Hey again Guys;
If possible I need some measurements for creating heat in the cabin of my T6. There were no rods connecting the flapper boxes to the heater cans, and was hoping that someone could get me something to work with.
I also am missing the the little “T’s” that the rods attach to, any info on those would be helpful as well.
Thank you,
Bob
Heater can rod info?
-
Robert Reed
- 356 Fan
- Posts: 309
- Joined: Thu Dec 08, 2011 3:18 pm
- Location: Lascassas, TN
-
David Jones
- Classifieds Moderator
- Posts: 7341
- Joined: Tue Mar 25, 2008 6:32 pm
- Tag: I wish I knew as much as I think I know.
- Location: Kentucky
Re: Heater can rod info?
Stoddard.
http://www.stoddard.com/64421170100.html
and you will need items 7 & 8 and the accompanying nut.
http://www.stoddard.com/64421170100.html
and you will need items 7 & 8 and the accompanying nut.
If I had known I would live this long I would have pushed the envelope a little harder.
Cymru am byth
David Jones #9715
Cymru am byth
David Jones #9715
-
Doug McDonnell
- 356 Fan
- Posts: 6079
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: Heater can rod info?
Albert sells the control rods with the correct bends in classifieds. https://porsche356registry.org/classifieds/1570
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.
-
Doug McDonnell
- 356 Fan
- Posts: 6079
- Joined: Sat Apr 05, 2008 8:21 am
- Location: Augusta,Michigan
Re: Heater can rod info?
Here is a primer: viewtopic.php?f=1&t=42239&hilit=heater+control+rods
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.