Front Rubber Brake Line Source for 1953
- David Green
- 356 Fan
- Posts: 224
- Joined: Thu Dec 06, 2012 3:48 pm
- Location: Santa Barbara
Front Rubber Brake Line Source for 1953
I ordered a set of front and rear replacement rubber brake lines from Stoddard and they sent me 4 of the rears telling me that Pre-A fronts are no longer available and their recommended substitute is to use the rears on the front. This is clearly a bad idea as it requires a big loop that will likely hit the suspension and thus not safe. My old fronts are approximately 345mm and the new rears are 560mm (photo). They list a front pn 644.42.311 but when I called my regular rep he checked and told me that it's for later cars and is too short for Pre-As: hard to understand there's a line shorter than 345mm, but that's the info I have.
Anyone have a source and part number for proper length fronts?
Thanks,
David
Anyone have a source and part number for proper length fronts?
Thanks,
David
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
- John Brooks
- 356 Fan
- Posts: 2170
- Joined: Tue Jul 08, 2008 11:50 am
- Location: Whidbey Island WA.
- Contact:
Re: Front Rubber Brake Line Source for 1953
Try these guys, measure the old hose and ask them to make it. They got old tooling, some patents and drawings from the fatherland a few years ago. I bought a set a couple years back. The hose was ATE and the fittings were DIN. Worked for me. Easy group,to work with they can make any hose.
JCT-HQ-Brakes
1878 Quilmes, Provincia de Buenos Aires , Argentina
http://www.ebay.com/sch/kaiserlyon/m.ht ... 7675.l2562
JCT-HQ-Brakes
1878 Quilmes, Provincia de Buenos Aires , Argentina
http://www.ebay.com/sch/kaiserlyon/m.ht ... 7675.l2562
John Brooks
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
62 Roadster
66 912
84 Cab
getting pushed around in porsches since 1965
- Alan Hall
- 356 Fan
- Posts: 1462
- Joined: Wed Mar 26, 2008 12:06 pm
- Location: Orinda, CA
Re: Front Rubber Brake Line Source for 1953
As I recall pre-A front brake lines are the same length as Karmann Ghia front lines from some year range. Unfortunately I don't recall what years but I believe there are only two versions of KG lines so it should be fairly easy to find out which ones you need.
-
- 356 Fan
- Posts: 440
- Joined: Sun Jul 18, 2010 8:33 am
- Location: United Kingdom
Re: Front Rubber Brake Line Source for 1953
Hello, I got mine a while ago from http://www.hansmotors.co.uk/productsandsuppliers.html, I believe they were the original importers for ATE stuff into the UK back in the day, great to deal with. I know they are based in the UK but there's always Royal Mail.
V. Gillespie
- Jim Karaba
- 356 Fan
- Posts: 1027
- Joined: Sun Feb 22, 2009 12:34 am
- Location: Lafayette, LA
Re: Front Rubber Brake Line Source for 1953
http://www2.cip1.com/ProductDetails.asp ... -611-701-B
VW parts will work for this just fine.
VW parts will work for this just fine.
- David Green
- 356 Fan
- Posts: 224
- Joined: Thu Dec 06, 2012 3:48 pm
- Location: Santa Barbara
Re: Front Rubber Brake Line Source for 1953
Thanks everyone for the suggestions.
For future reference, Stoddard measured their front rubber hose part number 644.42.311 and it's 380mm (15"). Sierra Madre's same part number is 410mm (16")
Jim - thanks for the link to the proper hose. I just ordered two.
David
For future reference, Stoddard measured their front rubber hose part number 644.42.311 and it's 380mm (15"). Sierra Madre's same part number is 410mm (16")
Jim - thanks for the link to the proper hose. I just ordered two.
David
-
- 356 Fan
- Posts: 126
- Joined: Tue Apr 01, 2008 10:19 am
- Location: Lakeway, TX, USA
Re: Front Rubber Brake Line Source for 1953
So, what would be the vw substitute for the rears?
Ignacio
Ignacio
Ignacio Vivancos
Lakeway TX
56 A
69 911 T SWT
77 carrera 3.0
89 964 C4
Lakeway TX
56 A
69 911 T SWT
77 carrera 3.0
89 964 C4
- David Green
- 356 Fan
- Posts: 224
- Joined: Thu Dec 06, 2012 3:48 pm
- Location: Santa Barbara
Re: Front Rubber Brake Line Source for 1953
My rear brake hoses are 560 mm = 22" and don't see hoses close to this length listed on the EIS VW Supply website:
http://www.eisparts.com/Merchant2/merchant.mvc?
David
http://www.eisparts.com/Merchant2/merchant.mvc?
David
-
- 356 Fan
- Posts: 4207
- Joined: Tue Mar 25, 2008 9:28 pm
Re: Front Rubber Brake Line Source for 1953
In the case of ATE -brand hoses, you will find the length as part of the ATE number stamped on the metal end. For that matter, most ATE part numbers have a size/length as part of their part number.
Here's a link to the ATE classic catalog for Porsche. http://www.ate-brakes.com/media/2826/at ... orsche.pdf hunt down for a list by Porsche part number = ATE part number and look for the various lengths within the ATE number. Of course, if you think a VW part would have a better length, then load the VW and look around.
Here's a link to the ATE classic catalog for Porsche. http://www.ate-brakes.com/media/2826/at ... orsche.pdf hunt down for a list by Porsche part number = ATE part number and look for the various lengths within the ATE number. Of course, if you think a VW part would have a better length, then load the VW and look around.
- Alan Hall
- 356 Fan
- Posts: 1462
- Joined: Wed Mar 26, 2008 12:06 pm
- Location: Orinda, CA
Re: Front Rubber Brake Line Source for 1953
I notice the ATE catalog does not list a front hose for pre-A. Earliest hose they show is for 356A starting 1/56.
-
- 356 Fan
- Posts: 4207
- Joined: Tue Mar 25, 2008 9:28 pm
Re: Front Rubber Brake Line Source for 1953
Keep scrolling down on that ATE listing for a listing by ATE number, then look for where you see 345 within the number. It may say BMW, or something. Then go to the BMW listing to find what model BMW so you can buy the part.
Note: how the length is measured in the drawing above -- not the overall length!
Note: how the length is measured in the drawing above -- not the overall length!