window washer clamp
-
- 356 Fan
- Posts: 225
- Joined: Fri Jan 06, 2012 10:51 am
- Location: Eagle Idaho/Dillingham Alaska
window washer clamp
Does any one have a pic of the clamp that holds the washer mechanism to the steering wheel shaft on a 54 ,or were to find one ? Thanks
1954 coup
1959 Cab
1959 super coup
1970 240z first year
1971 240z
1959 Cab
1959 super coup
1970 240z first year
1971 240z
- James Davies
- 356Talk Moderator
- Posts: 2959
- Joined: Thu Aug 15, 2013 9:15 am
- Location: Heidelberg, DE
Re: window washer clamp
Hi Alfred,
It gets clamped to the defroster tube. Here's a photo of the one from my July 1953 coupe. It's basically two muffler clamps (of different diameter) welded together.
Contact Rick Albro. He's a registry member.
Also, which pump do you have?
It gets clamped to the defroster tube. Here's a photo of the one from my July 1953 coupe. It's basically two muffler clamps (of different diameter) welded together.
Contact Rick Albro. He's a registry member.
Also, which pump do you have?
-
- 356 Fan
- Posts: 225
- Joined: Fri Jan 06, 2012 10:51 am
- Location: Eagle Idaho/Dillingham Alaska
Re: window washer clamp
Thanks James, I am not were the car is at this time, Up in Alaska for the next three weeks. But I can build that clamp, Just needed to see one. Not sure I have the right pump for the 54, I will look at the pump when I get back. Thanks Al an yes its is a cool -20 today
1954 coup
1959 Cab
1959 super coup
1970 240z first year
1971 240z
1959 Cab
1959 super coup
1970 240z first year
1971 240z
- James Davies
- 356Talk Moderator
- Posts: 2959
- Joined: Thu Aug 15, 2013 9:15 am
- Location: Heidelberg, DE
Re: window washer clamp
Alaska! Fantastic! Good luck with the build. Contact Rick Albro if you need some tips.
- Rick Albro
- 356 Fan
- Posts: 330
- Joined: Thu Mar 27, 2008 12:57 am
Re: window washer clamp
Thanks James! Alfred some of the washer pumps had a spacer depending on weather you have the barrel shaped or the cylinder shaped pump. I think the same bracket was used but the barrel shaped pumps needed a bit more diameter... James did a great job of documenting the various pumps in the linked post. James makes a good point the housing for James pump was made exactly the same as the housing for my pump. The diameters are the same to with in my ability to measure. The brackets when drawn tight would therefor be comparable. James' bracket does not need the spacer but my bracket does have a spacer. Both cars are 53 model years. Pre A cars indeed have many fine details!
Last edited by Rick Albro on Sun Sep 03, 2017 12:06 pm, edited 1 time in total.
- James Davies
- 356Talk Moderator
- Posts: 2959
- Joined: Thu Aug 15, 2013 9:15 am
- Location: Heidelberg, DE
Re: window washer clamp
To add one more wrinkle, the original bracket from my car is actually sized exactly for the barrel pump used in 1953. Here's a photo showing the perfect fit.
Rick restored the pump for me - remade the barrel-shaped housing - and did a tremendous job!
Rick restored the pump for me - remade the barrel-shaped housing - and did a tremendous job!