Does anyone recognize this part
-
- 356 Fan
- Posts: 31
- Joined: Tue Apr 02, 2013 10:42 pm
- Location: NJ
Does anyone recognize this part
Does anyone recognize this part? It looks like a interior stainless steel door garnish. I have no idea
-
- 356 Fan
- Posts: 2506
- Joined: Thu Mar 27, 2008 9:14 am
- Tag: Official curmudgeon
- Location: Ft Collins CO
Re: Does anyone recognize this part
Robert,
I don't recognize it for a 356.
It could be a rear garnish molding for an early 911 65-71.
But stainless steel?
It also could be a left rear door molding from a Studebaker.
norm
I don't recognize it for a 356.
It could be a rear garnish molding for an early 911 65-71.
But stainless steel?
It also could be a left rear door molding from a Studebaker.
norm
-
- 356 Fan
- Posts: 31
- Joined: Tue Apr 02, 2013 10:42 pm
- Location: NJ
Re: Does anyone recognize this part
Norm,
Thanks I got them when I purchased my 356c 30 years ago. I had no idea where they came from
Robert
Thanks I got them when I purchased my 356c 30 years ago. I had no idea where they came from
Robert
- Walt Nolte
- 356 Fan
- Posts: 205
- Joined: Sat Apr 26, 2008 5:41 pm
- Location: Mountain States
Re: Does anyone recognize this part
My 59 Coupe has had stainless steel garnish rails since I purchased in 1972. No idea if original, probably not. See pictures, one from the mid 70s and the other about five years ago. As I am 800 miles from car, I cannot get better pictures to show the interior, but if you look closely, the garnish rails can be seen under the quarter windows.
Walt Nolte
1959 A Coupe
Montana/ Colorado
Walt Nolte
1959 A Coupe
Montana/ Colorado
walt nolte
-
- 356 Fan
- Posts: 50
- Joined: Thu Mar 31, 2016 10:53 pm
Re: Does anyone recognize this part
looks to be the deflector trim on the doors, should have 3 countersunk holes in it. Chromed brass.
Not 100% sure though.
Not 100% sure though.
- Jules Dielen
- 356 Fan
- Posts: 3206
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: Does anyone recognize this part
a 24" deflector trim? doubtful. Not sure that is a 356 part, too short for a garnish rail. is it really stainless? does a magnet stick to it?Kevin Whitehead wrote:looks to be the deflector trim on the doors, should have 3 countersunk holes in it. Chromed brass.
Not 100% sure though.
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.
-
- 356 Fan
- Posts: 31
- Joined: Tue Apr 02, 2013 10:42 pm
- Location: NJ
Re: Does anyone recognize this part
Jules,
It is stainless steel!
Robert
It is stainless steel!
Robert
- Jules Dielen
- 356 Fan
- Posts: 3206
- Joined: Fri Mar 28, 2008 3:25 pm
- Location: Arizona
Re: Does anyone recognize this part
my bet would be it is not a 356 part.
Jules
Water pumps are for windshield washers only.
Water pumps are for windshield washers only.