Hi all.
Did the front seats of the 912 hinge forward diagonally towards the center to allow easier access to the rear? Don't have a 912 car here, but apparently have 2off 912 seats.
Cheers Jay
912 seats
- John Clarke
- 356 Fan
- Posts: 2115
- Joined: Wed Aug 27, 2008 6:38 am
- Location: East Sussex, England
- Contact:
- Sebastian Gaeta
- 356 Fan
- Posts: 3055
- Joined: Tue Mar 25, 2008 5:50 pm
- Location: Ann Arbor, MI
Re: 912 seats
Nope. Would love to see pics of what you've got!
Sebastian Gaeta
www.arbormotion.com
Registry #8339
'65 C coupe
'64 C cab
-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle
www.arbormotion.com
Registry #8339
'65 C coupe
'64 C cab
-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle
- John Brooks
- 356 Fan
- Posts: 2168
- Joined: Tue Jul 08, 2008 11:50 am
- Location: Whidbey Island WA.
- Contact:
Re: 912 seats
I have a 66 912, and 356B. The difference is only in the j-hook seat back lock release, and the seat rails. The 912 lower slide rails stay with the seats, so you can't slide them off the front of rails. The back release is a single on the right seat, and none on the left. The fold pivot point and back adjustment is the same through 68. Both seats will fit, there are not too many differences.
John Brooks
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
- Sebastian Gaeta
- 356 Fan
- Posts: 3055
- Joined: Tue Mar 25, 2008 5:50 pm
- Location: Ann Arbor, MI
Re: 912 seats
John,John Brooks wrote:Both seats will fit, there are not too many differences.
I am 99.99999999999999999% sure they will not fit in a 356 as the seat rails are different widths apart, with the 911/912 seats having a wider width between the rails than the 356.
Sebastian Gaeta
www.arbormotion.com
Registry #8339
'65 C coupe
'64 C cab
-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle
www.arbormotion.com
Registry #8339
'65 C coupe
'64 C cab
-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle
- Martin Benade
- 356 Fan
- Posts: 12345
- Joined: Wed Nov 23, 2011 10:52 am
- Location: Cleveland, Ohio
Re: 912 seats
I can add that other percentage portion, they are too wide for a 356, but otherwise look very similar. Also I thought they did slide off the rails like a 356.
Cleveland Ohio
62 Cabriolet
56 VW
02 IS 300
04 Sienna
62 Cabriolet
56 VW
02 IS 300
04 Sienna
- John Brooks
- 356 Fan
- Posts: 2168
- Joined: Tue Jul 08, 2008 11:50 am
- Location: Whidbey Island WA.
- Contact:
Re: 912 seats
I apologize, Sebastian is absolutely correct.
The 356 rails are ~450mm apart the 912 is ~490mm. The 912 mount rails are 1mm wider. I need to go look closer before posting.
I have a few sets of seats left from the late 60's. It seams I have mixed the bottoms and backs some time in the past. I have a B bottom with 68 911 headrest backs. It worked, I have always thought they were the same. Having never paid too much attention, the seats backs were split to box them in a move and I must have them mixed up. Black vinyl looks the same. they all have slightly different fold releases, but the same recliner pivot. I had always considered them the same. THEY ARE NOT.
I am glad this came up, since I have the 912 in an interior replacement at this time, I may have those bottoms reversed on the original 912 seats. I will go measure the "original 912 seats" at the upholstery shop tomorrow.
Sebastian, thank you for your correction, I would hate to waste a Spinney Beck woven hide on the wrong seat bottoms for the 912. Its a good catch. I just wished I have tagged all this spare stuff when I pulled it.
The 356 rails are ~450mm apart the 912 is ~490mm. The 912 mount rails are 1mm wider. I need to go look closer before posting.
I have a few sets of seats left from the late 60's. It seams I have mixed the bottoms and backs some time in the past. I have a B bottom with 68 911 headrest backs. It worked, I have always thought they were the same. Having never paid too much attention, the seats backs were split to box them in a move and I must have them mixed up. Black vinyl looks the same. they all have slightly different fold releases, but the same recliner pivot. I had always considered them the same. THEY ARE NOT.
I am glad this came up, since I have the 912 in an interior replacement at this time, I may have those bottoms reversed on the original 912 seats. I will go measure the "original 912 seats" at the upholstery shop tomorrow.
Sebastian, thank you for your correction, I would hate to waste a Spinney Beck woven hide on the wrong seat bottoms for the 912. Its a good catch. I just wished I have tagged all this spare stuff when I pulled it.
John Brooks
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
- Sebastian Gaeta
- 356 Fan
- Posts: 3055
- Joined: Tue Mar 25, 2008 5:50 pm
- Location: Ann Arbor, MI
Re: 912 seats
Hi John,
To me what is great about this forum is that the collective knowledge means we get our facts double, triple and quadruple checked so even a youngin' like me can chime in once in a while with some info. My goal in life is to enjoy these cars for 52 years or more just like you but I've still got a ways to go to catch up!
To me what is great about this forum is that the collective knowledge means we get our facts double, triple and quadruple checked so even a youngin' like me can chime in once in a while with some info. My goal in life is to enjoy these cars for 52 years or more just like you but I've still got a ways to go to catch up!
Sebastian Gaeta
www.arbormotion.com
Registry #8339
'65 C coupe
'64 C cab
-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle
www.arbormotion.com
Registry #8339
'65 C coupe
'64 C cab
-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle
-
- 356 Fan
- Posts: 1898
- Joined: Sat Jun 21, 2008 11:16 am
- Location: Santa Monica, CA
Re: 912 seats
You can use 911 seats in a 356. You just have to install the seat rails differently. I can't remember the details; you either flip them around or install them left to right and vice versa.
I know it can be done because when I bought my '62 car it had early 911 sport seats installed that way.
Edit: Seat rails meaning the metal pieces which attach to the floor, not the rails (tracks) which attach to the seat.
I know it can be done because when I bought my '62 car it had early 911 sport seats installed that way.
Edit: Seat rails meaning the metal pieces which attach to the floor, not the rails (tracks) which attach to the seat.
#6386