Gebi Bolts
-
- 356 Fan
- Posts: 3
- Joined: Thu Sep 01, 2016 10:07 pm
- Location: Dayton, OH
Gebi Bolts
I can't find any reference to Gebi hardware on the forum. I've found a few so far used on my '64 356C as link pin pinch bolts and tie rod clamp bolts. I have found some references over on The Samba site. Anyone else seen these bolts on their 356?
-
- 356 Fan
- Posts: 4207
- Joined: Tue Mar 25, 2008 9:28 pm
Re: Gebi Bolts
GEBI has been around since 1885 and still going -- see http://bierbach-gmbh.de/englisch/company.php
- Martin Benade
- 356 Fan
- Posts: 12388
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: Gebi Bolts
Has anyone else found their bolts on a 356? I have not heard of that brand myself.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
-
- 356 Fan
- Posts: 3
- Joined: Thu Sep 01, 2016 10:07 pm
- Location: Dayton, OH
Re: Gebi Bolts
I've also found some NEDUR 8G bolts used on the rear torsion bar bushing cover.
-
- 356 Fan
- Posts: 4207
- Joined: Tue Mar 25, 2008 9:28 pm
Re: Gebi Bolts
Company that once used trademark NEDUR is Koninklijke Nedschroef Holding B.V., in the Netherlands. See their website: https://www.nedschroef.com/en/about_nedschroef/history/
-
- 356 Fan
- Posts: 1805
- Joined: Thu Oct 15, 2009 11:06 pm
- Location: Vista, CA
Re: Gebi Bolts
It's not a brand that I see often, especially on a 356.
I was searching through my photos for other reasons, and found this- a 935 transmission that I rebuilt recently...
I was searching through my photos for other reasons, and found this- a 935 transmission that I rebuilt recently...
Jon Bunin
-
- 356 Fan
- Posts: 477
- Joined: Sat May 17, 2008 3:05 pm
Re: Gebi Bolts
My windshield wiper mechanism (356 T2) has Gebi bolts:
Last edited by Etienne Kerkhoffs on Tue Jul 11, 2017 12:43 pm, edited 1 time in total.
Etienne Kerkhoffs
1958 356A T2 Sunroof Coupe
1958 356A T2 Sunroof Coupe
- Charles H Jacobus
- 356 Fan
- Posts: 493
- Joined: Wed May 28, 2014 5:02 pm
- Location: Dallas, TX
Re: Gebi Bolts
Jon:
The quality of the wire raps on those safety wired bolts looks like you might have been an aircraft mechanic, nice!
ChuckJ
The quality of the wire raps on those safety wired bolts looks like you might have been an aircraft mechanic, nice!
ChuckJ
Current:
2012 Silver 991
1995 Midnight blue 993
1965 Red 356C
Past:
Fond memories of 14 others (including a '63 Normal and a 61 S90)
2012 Silver 991
1995 Midnight blue 993
1965 Red 356C
Past:
Fond memories of 14 others (including a '63 Normal and a 61 S90)
-
- 356 Fan
- Posts: 1805
- Joined: Thu Oct 15, 2009 11:06 pm
- Location: Vista, CA
Re: Gebi Bolts
Thank you Chuck. I've worked on various things with wings, but nothing designed to leave the ground.
Jon Bunin
- Wes Bender
- 356 Fan
- Posts: 4940
- Joined: Wed Aug 27, 2008 10:54 am
- Location: Somewhere in the Gadsden Purchase, USA
Re: Gebi Bolts
+1 Jon. Safety wiring like that is a sign of attention to detail.
Some days it's just not worth chewing through the restraints.....