Part ID--What is this bracket/clamp for?
- Martin Benade
- 356 Fan
- Posts: 12345
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: Part ID--What is this bracket/clamp for?
With no part number visible, are you sure those are not 1969 BMW 2002 air cleaner rubber mounts, repurposed for this unknown bracket?
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
- C J Murray
- 356 Fan
- Posts: 9211
- Joined: Fri Oct 23, 2009 7:24 pm
- Location: 30MI WEST OF PHILA
- Contact:
Re: Part ID--What is this bracket/clamp for?
It does look English, rusty and too many fasteners.Jim Liberty wrote:Don't throw it away !!! Maybe it will fit my '53 Morgan. ..................Jim.
'57 Speedster
'59 Sunroof
'60 Devin D Porsche Race Car
'63 Cabriolet "Norm"
'67 911 S Original Owner
'03 Ferrari 575M
'09 Smart Passion
'59 Sunroof
'60 Devin D Porsche Race Car
'63 Cabriolet "Norm"
'67 911 S Original Owner
'03 Ferrari 575M
'09 Smart Passion
- Eric Wills
- 356 Fan
- Posts: 136
- Joined: Thu Mar 27, 2008 10:54 am
- Location: Fairfax, VA
- Contact:
Re: Part ID--What is this bracket/clamp for?
C J Murray wrote:It does look English, rusty and too many fasteners.Jim Liberty wrote:Don't throw it away !!! Maybe it will fit my '53 Morgan. ..................Jim.
It was found in a pile of wood dust, so.......
Eric Wills
-
- 356 Fan
- Posts: 4184
- Joined: Sun Apr 20, 2008 12:54 am
Re: Part ID--What is this bracket/clamp for?
Otherwise, re-cycle it & get a few cents.
- Mike DeJonge
- 356 Fan
- Posts: 699
- Joined: Thu Dec 25, 2008 7:58 pm
- Location: southern Ontario, Canada
- Contact:
Re: Part ID--What is this bracket/clamp for?
It is a fuel pump bracket for a 69-70 911. There were two versions. fits in the cavity where the steering rack is, the hump just behind the fuel tank. the melted rubber is from the anti vibration mounts which typically fail quite often
We would be very much interested in this part so we could reproduce. Very difficult to find a decent one which can be scanned.
If you are going to the Lit meet please bring and we will gladly accept.
If not going to the LA Lit meet contact us and I can have it picked up.
Mike
Restoration Design
We would be very much interested in this part so we could reproduce. Very difficult to find a decent one which can be scanned.
If you are going to the Lit meet please bring and we will gladly accept.
If not going to the LA Lit meet contact us and I can have it picked up.
Mike
Restoration Design
Mike dejonge
Restoration Design Inc.
52 Pre A Body Bumper X2
53 Pre A coupe
54 Pre A speedster
56 Speedster
60 D'letern Roadster
67 911
05 997
Restoration Design Inc.
52 Pre A Body Bumper X2
53 Pre A coupe
54 Pre A speedster
56 Speedster
60 D'letern Roadster
67 911
05 997
- Mike DeJonge
- 356 Fan
- Posts: 699
- Joined: Thu Dec 25, 2008 7:58 pm
- Location: southern Ontario, Canada
- Contact:
Re: Part ID--What is this bracket/clamp for?
drawing from original catalog
- Attachments
-
- pump bracket.pdf
- (83.21 KiB) Downloaded 160 times
Mike dejonge
Restoration Design Inc.
52 Pre A Body Bumper X2
53 Pre A coupe
54 Pre A speedster
56 Speedster
60 D'letern Roadster
67 911
05 997
Restoration Design Inc.
52 Pre A Body Bumper X2
53 Pre A coupe
54 Pre A speedster
56 Speedster
60 D'letern Roadster
67 911
05 997
- Mike DeJonge
- 356 Fan
- Posts: 699
- Joined: Thu Dec 25, 2008 7:58 pm
- Location: southern Ontario, Canada
- Contact:
Re: Part ID--What is this bracket/clamp for?
the locating pin on the bracket actually fits into a depression on the steering rack, so it can be located properly, just like the locating pin on the steering boxes from the 356 cars
Mike dejonge
Restoration Design Inc.
52 Pre A Body Bumper X2
53 Pre A coupe
54 Pre A speedster
56 Speedster
60 D'letern Roadster
67 911
05 997
Restoration Design Inc.
52 Pre A Body Bumper X2
53 Pre A coupe
54 Pre A speedster
56 Speedster
60 D'letern Roadster
67 911
05 997
- Mike Wilson
- Classifieds Monitor
- Posts: 11621
- Joined: Tue Apr 15, 2008 4:37 pm
- Location: SW Los Angeles
Re: Part ID--What is this bracket/clamp for?
Unreal! Good eye, Mike! I had a feeling it held a canister of some sort but had no clue it was for a Porsche. Another part saved and will be reproduced.
Mike
Mike
Mike Wilson
Lomita, CA
'63 B coupe
Lomita, CA
'63 B coupe
- Eric Wills
- 356 Fan
- Posts: 136
- Joined: Thu Mar 27, 2008 10:54 am
- Location: Fairfax, VA
- Contact:
Re: Part ID--What is this bracket/clamp for?
Mike,
Are you sure? Very similar, but not the same. I see 1 clamp and 1 rubber mount on the .pdf This old part has 2 of each. Thread continues until moderators flush it, where it probably belongs. If not identified by Hershey in April, I can bring it there.
EW
Are you sure? Very similar, but not the same. I see 1 clamp and 1 rubber mount on the .pdf This old part has 2 of each. Thread continues until moderators flush it, where it probably belongs. If not identified by Hershey in April, I can bring it there.
EW
Eric Wills
- Eric Wills
- 356 Fan
- Posts: 136
- Joined: Thu Mar 27, 2008 10:54 am
- Location: Fairfax, VA
- Contact:
Re: Part ID--What is this bracket/clamp for?
One more detail, the clamps with welded nuts on the clamps are 14mm ATF. Bolts 13mm. Very 1965ish.
Last edited by Eric Wills on Tue Feb 27, 2018 9:36 pm, edited 1 time in total.
Eric Wills
- Jim Breazeale
- Classifieds Monitor
- Posts: 2804
- Joined: Thu Mar 27, 2008 8:07 pm
- Tag: SF Giants Fan
- Location: SF Bay Area
- Contact:
Re: Part ID--What is this bracket/clamp for?
The first time I saw it I thought is was a fuel pump bracket but it just didn't look right to me so I didn't say anything. Close but no cigar.Eric Wills wrote:One more detail, the clamps with welded nuts are 14mm ATF. Bolts 13mm. Very 1965ish.
Regards
Jim
Jim Breazeale
www.easypor.com
www.facebook.com/pages/European-Auto-Salvage-Yard-EASY/120458108029410
www.easypor.com
www.facebook.com/pages/European-Auto-Salvage-Yard-EASY/120458108029410
- Eric Wills
- 356 Fan
- Posts: 136
- Joined: Thu Mar 27, 2008 10:54 am
- Location: Fairfax, VA
- Contact:
Re: Part ID--What is this bracket/clamp for?
Was hoping you would chime in, Jim. First thing we thought, too. But nobody seems to know what this is. Yet.
Eric Wills
- Mike DeJonge
- 356 Fan
- Posts: 699
- Joined: Thu Dec 25, 2008 7:58 pm
- Location: southern Ontario, Canada
- Contact:
Re: Part ID--What is this bracket/clamp for?
There is no doubt in my mind that it is the fuel pump bracket for an early 911. As I said there are 2 versions. in the parts diagram from the manual, it looks like a cast iron part, but in actuality it is a stamped part. Porsche was very inconsistent with the fuel pump brackets in these years. 1965-68 fuel pump was located in engine bay, 1969-71 the pump was located in the smugglers box and under the smugglers box and in 1973 a different bracket was located in the rear, inboard of the rear torsion tube mount.You can look in early parts manuals to confirm.
part numbers are:
901 356 501 00
901 356 053 00
901 356 505 00
901 356 505 01
901 356 506 00
999 512 130 02
999 512 164 02
part numbers are:
901 356 501 00
901 356 053 00
901 356 505 00
901 356 505 01
901 356 506 00
999 512 130 02
999 512 164 02
Mike dejonge
Restoration Design Inc.
52 Pre A Body Bumper X2
53 Pre A coupe
54 Pre A speedster
56 Speedster
60 D'letern Roadster
67 911
05 997
Restoration Design Inc.
52 Pre A Body Bumper X2
53 Pre A coupe
54 Pre A speedster
56 Speedster
60 D'letern Roadster
67 911
05 997
- Eric Wills
- 356 Fan
- Posts: 136
- Joined: Thu Mar 27, 2008 10:54 am
- Location: Fairfax, VA
- Contact:
Re: Part ID--What is this bracket/clamp for?
Still don't think it is a 911 fuel pump bracket. Replaced a 1970 S fuel pump not very long ago and parts looked just like the .pdf parts manual page you attached. Have a few 911s in the shop now, so understand the location mounting differences. Were fuel pumps on early 911 ever mounted from the factory, in or under the smuggler's box, or on the steering rack as you stated? I'm not trying to argue, I enjoy learning new details about our old cars.Mike DeJonge wrote:There is no doubt in my mind that it is the fuel pump bracket for an early 911. As I said there are 2 versions. in the parts diagram from the manual, it looks like a cast iron part, but in actuality it is a stamped part. Porsche was very inconsistent with the fuel pump brackets in these years. 1965-68 fuel pump was located in engine bay, 1969-71 the pump was located in the smugglers box and under the smugglers box and in 1973 a different bracket was located in the rear, inboard of the rear torsion tube mount.You can look in early parts manuals to confirm.
part numbers are:
901 356 501 00
901 356 053 00
901 356 505 00
901 356 505 01
901 356 506 00
999 512 130 02
999 512 164 02
That said, we can discuss the logistics of you scanning the part if you really want to. What part number and application would you sell the reproduced part as fitting?
Eric Wills
- Jim Breazeale
- Classifieds Monitor
- Posts: 2804
- Joined: Thu Mar 27, 2008 8:07 pm
- Tag: SF Giants Fan
- Location: SF Bay Area
- Contact:
Re: Part ID--What is this bracket/clamp for?
Fuel pumps were mounted at the steering gear in 69 and 70. They were moved to the LR in 71 and the bracket also served as the LR sway bar bushing mount.Eric Wills wrote:Still don't think it is a 911 fuel pump bracket. Replaced a 1970 S fuel pump not very long ago and parts looked just like the .pdf parts manual page you attached. Have a few 911s in the shop now, so understand the location mounting differences. Were fuel pumps on early 911 ever mounted from the factory, in or under the smuggler's box, or on the steering rack as you stated? I'm not trying to argue, I enjoy learning new details about our old cars.Mike DeJonge wrote:There is no doubt in my mind that it is the fuel pump bracket for an early 911. As I said there are 2 versions. in the parts diagram from the manual, it looks like a cast iron part, but in actuality it is a stamped part. Porsche was very inconsistent with the fuel pump brackets in these years. 1965-68 fuel pump was located in engine bay, 1969-71 the pump was located in the smugglers box and under the smugglers box and in 1973 a different bracket was located in the rear, inboard of the rear torsion tube mount.You can look in early parts manuals to confirm.
part numbers are:
901 356 501 00
901 356 053 00
901 356 505 00
901 356 505 01
901 356 506 00
999 512 130 02
999 512 164 02
That said, we can discuss the logistics of you scanning the part if you really want to. What part number and application would you sell the reproduced part as fitting?
Regards
Jim
PS: I still agree with you that your contraption is not a 69/70 a fuel pump mount
Jim Breazeale
www.easypor.com
www.facebook.com/pages/European-Auto-Salvage-Yard-EASY/120458108029410
www.easypor.com
www.facebook.com/pages/European-Auto-Salvage-Yard-EASY/120458108029410