Pre A 2pc. Engine X2

For Pre A discussions and questions
Post Reply
Message
Author
User avatar
Joe Ruiz
356 Fan
Posts: 310
Joined: Thu Jul 17, 2008 10:26 am
Tag: https://www.instagram.com/okrasa/
Location: Eastside Costa Mesa, So. Califas.
Contact:

Pre A 2pc. Engine X2

#1 Post by Joe Ruiz »

Putting together a couple of Pre A 1500cc engines this week. :wink:

Image

User avatar
Joe Ruiz
356 Fan
Posts: 310
Joined: Thu Jul 17, 2008 10:26 am
Tag: https://www.instagram.com/okrasa/
Location: Eastside Costa Mesa, So. Califas.
Contact:

Re: Pre A 2pc. Engine X2

#2 Post by Joe Ruiz »

Pistons / Cyls. are installed. Now pre fitting the sheetmetal, exhaust, fuel lines and installing oil sump.
Image
Image
Image

Martin Bruechle
356 Fan
Posts: 392
Joined: Thu Feb 23, 2017 12:41 am
Location: So Cal

Re: Pre A 2pc. Engine X2

#3 Post by Martin Bruechle »

Very nice Joe. 2 thumbs up.

User avatar
Alan Hall
356 Fan
Posts: 1452
Joined: Wed Mar 26, 2008 12:06 pm
Location: Orinda, CA

Re: Pre A 2pc. Engine X2

#4 Post by Alan Hall »

Which piston and cylinders are you using Joe?

User avatar
Mike TEMPELS
356 Fan
Posts: 20
Joined: Sat Apr 26, 2008 1:01 am
Location: BELGIUM
Contact:

Re: Pre A 2pc. Engine X2

#5 Post by Mike TEMPELS »

Hello joe , can you provide some circular oil sumps, like this mounted on your engine ?
Regards

Mike
Mike TEMPELS
Manufacture Tempels

User avatar
Joe Ruiz
356 Fan
Posts: 310
Joined: Thu Jul 17, 2008 10:26 am
Tag: https://www.instagram.com/okrasa/
Location: Eastside Costa Mesa, So. Califas.
Contact:

Re: Pre A 2pc. Engine X2

#6 Post by Joe Ruiz »

Alan Hall wrote:Which piston and cylinders are you using Joe?
Hi Alan.

I'm using the Shasta Dura Bar iron cylinders and JE pistons/rings/pins/locks.

User avatar
Joe Ruiz
356 Fan
Posts: 310
Joined: Thu Jul 17, 2008 10:26 am
Tag: https://www.instagram.com/okrasa/
Location: Eastside Costa Mesa, So. Califas.
Contact:

Re: Pre A 2pc. Engine X2

#7 Post by Joe Ruiz »

Mike TEMPELS wrote:Hello joe , can you provide some circular oil sumps, like this mounted on your engine ?
Regards

Mike
Unfortunately, I only have 'em for my engine restorations.

User avatar
Mike TEMPELS
356 Fan
Posts: 20
Joined: Sat Apr 26, 2008 1:01 am
Location: BELGIUM
Contact:

Re: Pre A 2pc. Engine X2

#8 Post by Mike TEMPELS »

Joe , you do so a perfect work !
But send an engine from Europe to USA and back to have your awesome oil sump is too much for so a little guy like me . :D

Mike
Mike TEMPELS
Manufacture Tempels

Post Reply