Hi, I have a 59 A and am trying to replace the heater cables and it looks like I need to pull the shifter to access. I can't figure out how to pull the shifter. Any help would be appreciated.
Tim
Shifter disassembly
-
- 356 Fan
- Posts: 23
- Joined: Sat Feb 24, 2018 12:28 pm
- Location: Longmont Colorado
- Spencer Harris
- 356 Fan
- Posts: 1149
- Joined: Thu Mar 27, 2008 12:39 pm
- Location: San Joaquin Valley, California
Re: Shifter disassembly
These are from the '56 workshop manual. There were multiple gearbox mods through the A series, but looking at the shop manual component photos I believe your '59 shift linkage should be very similar if not identical. The last photo is from the '57 parts manual.
Spencer Harris
San Joaquin Valley, CA.
San Joaquin Valley, CA.
- Jim Clement
- 356 Fan
- Posts: 1471
- Joined: Tue Oct 26, 2010 10:46 am
- Tag: 1957 356 A Coupe
- Location: Calgary Alberta
Re: Shifter disassembly
here is the tunnel that the shifter sits on.
mine is a T1.. if yours is a T2, the shifter will be sit infront of the heater cable housing.
mine is a T1.. if yours is a T2, the shifter will be sit infront of the heater cable housing.
-
- 356 Fan
- Posts: 23
- Joined: Sat Feb 24, 2018 12:28 pm
- Location: Longmont Colorado
Re: Shifter disassembly
Thanks guys...