CAD Drawing Needed!

For off-topic posts only (i.e. non 356 related content). No politics, religion or obscenity. Play nice!
Message
Author
User avatar
EricMcKinley
356 Fan
Posts: 983
Joined: Sat Dec 21, 2013 12:09 pm
Location: Belfast, Northern Ireland

Re: CAD Drawing Needed!

#16 Post by EricMcKinley » Mon Jul 08, 2019 12:52 pm

Good to hear from you Vic, it's been a while.

Its good to see your protective nature coming out once again, nice shot about the 4th July, but I wasn't around then, so don't blame me on that😇

User avatar
Sebastian Gaeta
356 Fan
Posts: 2594
Joined: Tue Mar 25, 2008 5:50 pm
Location: Ann Arbor, MI

Re: CAD Drawing Needed!

#17 Post by Sebastian Gaeta » Mon Jul 08, 2019 6:43 pm

Vic Skirmants wrote:
Mon Jul 08, 2019 7:59 am
You think he might be a little busy, so can't find the time to answer you immediately?
We Yanks have been celebrating our own BREXIT here around July 4. :D
Hi Vic,

Spot on as usual. Just got back from Nashville visiting my daughters and did not go online much. As for Eric, I've had to interact with him before and am not at all surprised by the snarky tone.

As for the CAD drawing, keep in mind that the actual CAD file is not mine to give away since Bob Watts is the one who created it. It is my design but not my file so I guess I would need his permission to pass it on to anyone else.
Sebastian Gaeta
www.arbormotion.com

Registry #8339

'65 C coupe
'64 C cab
--------
2005 997 C2 Cab
2001 996 C4
1998 Boxster
1967 Karmann Ghia Convertible
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle

User avatar
Vic Skirmants
356 Registry Member
Posts: 7080
Joined: Tue Oct 27, 2009 5:02 pm
Location: SE Michigan

Re: CAD Drawing Needed!

#18 Post by Vic Skirmants » Mon Jul 08, 2019 6:54 pm

"snarky tone."
Yeah, that's been my experience too.

User avatar
EricMcKinley
356 Fan
Posts: 983
Joined: Sat Dec 21, 2013 12:09 pm
Location: Belfast, Northern Ireland

Re: CAD Drawing Needed!

#19 Post by EricMcKinley » Mon Jul 08, 2019 11:46 pm

Fellas, you both know why we had words, I am not the type to mention anything on the forum, or lower myself to name calling.

There appears to be only 2 people I have had a run in on the forum and its not unusual both have a common ground and come to each other's side for support. Enough said, you got your open forum guys lets leave it at that.

User avatar
Vic Skirmants
356 Registry Member
Posts: 7080
Joined: Tue Oct 27, 2009 5:02 pm
Location: SE Michigan

Re: CAD Drawing Needed!

#20 Post by Vic Skirmants » Tue Jul 09, 2019 7:32 am

:D :D :D

Bob Watts
356 Fan
Posts: 384
Joined: Wed Jul 16, 2008 11:55 am
Location: Pocatello, Idaho

Re: CAD Drawing Needed!

#21 Post by Bob Watts » Tue Jul 09, 2019 11:19 am

It is not my project to give away so I did not answer.
As far as the dxf file, it would be fine with me. But that is up to Sebastian.
Bob Watts

User avatar
Sebastian Gaeta
356 Fan
Posts: 2594
Joined: Tue Mar 25, 2008 5:50 pm
Location: Ann Arbor, MI

Re: CAD Drawing Needed!

#22 Post by Sebastian Gaeta » Tue Jul 09, 2019 11:34 am

Bob Watts wrote:
Tue Jul 09, 2019 11:19 am
It is not my project to give away so I did not answer.
As far as the dxf file, it would be fine with me. But that is up to Sebastian.

Thanks Bob. I'll be happy to forward it to anyone who wants it but perhaps they may want to wait to see how mine turn out and of I encountered any issues.
Sebastian Gaeta
www.arbormotion.com

Registry #8339

'65 C coupe
'64 C cab
--------
2005 997 C2 Cab
2001 996 C4
1998 Boxster
1967 Karmann Ghia Convertible
1966 Ducati Cafe Racer
1964 Karmann Ghia Coupe
1963 Beetle

Post Reply