Beige Mats
-
- 356 Fan
- Posts: 60
- Joined: Sat Nov 21, 2009 8:13 pm
Beige Mats
As many of you already know, VeloceSpace supplies the only beige mats on the market; these are of very high quality and accuracy, but we are always happy to improve when there's room for such.
We are (and have been) attempting to get the beige color as close as possible to the original (or what we see in purportedly "original" cars today), and our supplier in Italy is ready to take on the project as soon as we find a good sample. We've requested samples from this group before, but have not been successful. We'd like to try again.
If anyone can "loan" us a beige mat (one of the rear floor mats, being the smallest), we'd be happy to apply a 30% discount toward a brand new set of beige mats once they're ready (within two months or so). We need this mat for color-matching purposes only; it will not be cut up or subjected to any physical stress that would change its shape or color. Our supplier has been extremely good at returning samples to us in original condition, so we're confident that we can return your mat to you unharmed after a few weeks in Italy. If you are interested, we'd be happy to speak to you on the phone (408) 335-5990, or communicate via e-mail/private message here.
Thanks in advance, and we look forward to offering well-reproduced beige mats in a few months, with your help.
We are (and have been) attempting to get the beige color as close as possible to the original (or what we see in purportedly "original" cars today), and our supplier in Italy is ready to take on the project as soon as we find a good sample. We've requested samples from this group before, but have not been successful. We'd like to try again.
If anyone can "loan" us a beige mat (one of the rear floor mats, being the smallest), we'd be happy to apply a 30% discount toward a brand new set of beige mats once they're ready (within two months or so). We need this mat for color-matching purposes only; it will not be cut up or subjected to any physical stress that would change its shape or color. Our supplier has been extremely good at returning samples to us in original condition, so we're confident that we can return your mat to you unharmed after a few weeks in Italy. If you are interested, we'd be happy to speak to you on the phone (408) 335-5990, or communicate via e-mail/private message here.
Thanks in advance, and we look forward to offering well-reproduced beige mats in a few months, with your help.
Patrick Hung
Vintage Pistons
Website: www.vintagepistons.com
E-mail: info@vintagepistons.com
Vintage Pistons
Website: www.vintagepistons.com
E-mail: info@vintagepistons.com
-
- 356 Fan
- Posts: 26
- Joined: Sat Apr 05, 2008 2:34 pm
- Location: Nelson New Zealand
Re: Beige Mats
Patrick I have a old tan mat I removed due to its poor condition.I cut the bottom pieces apart as they were not to bad.I have some pieces I could send you. Sandy in Nelson NZ
Sandy Sandberg
-
- 356 Fan
- Posts: 60
- Joined: Sat Nov 21, 2009 8:13 pm
Re: Beige Mats
Sandy, I may have found a local source in San Francisco for a sample of these tan mats, and will try it first. If this falls through, I'll contact you for those small pieces that you have.
Thanks!
Thanks!
Patrick Hung
Vintage Pistons
Website: www.vintagepistons.com
E-mail: info@vintagepistons.com
Vintage Pistons
Website: www.vintagepistons.com
E-mail: info@vintagepistons.com
- Joris Koning
- 356 Fan
- Posts: 2517
- Joined: Thu Mar 27, 2008 12:38 pm
- Location: Netherlands
Re: Beige Mats
Patrick,
If you want your mats to be even more authentic have your supplier also add the part number and the manufacturer logo like the originals had. If you could do that it would be great! The same goes for the black mats.
Joris
If you want your mats to be even more authentic have your supplier also add the part number and the manufacturer logo like the originals had. If you could do that it would be great! The same goes for the black mats.
Joris
Last edited by Joris Koning on Mon Nov 14, 2011 3:58 pm, edited 1 time in total.
'56 Coupe
'57 Coupe
'59 Cab
'60 Coupe
'57 Coupe
'59 Cab
'60 Coupe
-
- 356 Fan
- Posts: 60
- Joined: Sat Nov 21, 2009 8:13 pm
Re: Beige Mats
That's a great idea, Joris... I'll see if my supplier can modify the molds a bit to accommodate these changes.
Thanks for the suggestion!
Thanks for the suggestion!
Patrick Hung
Vintage Pistons
Website: www.vintagepistons.com
E-mail: info@vintagepistons.com
Vintage Pistons
Website: www.vintagepistons.com
E-mail: info@vintagepistons.com
- Sebastian Gaeta
- 356 Fan
- Posts: 3058
- Joined: Tue Mar 25, 2008 5:50 pm
- Location: Ann Arbor, MI
Re: Beige Mats
Hi Patrick,
Here is am image of the part number and mfr logo from an original mat.
Here is am image of the part number and mfr logo from an original mat.
Sebastian Gaeta
www.arbormotion.com
Registry #8339
'65 C coupe
'64 C cab
-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle
www.arbormotion.com
Registry #8339
'65 C coupe
'64 C cab
-------
2014 Boxster 981
2005 997 C2 Cab
1967 Karmann Ghia Convertible
1966 VW Single Cab
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle
- Ron LaDow
- 356 Fan
- Posts: 8094
- Joined: Wed Mar 26, 2008 11:45 am
- Location: San Francisco
Re: Beige Mats
Contrarian POV:
I made and had made parts for the vintage F-1 we raced. Each part had an "R" stamped on it to denote it was a "reproduction". The alternative is to attempt to deceive a buyer that the part is truly an "original" and I don't think that's a good idea.
I made and had made parts for the vintage F-1 we raced. Each part had an "R" stamped on it to denote it was a "reproduction". The alternative is to attempt to deceive a buyer that the part is truly an "original" and I don't think that's a good idea.
Ron LaDow
www.precisionmatters.biz
www.precisionmatters.biz
-
- 356 Fan
- Posts: 60
- Joined: Sat Nov 21, 2009 8:13 pm
Re: Beige Mats
Point well-taken. The part number is one thing, but the original manufacturer's logo may be a copyright-related issue... unless that logo is no longer trademark-protected.Ron LaDow wrote:Contrarian POV:
I made and had made parts for the vintage F-1 we raced. Each part had an "R" stamped on it to denote it was a "reproduction". The alternative is to attempt to deceive a buyer that the part is truly an "original" and I don't think that's a good idea.
Inscribing an "R" basically defeats the purpose of even attempting this, in my opinion.
Patrick Hung
Vintage Pistons
Website: www.vintagepistons.com
E-mail: info@vintagepistons.com
Vintage Pistons
Website: www.vintagepistons.com
E-mail: info@vintagepistons.com
- Greg Scallon
- 356 Fan
- Posts: 787
- Joined: Thu Mar 27, 2008 1:12 pm
- Location: Los Altos, CA
Re: Beige Mats
Or use the logo but simply replace one of the small letters inside with an R. That way it looks pretty darn authentic but can be picked out of a lineup if anyone's so anal to care.
'58 Speedster
'56 VW Deluxe Microbus
'56 VW Deluxe Microbus
-
- 356 Fan
- Posts: 60
- Joined: Sat Nov 21, 2009 8:13 pm
Re: Beige Mats
Another good idea.Greg Scallon wrote:Or use the logo but simply replace one of the small letters inside with an R. That way it looks pretty darn authentic but can be picked out of a lineup if anyone's so anal to care.
One concern that just came to me: do beige and black mats share the same part number? I believe that these mats share the same mold as used by our supplier, with the only differing factor being color masterbatch used. If the part numbers are different, we'd be in a bind, as commissioning a separate mold would be out of the question.
Patrick Hung
Vintage Pistons
Website: www.vintagepistons.com
E-mail: info@vintagepistons.com
Vintage Pistons
Website: www.vintagepistons.com
E-mail: info@vintagepistons.com
- Joris Koning
- 356 Fan
- Posts: 2517
- Joined: Thu Mar 27, 2008 12:38 pm
- Location: Netherlands
Re: Beige Mats
I would suggest you place your company logo on the back of the mat. That way it is clear it is a reprodution but not when installed in the car.
'56 Coupe
'57 Coupe
'59 Cab
'60 Coupe
'57 Coupe
'59 Cab
'60 Coupe
- Ron LaDow
- 356 Fan
- Posts: 8094
- Joined: Wed Mar 26, 2008 11:45 am
- Location: San Francisco
Re: Beige Mats
Joris,
I'm looking for a 'thumbs up' tab; that's a wonderful way to keep the appearance and not degrade the folks who have managed to keep an original in good shape.
I'm looking for a 'thumbs up' tab; that's a wonderful way to keep the appearance and not degrade the folks who have managed to keep an original in good shape.
Ron LaDow
www.precisionmatters.biz
www.precisionmatters.biz
- Barry Brisco
- 356 Fan
- Posts: 3977
- Joined: Sun Mar 09, 2008 4:41 pm
- Tag: Porsche enthusiast
- Location: San Francisco
- Contact:
Re: Beige Mats
Joris, excellent suggestion! On a repro product like a mat, it can be made to look 100% "correct" but on the underside can still contain a clear indication that it is not an "original" (vintage) mat.Joris Koning wrote:I would suggest you place your company logo on the back of the mat. That way it is clear it is a reproduction but not when installed in the car.
Thanks,
Barry Brisco
1959 356A Coupe 105553, Ivory / Brown
2009 987 Cayman, Carrera White / Beige (daily driver)
1959 356A Coupe 105553, Ivory / Brown
2009 987 Cayman, Carrera White / Beige (daily driver)
-
- 356 Fan
- Posts: 60
- Joined: Sat Nov 21, 2009 8:13 pm
Re: Beige Mats
Does that say FISCO in that triangular logo?Sebastian Gaeta wrote:Hi Patrick,
Here is am image of the part number and mfr logo from an original mat.
Patrick Hung
Vintage Pistons
Website: www.vintagepistons.com
E-mail: info@vintagepistons.com
Vintage Pistons
Website: www.vintagepistons.com
E-mail: info@vintagepistons.com
- Peter Silten
- 356 Fan
- Posts: 1643
- Joined: Tue Aug 26, 2008 2:27 pm
Re: Beige Mats
I agree that it looks like FISCO.
Last edited by Peter Silten on Wed Nov 23, 2011 12:50 pm, edited 1 time in total.