Tecnomagnesio Wheel Fitment on Pre-A
- Frank Hood
- 356 Registry Member
- Posts: 120
- Joined: Mon Jul 14, 2008 10:08 pm
- Location: Bradenton, Florida
Tecnomagnesio Wheel Fitment on Pre-A
I have a set of Tecnomagnesio wheels and I would like to know if anyone has them on their Pre-A. I am currently running 15X6 Fuch wheels with disc brakes and I want to go back to drum brakes with 15X5 Tecnomagnesio wheels. Before I swap everything back and find out I have to deflate the tires to install them please let me know if they will fit. The Fuchs fit without any issues due to the rotor/hub being smaller than the original brake drum and I fear I will not be able to get the Tecnos on/off without deflating the tires.
Thanks in advance for your help!
Frank
Thanks in advance for your help!
Frank
- Jules Dielen
- 356 Fan
- Posts: 3204
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: Tecnomagnesio Wheel Fitment on Pre-A
Hey frank, depends on what size tire you are installing. The rim itself will fit just fine but you'll have troule installing even a 155 size width tire. (That's about a 5.50 on a 16). 145R15 would most likely clear the rear fenders but it will look silly on a 5" rim.
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.
- Frank Hood
- 356 Registry Member
- Posts: 120
- Joined: Mon Jul 14, 2008 10:08 pm
- Location: Bradenton, Florida
Re: Tecnomagnesio Wheel Fitment on Pre-A
Jules
I'm thinking about 185/65/15 tires and have come to realize I may have to carry a portable compressor just in case.
Many thanks
Frank
I'm thinking about 185/65/15 tires and have come to realize I may have to carry a portable compressor just in case.
Many thanks
Frank
- Jules Dielen
- 356 Fan
- Posts: 3204
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: Tecnomagnesio Wheel Fitment on Pre-A
Frank,
with 99% certainty those will not clear even when completely deflated. There is simply not enough clearance between the drum and the rear wheel arch.
iI had to deflate thr 5.50x16s to get them to clear on my 52 (with stock 280mm drums), and that is about the width of a 155 radial. Highly doubt you will be able to squeeze a 185 in there. I have 185/70 15 on my 57A and those barely clear.
Happy New year to all!
with 99% certainty those will not clear even when completely deflated. There is simply not enough clearance between the drum and the rear wheel arch.
iI had to deflate thr 5.50x16s to get them to clear on my 52 (with stock 280mm drums), and that is about the width of a 155 radial. Highly doubt you will be able to squeeze a 185 in there. I have 185/70 15 on my 57A and those barely clear.
Happy New year to all!
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.
- Randy Kaplin
- 356 Fan
- Posts: 66
- Joined: Sat Jun 28, 2008 1:05 pm
- Location: Tulsa Oklahoma
Re: Tecnomagnesio Wheel Fitment on Pre-A
Have 5" alloy wheels (purchased from Wilhiot a few years ago) installed and the tires are Michelin 165 - 15". They are not Tecnomagnesio wheels but sure look similar. Pretty sure the tires need to be deflated to fit on the rear ... very tight clearance. Have to agree with Jules that you are dreaming to think 185 would ever clear the body, the 165 is really tight.
- Bob Slayden
- 356 Fan
- Posts: 139
- Joined: Tue Mar 25, 2008 8:42 pm
- Location: Sandy Springs, GA
- Contact:
Re: Tecnomagnesio Wheel Fitment on Pre-A
Here are original 6" Technomagnesio's we just had installed on my son's '56 sunroof coupe by Franz Blam. (Look him up, Franz Blam Racing, 84 y/o Porsche factory trained back in the day.) It was quite a task, longer studs, spacers and the holes in the wheels had to be drilled to fit the standard diameter studs. No clearance issues except slight rub on full lock, a common issue with P185/65/15R tires.
Happy New Year,
Bob Slayden
Keep 'em on the road
Happy New Year,
Bob Slayden
Keep 'em on the road
- Jules Dielen
- 356 Fan
- Posts: 3204
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: Tecnomagnesio Wheel Fitment on Pre-A
Pre A's are a different animal, Bob. I ran 5.5x15 with 185/70/15 on my T1 with no problems. The rear axle goemetry on a pre A is different from a T1/ A
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.
- Vic Skirmants
- Registry Hall of Fame
- Posts: 9300
- Joined: Tue Oct 27, 2009 5:02 pm
- Location: SE Michigan
- Contact:
Re: Tecnomagnesio Wheel Fitment on Pre-A
The geometry is not different. The fender opening is much tighter.Jules Dielen wrote:Pre A's are a different animal, Bob. I ran 5.5x15 with 185/70/15 on my T1 with no problems. The rear axle goemetry on a pre A is different from a T1/ A
- Jules Dielen
- 356 Fan
- Posts: 3204
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: Tecnomagnesio Wheel Fitment on Pre-A
Doesnt the lower bump stop for the spring plate limit travel a lot more on the pre A?
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.
- Vic Skirmants
- Registry Hall of Fame
- Posts: 9300
- Joined: Tue Oct 27, 2009 5:02 pm
- Location: SE Michigan
- Contact:
Re: Tecnomagnesio Wheel Fitment on Pre-A
Yes. it limits the travel. That does not change the basic geometry.
- Jules Dielen
- 356 Fan
- Posts: 3204
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: Tecnomagnesio Wheel Fitment on Pre-A
ok that is what i meant. Less travel, not as big an angle when you lift the car, so less room for a tire (in addition to the fender arch)
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.
- Vic Skirmants
- Registry Hall of Fame
- Posts: 9300
- Joined: Tue Oct 27, 2009 5:02 pm
- Location: SE Michigan
- Contact:
Re: Tecnomagnesio Wheel Fitment on Pre-A
Exactly right.Jules Dielen wrote:ok that is what i meant. Less travel, not as big an angle when you lift the car, so less room for a tire (in addition to the fender arch)
- Steve Harrison
- 356 Fan
- Posts: 3301
- Joined: Sat Jan 24, 2009 11:39 am
- Location: Auburn AL
Re: Tecnomagnesio Wheel Fitment on Pre-A
Just knock a little off that stop where the spring plate hits with a small ziz wheel and it makes things a whole heck-o-a-lot easier as far as tires going on the rear. It doesn’t take much,...just a little bit because the stop is fairly close to the pivot point so by the time the extra travel gets out to the axle point the drop is magnified.
- Frank Hood
- 356 Registry Member
- Posts: 120
- Joined: Mon Jul 14, 2008 10:08 pm
- Location: Bradenton, Florida
Re: Tecnomagnesio Wheel Fitment on Pre-A
Thank you all for your knowledge and suggestions!
Not sure when I'll be going back to drum brakes but I'll be sure to post the outcome.
Thanks again
Frank
Not sure when I'll be going back to drum brakes but I'll be sure to post the outcome.
Thanks again
Frank
- Jules Dielen
- 356 Fan
- Posts: 3204
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: Tecnomagnesio Wheel Fitment on Pre-A
just go with the early Pre A 230mm drums. Easy access, but complete lack of stopping power. Can't win them all ![Sad :(](./images/smilies/icon_e_sad.gif)
![Sad :(](./images/smilies/icon_e_sad.gif)
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.