TECHNOMAGNESIO rims in the USA?

356 Porsche-related discussions and questions.
Post Reply
Message
Author
User avatar
David H Gill
356 Fan
Posts: 26
Joined: Wed Apr 02, 2008 8:34 pm

TECHNOMAGNESIO rims in the USA?

#1 Post by David H Gill »

Any idea if a vendor has these rims for sale in the US?

Thanks

David
David H Gill

User avatar
Tom Roos
356 Fan
Posts: 107
Joined: Sun Mar 30, 2008 6:52 am

#2 Post by Tom Roos »

There is an ad in the latest issue of the Registry magazine stating "Tecnomagnesio is Back".
website is www.classicocorsa.it

States they weigh 12 pounds. Curious, the ones I purchased stateside 3-4 years ago weigh about 9 to 9.5 pounds.
Tom Roos

User avatar
Barry Brisco
356 Fan
Posts: 3977
Joined: Sun Mar 09, 2008 4:41 pm
Tag: Porsche enthusiast
Location: San Francisco
Contact:

#3 Post by Barry Brisco »

The seller has an ad in the Classifieds at http://356registry.com/forum/viewtopic.php?t=21750

I believe he will ship to the US.

Regarding the weight, he stated that his wheels are 12.2 lbs. When asked why the weight was so much more than the originals, he said:
Reinhold Plank wrote:"the wheel is made from an aluminium-magnesium mix, but with more aluminium now as the vintage wheels. the vintage and later repros had no street homologation, made for race use only. to pass the very rigorous German TUV tests + get them street approved the had to rise the aluminium part to make it stronger, about this the higher weight"
Barry Brisco
1959 356A Coupe 105553, Ivory / Brown
2009 987 Cayman, Carrera White / Beige (daily driver)

User avatar
Gary Koehler
356 Fan
Posts: 374
Joined: Wed Apr 09, 2008 2:22 pm

TECHNOMAGNESIO rims in the USA?

#4 Post by Gary Koehler »

I got a set of 4 Technomagnesio wheels from Reinhard about 2 weeks ago, shipped direct.

Edwin Ek
356 Fan
Posts: 1898
Joined: Sat Jun 21, 2008 11:16 am
Location: Santa Monica, CA

#5 Post by Edwin Ek »

Reinhold also points out that the new rims can be run with tubeless tires. Saving the weight of a tube brings it close to a wash.
#6386

User avatar
Barry Brisco
356 Fan
Posts: 3977
Joined: Sun Mar 09, 2008 4:41 pm
Tag: Porsche enthusiast
Location: San Francisco
Contact:

#6 Post by Barry Brisco »

Edwin Ek wrote:Reinhold also points out that the new rims can be run with tubeless tires. Saving the weight of a tube brings it close to a wash.
Edwin, you use tubes with your 356 wheels, of any type? Why? See this article for why there is no need to use tubes on 356-era wheels, Technomagnesio or otherwise:
http://www.356registry.com/techinfo/rep ... eeded.html
Rick Dill wrote:Now the real truth is that tubes will blow out at least 10 times as often as tubeless and that is what rolls over the SUVs and occasionally a 356. So even if the tire isn't as well contained because of no "safety bead" on the rim, it is far less likely to cause damage if it is tubeless because it will go down slowly, and unless you really aren't paying attention and have power steering (obviously not if you're drivng your 356), you will recognize a soft tire. So, if the rim holds air then you should go tubeless. It is that simple. Then, of course, don't drive over fallen logs, rocks, or similar obstacles at speed.
Geoff Fleming wrote:Tube tires are rarely used today. I would say that 99% of 356 owners use modern radial tires. In the So. Connecticut Registry, no one uses tubeless tires and our cars are driven some long distances at modern highway speeds. No 356 rims have such ridges [the "safety bead"] and all 356 rims accept tubeless radial tires. After more than 250,000 miles of hard driving I`ve never had the slightest problem with tires/rims. Forget the tubes: this is the 21st century.
And there are more opinions on that page.

Best regards,

Barry

User avatar
Steve Proctor
356 Fan
Posts: 1318
Joined: Fri Mar 28, 2008 12:15 am
Location: Spring Hill, TN

Re: TECHNOMAGNESIO rims in the USA?

#7 Post by Steve Proctor »

David, Peter McCurdy up in the Phoenix area had several sets recently. You might check with him for a ready source in the US.

STP
STP
Steve Proctor
Member Since 1977
VIN 84757

Post Reply