WCSTA -14- 152004 T2 1959 Cab
-
- 356 Fan
- Posts: 225
- Joined: Fri Jan 06, 2012 10:51 am
- Location: Eagle Idaho/Dillingham Alaska
WCSTA -14- 152004 T2 1959 Cab
I found it in a car lot in Eastern Washington. You can see the car lot. a totaled insurance car' it had rolled down a hill and hit a parked car in 1976 been parked John the guy that owned it was sure he was going to get around it fixing it up. So it was not for sale at any price. Took me two years to get it from him. He wanted to buy a 37 chev and need money. The only thing that keep it from turning in to a Big V when I pulled it on to the trailer was the heating tubes.
- Attachments
Last edited by Alfred Knittel on Sat Apr 04, 2015 2:12 pm, edited 1 time in total.
1954 coup
1959 Cab
1959 super coup
1970 240z first year
1971 240z
1959 Cab
1959 super coup
1970 240z first year
1971 240z
- Greg Bryan
- 356 Fan
- Posts: 3696
- Joined: Sat Oct 04, 2008 1:05 pm
- Location: San Pedro, CA 90732; Fallen Leaf, CA 96150
- Contact:
-
- 356 Fan
- Posts: 116
- Joined: Sat Feb 14, 2015 12:23 pm
-
- 356 Fan
- Posts: 225
- Joined: Fri Jan 06, 2012 10:51 am
- Location: Eagle Idaho/Dillingham Alaska
Re: WCSTA -14- 152004 T2 1959 Cab
well I didn't make the short list on the wcsta so a have move on with the project boy do that cost a lot
1954 coup
1959 Cab
1959 super coup
1970 240z first year
1971 240z
1959 Cab
1959 super coup
1970 240z first year
1971 240z
-
- 356 Fan
- Posts: 225
- Joined: Fri Jan 06, 2012 10:51 am
- Location: Eagle Idaho/Dillingham Alaska
Re: WCSTA -14- 152004 T2 1959 Cab
have got the 54 on the road still working out the bugs next the 59 cab metal work done motor all most done wiring harness pull in
1954 coup
1959 Cab
1959 super coup
1970 240z first year
1971 240z
1959 Cab
1959 super coup
1970 240z first year
1971 240z
-
- 356 Fan
- Posts: 225
- Joined: Fri Jan 06, 2012 10:51 am
- Location: Eagle Idaho/Dillingham Alaska
Re: WCSTA -14- 152004 T2 1959 Cab
Fast foreword about year, lot of things have gone on with the car project. The engine rebuild is about complete. Body work done, pulled in new wires, rebuilt front end, new brake system, finely put it on a rotisserie, scraping underside getting ready to finish that up. then off to the painters. May take six or seven months to get rest done. been putting a lot of time on it and it shows
1954 coup
1959 Cab
1959 super coup
1970 240z first year
1971 240z
1959 Cab
1959 super coup
1970 240z first year
1971 240z
-
- 356 Fan
- Posts: 225
- Joined: Fri Jan 06, 2012 10:51 am
- Location: Eagle Idaho/Dillingham Alaska
Re: WCSTA -14- 152004 T2 1959 Cab
A lot has been done from the last post. The motor has been rebuilt and ready to install. Trany is been rebuilt right now. I have finished the under coating. Sent the hard top off to the painter { ruby Red}. Finishing the sound deading. Front end is all rebuilt, new wireing brake are done. what a lot work. Starter to pull in fuel line, Emg brake wires clutch cable , heat wires brake lines Still have a long road to on it. One step at a time it mite get done one of these days.ha
1954 coup
1959 Cab
1959 super coup
1970 240z first year
1971 240z
1959 Cab
1959 super coup
1970 240z first year
1971 240z
-
- 356 Fan
- Posts: 225
- Joined: Fri Jan 06, 2012 10:51 am
- Location: Eagle Idaho/Dillingham Alaska
Re: WCSTA -14- 152004 T2 1959 Cab
The project is moving. But ever so slowly. Got the transmission installed but having problems with it not locking in the wheels when in gear. not sure why. The transmission seems to go in to gear but the wheels spin freely, need to figure it before I install the motor.
1954 coup
1959 Cab
1959 super coup
1970 240z first year
1971 240z
1959 Cab
1959 super coup
1970 240z first year
1971 240z
- Vic Skirmants
- Registry Hall of Fame
- Posts: 9300
- Joined: Tue Oct 27, 2009 5:02 pm
- Location: SE Michigan
- Contact:
Re: WCSTA -14- 152004 T2 1959 Cab
Are you spinning one wheel and the other one turns in the opposite direction? That is how the differential works.Alfred Knittel wrote:The project is moving. But ever so slowly. Got the transmission installed but having problems with it not locking in the wheels when in gear. not sure why. The transmission seems to go in to gear but the wheels spin freely, need to figure it before I install the motor.
How are you keeping the input shaft from turning?
-
- 356 Fan
- Posts: 225
- Joined: Fri Jan 06, 2012 10:51 am
- Location: Eagle Idaho/Dillingham Alaska
Re: WCSTA -14- 152004 T2 1959 Cab
Hay Vic: When I roll the wheel the other side rolls the opposite way. but the input shaft is not turning it, feels like its in gear and can not turn input by hand. It like its not locking in the wheels Not sure if its in the adjustment or internal. Has a friend open it up, and inspect it never replaced anything it looked clean.
1954 coup
1959 Cab
1959 super coup
1970 240z first year
1971 240z
1959 Cab
1959 super coup
1970 240z first year
1971 240z
- Vic Skirmants
- Registry Hall of Fame
- Posts: 9300
- Joined: Tue Oct 27, 2009 5:02 pm
- Location: SE Michigan
- Contact:
Re: WCSTA -14- 152004 T2 1959 Cab
That is what it is supposed to do. Put an old clutch disc on the input shaft; I'll bet you can turn it then.Alfred Knittel wrote:Hay Vic: When I roll the wheel the other side rolls the opposite way. but the input shaft is not turning it, feels like its in gear and can not turn input by hand. It like its not locking in the wheels Not sure if its in the adjustment or internal. Has a friend open it up, and inspect it never replaced anything it looked clean.
-
- 356 Fan
- Posts: 225
- Joined: Fri Jan 06, 2012 10:51 am
- Location: Eagle Idaho/Dillingham Alaska
Re: WCSTA -14- 152004 T2 1959 Cab
I tried the clutch plate , I can turn the input shaft when in gear it feels like it is slipping over the gears not quite engaged an not rolling the wheels. is there any to adjust other then shifting plate
1954 coup
1959 Cab
1959 super coup
1970 240z first year
1971 240z
1959 Cab
1959 super coup
1970 240z first year
1971 240z
- Vic Skirmants
- Registry Hall of Fame
- Posts: 9300
- Joined: Tue Oct 27, 2009 5:02 pm
- Location: SE Michigan
- Contact:
Re: WCSTA -14- 152004 T2 1959 Cab
When turning the input shaft when in gear, the wheels won't turn? Same in reverse? No adjustment.
-
- 356 Fan
- Posts: 225
- Joined: Fri Jan 06, 2012 10:51 am
- Location: Eagle Idaho/Dillingham Alaska
Re: WCSTA -14- 152004 T2 1959 Cab
yes I can feel the gears bump when I turn the shaft , wheels do not turn I can get in all five gears same thing
1954 coup
1959 Cab
1959 super coup
1970 240z first year
1971 240z
1959 Cab
1959 super coup
1970 240z first year
1971 240z
- Vic Skirmants
- Registry Hall of Fame
- Posts: 9300
- Joined: Tue Oct 27, 2009 5:02 pm
- Location: SE Michigan
- Contact:
Re: WCSTA -14- 152004 T2 1959 Cab
You mentioned that the trans was rebuilt. The only explanation I come up with is that the ring gear bolts are broken? So the ring gear turns when in gear, and the differential works as designed.