Trying to source correct garnish rail sheet metal phylipps s

For those who obsess about exactly how their 356 left the factory!
Post Reply
Message
Author
User avatar
Steve Raucher
356 Fan
Posts: 770
Joined: Sat Jan 09, 2010 9:58 am
Location: Seaside CA 93955

Trying to source correct garnish rail sheet metal phylipps s

#1 Post by Steve Raucher »

I got these small screws from Auto's Int'l. For top door garnish rail Speedster. My screws are wider and longer. about 5mm in size, sheet metal have a hard time sourcing four Phillips head screws.
Any suggestions on a vendor where I can get these?
Thank you,
Steve
Attachments
IMG_3205.JPG
IMG_3204.JPG
 

Jeffrey Leeds
356 Fan
Posts: 1280
Joined: Sun Apr 20, 2008 4:57 pm
Location: Northeastern MA

Re: Trying to source correct garnish rail sheet metal phylip

#2 Post by Jeffrey Leeds »

You might find what you are looking for here at Belmertic:

https://www.belmetric.com/39mm-c-10_97_100/
< Jeff >

Registry Member Since 1978
1963 356B T-6 Super 90 Coupe
2009 997.2 Carrera S
2015 958 Cayenne diesel-1 & 2015 958 Cayenne diesel-2

User avatar
Martin Benade
356 Fan
Posts: 12186
Joined: Wed Nov 23, 2011 10:52 am
Location: Cleveland, Ohio

Re: Trying to source correct garnish rail sheet metal phylip

#3 Post by Martin Benade »

Stoddard doesn't have them? They probably do, in stainless.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna

User avatar
Steve Raucher
356 Fan
Posts: 770
Joined: Sat Jan 09, 2010 9:58 am
Location: Seaside CA 93955

Re: Trying to source correct garnish rail sheet metal phylip

#4 Post by Steve Raucher »

Thanks Jeff and Martin,
Stoddard says Porsche has no part # for such item .
I remembered there's a great place not far from my home.
They have a great selection of all things metric; nuts,bolts,screws and much more.
Global Metric in Belmont,CA # 650 592-2722.
 

Post Reply