Porsche 356A Front Low or High Overrider Bar Determination
-
- 356 Fan
- Posts: 64
- Joined: Sat Apr 26, 2008 12:19 am
- Location: Livermore, CA
Porsche 356A Front Low or High Overrider Bar Determination
I have a leftover front overrider bar from my 1959 Cabriolet. How do you determine if it's low or high? Is there a certain length to determine? What is the going price for one that has new chrome and is in excellent condition? Thanks in advance for your help.
- David Jones
- Classifieds Moderator
- Posts: 7323
- Joined: Tue Mar 25, 2008 6:32 pm
- Tag: I wish I knew as much as I think I know.
- Location: Kentucky
Re: Porsche 356A Front Low or High Overrider Bar Determinati
Charles when was the car built? If after February 59 then it is likely it was the high bar. If before then the low. I can try measuring mine and let you know if nobody comes up with a measurement. I would say for one in good shape around $400.
If I had known I would live this long I would have pushed the envelope a little harder.
Cymru am byth
David Jones #9715
Cymru am byth
David Jones #9715
-
- 356 Fan
- Posts: 64
- Joined: Sat Apr 26, 2008 12:19 am
- Location: Livermore, CA
Re: Porsche 356A Front Low or High Overrider Bar Determinati
Thanks for the reply. It was purchased as a used part and not on the car. My 59 was produced in late 1958 and has the low overrider bar. It's impossible to compare the two without taking it apart.
- David Jones
- Classifieds Moderator
- Posts: 7323
- Joined: Tue Mar 25, 2008 6:32 pm
- Tag: I wish I knew as much as I think I know.
- Location: Kentucky
Re: Porsche 356A Front Low or High Overrider Bar Determinati
If you have one to measure against then measure from the furthest point on the end of the two bars to the hole for the fastener to the bumper guard. In the case of the high guard it will be a significant increase in the dimension.
If I had known I would live this long I would have pushed the envelope a little harder.
Cymru am byth
David Jones #9715
Cymru am byth
David Jones #9715
-
- 356 Fan
- Posts: 4205
- Joined: Tue Mar 25, 2008 9:28 pm
Re: Porsche 356A Front Low or High Overrider Bar Determinati
Riddle -- you will find the answer when you measure the distance between the studs in your bumper guards.
- Al Zim
- 356 Fan
- Posts: 4309
- Joined: Thu Mar 27, 2008 12:37 pm
- Location: FT.WORTH/DALLAS TEXAS
- Contact:
Re: Porsche 356A Front Low or High Overrider Bar Determinati
Check your parts book it will give you a serial number for the change. Another interesting change occurred at that time can anyone tell me what it is.? al zim
Last edited by Al Zim on Wed Jan 03, 2018 3:00 pm, edited 2 times in total.
www.allzim.com
356 Parts and Services
www.facebook.com/ZimsAuto/
www.instagram.com/zims_autotechnik/
356 Parts and Services
www.facebook.com/ZimsAuto/
www.instagram.com/zims_autotechnik/
-
- 356 Fan
- Posts: 64
- Joined: Sat Apr 26, 2008 12:19 am
- Location: Livermore, CA
Re: Porsche 356A Front Low or High Overrider Bar Determinati
The overrider bar is apparently a low. I measured total length at 68" and bumper mounts at 30 1/2. The measurements are exactly the same as the low on my early 59 Cabriolet. Thanks for everyone's help. I really do appreciate this forum and the people in it!
Sincerely,
Charlie Bennett
Sincerely,
Charlie Bennett