'60 Cab project

Share progress on your 356 related project or full restoration with others!
Post Reply
Message
Author
User avatar
Jim Nelson
356 Fan
Posts: 2138
Joined: Wed Mar 26, 2008 2:18 pm
Location: SoCal

'60 Cab project

#1 Post by Jim Nelson »

Nothing like a new project. My partners (Mike Benson and Larry Markham) and I had been searching for months to find a car that had a solid foundation at the right price, and we've gone from California to Nebraska to look. Finally have found a great car right in our own backyard (almost). We didn't want to get into a car that needed a lot of metalwork, so that's a tall order right there. Looking at cars in primer or paint doesn't let you know what's underneath the primer. What we found was a car that had been a long-time project car that had 98% of the metalwork done, we just need to clean up the gaps a very small bit. If it was just a driver, the gaps would be great, but we want to go the extra mile here to make a really superlative car. Total basket case.
s-l1600.jpg
(The grey around the headlights and doors is lead)

The good news is the prior owner saved every nut and bolt, as well as the bits you need that you can't buy.
A huge plus for originality. The bad news is, everything needs to be restored. The very good news is the metalwork was done by a fellow who did a car in the Porsche Museum, and he really did nice work. Lots of new sheet metal; underneath, it's a new car with a bit of surface rust, largely from sitting fairly close to the ocean.
s-l1600-5.jpg
s-l1600-9.jpg
s-l1600-8.jpg
s-l1600-10.jpg
Last edited by Jim Nelson on Sun Feb 21, 2016 1:40 pm, edited 1 time in total.

User avatar
Jim Nelson
356 Fan
Posts: 2138
Joined: Wed Mar 26, 2008 2:18 pm
Location: SoCal

Re: '60 Cab project

#2 Post by Jim Nelson »

You have to start somewhere, so collecting all the bits that the prior owner had and moving them was the first order of the day. Sorting and getting like things together takes time.

Mechanically, we've started here:
IMG_0860.JPG
IMG_0859.JPG
Looks like we had guests:
IMG_0864.JPG
But we know things are straight:
IMG_0866.JPG
which is a good start.

User avatar
Dan Kalinski
356 Fan
Posts: 774
Joined: Thu Mar 26, 2009 2:26 am
Location: Pacific Northwest

Re: '60 Cab project

#3 Post by Dan Kalinski »

Nice find, Jim!

Your find was in my back yard and based on the license plate, out of Skagit County. None the less, a great project and did it come with the hard top too?

Trust this will be a fun project and an interesting read as the project moves along.

User avatar
Jim Nelson
356 Fan
Posts: 2138
Joined: Wed Mar 26, 2008 2:18 pm
Location: SoCal

Re: '60 Cab project

#4 Post by Jim Nelson »

The transmission assembly was really covered with gunk and sawdust.
IMG_0880.JPG
IMG_0881.JPG
IMG_0882.JPG
The splines were a bit loose, so we'll have new ones installed. Likewise, one of the axles had runout that was a touch beyond factory spec, so that'll go as well, and we haven't checked the splines on the remaining axle yet.
IMG_0885.JPG
IMG_0883.JPG
The trans had updated R&P bolts, so someone had visited before, but we'll go through this as well. Nice to know it's got the original trans, though.
IMG_0890.JPG
IMG_0891.JPG
The seats were fun to take apart.
IMG_0914.JPG
(feeling good that I haven't broken anything...not everything was happy coming apart)
IMG_0915.JPG
So we're at the point where we have a box to go to the chrome plater, a box for the powder coater, and a box for the cad/black oxide plater. Nothing is ready to go yet, because getting some of the parts like door locks and ignition switches apart is delicate. Larry's expertise is encyclopedic.

User avatar
Jim Nelson
356 Fan
Posts: 2138
Joined: Wed Mar 26, 2008 2:18 pm
Location: SoCal

Re: '60 Cab project

#5 Post by Jim Nelson »

Tomorrow the car heads to the walnut blaster to have the rust removed.
We keep finding interesting little details. Not only does the deck lid have the last three digits of the VIN, but there's another interesting mark as well, looks like "E" and something...
IMG_0899.jpg
IMG_0898.jpg
Last edited by Jim Nelson on Sun Feb 21, 2016 2:19 pm, edited 2 times in total.

User avatar
Jim Nelson
356 Fan
Posts: 2138
Joined: Wed Mar 26, 2008 2:18 pm
Location: SoCal

Re: '60 Cab project

#6 Post by Jim Nelson »

Dan Kalinski wrote:Nice find, Jim!

Your find was in my back yard and based on the license plate, out of Skagit County. None the less, a great project and did it come with the hard top too?

Trust this will be a fun project and an interesting read as the project moves along.
Actually, Dan, the car was originally a Washington car, but the PO moved south of LA a number of years ago. We did get the hard top as well, but the Kardex doesn't mention it at all, and Porsche says they don't think it came with one. We do have a soft top frame, though, so we'll likely go with that. Originally, the car was Ivory with a black interior, and the seats had grey corduroy inserts. So that's what we'll dress it up as.

ryan base
356 Fan
Posts: 236
Joined: Wed Jan 26, 2011 12:30 am
Location: salton city

Re: '60 Cab project

#7 Post by ryan base »

team effort? no doubt that will help you work through your details. share your progress often and the trouble spots that hang you up, looks like a great start. thanks for posting

User avatar
Jim Nelson
356 Fan
Posts: 2138
Joined: Wed Mar 26, 2008 2:18 pm
Location: SoCal

Re: '60 Cab project

#8 Post by Jim Nelson »

Progress continues. Brake backing plates turned out to be very nice under the gunk.
IMG_0944.JPG
Larry's deft touch has turned the hood hinges from "needing a little help" to "works very nicely"...
IMG_0947.JPG
More pieces for the "chrome box"...
IMG_0945.JPG
And we ran into our first little snag. Since we know the PO bought this as a project, at some point a very long time ago a Turkey was involved. Instead of using the bronze Porsche bushings, he used the grey metal VW ones, which are close, but no cigar. The wear rate of the VW piece (or maybe lack of maintenance) has caused us to rethink using the C links that the spindle fits into. Thankfully, we've located a pair, and they've cleaned up nicely.
IMG_0946.JPG
IMG_0949.JPG
The biggest issue was that the slop in the assembly has caused excess wear (the one on the left).
IMG_0954.JPG
It's really nice to have the factory tools. Makes things a whole lot easier.
IMG_0950.JPG
Also nice when the spindles turn out to be straight, no surprises.
IMG_0951.JPG
Attachments
IMG_0952.JPG

User avatar
Jim Nelson
356 Fan
Posts: 2138
Joined: Wed Mar 26, 2008 2:18 pm
Location: SoCal

Re: '60 Cab project

#9 Post by Jim Nelson »

More Turkey: the bearing races look like they've been in a vise. Sigh... We'll replace them.
IMG_0956.JPG
At the end of the day, things are shaping up nicely. We'll remove that little tube that the speedometer cable goes into to replace the o-ring.
IMG_0957.JPG

User avatar
Matthew Devereux
356 Fan
Posts: 1047
Joined: Sun Nov 21, 2010 11:36 am
Location: Alberta

Re: '60 Cab project

#10 Post by Matthew Devereux »

I bid on that car. You got to work quickly.
Matthew Devereux
'00 Boxster S
'58 356A coupe

User avatar
Jim Nelson
356 Fan
Posts: 2138
Joined: Wed Mar 26, 2008 2:18 pm
Location: SoCal

Re: '60 Cab project

#11 Post by Jim Nelson »

Well, it was close, about 120 miles away, and we took a couple of trips to gather bits. Bear in mind it was almost completely apart to start with. After that it was just getting down to it methodically. More pictures tomorrow.

User avatar
Jim Nelson
356 Fan
Posts: 2138
Joined: Wed Mar 26, 2008 2:18 pm
Location: SoCal

Re: '60 Cab project

#12 Post by Jim Nelson »

Fortune smiles occasionally; we caught the blaster in a lull; he got us right in.
Monday:
IMG_3287.JPG
IMG_0942.JPG

Today:
IMG_0958.JPG
IMG_0961.JPG
IMG_0959.JPG
A pretty good starting point. Off to the painter for a quick coat of epoxy primer.

User avatar
Dan Kalinski
356 Fan
Posts: 774
Joined: Thu Mar 26, 2009 2:26 am
Location: Pacific Northwest

Re: '60 Cab project

#13 Post by Dan Kalinski »

Great progress. Factory tools...... Very convenient!

User avatar
Jim Nelson
356 Fan
Posts: 2138
Joined: Wed Mar 26, 2008 2:18 pm
Location: SoCal

Re: '60 Cab project

#14 Post by Jim Nelson »

This is a personal record for me for a project car, from drop-off at the blasters to in the trailer headed home, four days. I'm sure the rest of the job won't go like this, it just doesn't go this fast. Extremely lucky to find a gap at both shops at the same time.

It's not the Mona Lisa, but it's not intended to be; lots of little fiddling to make it right coming up.
IMG_0969.JPG
IMG_0970.JPG

User avatar
Doug McDonnell
356 Fan
Posts: 6061
Joined: Sat Apr 05, 2008 8:21 am
Location: Augusta,Michigan

Re: '60 Cab project

#15 Post by Doug McDonnell »

You are making everyone in the East and Midwest who has done a project car very jealous. Good Bones!
1965 356C 2000 BMW 740i Sport 1967 Honda CL77 There is never enough time to do it right, but always enough time to do it over.

Post Reply