above the tail lights or the reflectors below. And moving the
reflectors above the tail lights is something I don't really like. They look somewhat odd
there. But of course this is my opinion only. Let's see what I come up with.
like if the nerf bars come above the tail lights or the reflectors below. And moving the
reflectors above the tail lights is something I don't really like. They look somewhat odd
there. But of course this is my opinion only. Let's see what I come up with.
KTF,
Juha Vane
Finland
'59 308
'63 356
'85 911
Juha Vane
Finland
'59 308
'63 356
'85 911